Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Enhancement of thermal buckling strength of laminated sandwich composite panel structure embedded with shape memory alloy fibre

  • Katariya, Pankaj V. (Department of Mechanical Engineering, NIT Rourkela) ;
  • Panda, Subrata K. (Department of Mechanical Engineering, NIT Rourkela) ;
  • Hirwani, Chetan K. (Department of Mechanical Engineering, NIT Rourkela) ;
  • Mehar, Kulmani (Department of Mechanical Engineering, NIT Rourkela) ;
  • Thakare, Omprakash (Department of Mechanical Engineering, G.D. Rungta College of Engineering)
  • Received : 2017.06.15
  • Accepted : 2017.08.17
  • Published : 2017.11.25
⟨ Previous Next ⟩

Abstract

The present article reported the thermal buckling strength of the sandwich shell panel structure and subsequent improvement of the same by embedding shape memory alloy (SMA) fibre via a general higher-order mathematical model in conjunction with finite element method. The geometrical distortion of the panel structure due to the temperature is included using Green-Lagrange strain-displacement relations. In addition, the material nonlinearity of SMA fibre due to the elevated thermal environment also incorporated in the current analysis through the marching technique. The final form of the equilibrium equation is obtained by minimising the total potential energy functional and solved computationally with the help of an original MATLAB code. The convergence and the accuracy of the developed model are demonstrated by solving similar kind of published numerical examples including the necessary input parameter. After the necessary establishment of the newly developed numerical solution, the model is extended further to examine the effect of the different structural parameters (side-to-thickness ratios, curvature ratios, core-to-face thickness ratios, volume fractions of SMA fibre and end conditions) on the buckling strength of the SMA embedded sandwich composite shell panel including the different geometrical configurations.

Keywords

References

  1. Asadi, H., Kiani, Y., Aghdam M.M. and Shakeri, M. (2015), "Enhanced thermal buckling of laminated composite cylindrical shells with shape memory alloy", J. Compos. Mater., 50(2), 243-256,. https://doi.org/10.1177/0021998315573287
  2. Babu, C.S. and Kant, T. (2000), "Refined higher order finite element models for thermal buckling of laminated composite and sandwich plates", J. Therm. Stresses, 23(2), 111-130. https://doi.org/10.1080/014957300280489
  3. Birman, V. (1997a), "Stability of functionally graded shape memory alloy sandwich panels", Smart Mater. Struct., 6, 278-286,. https://doi.org/10.1088/0964-1726/6/3/006
  4. Birman, V. (1997b), "Theory and comparison of the effect of composite and shape memory alloy stiffeners on stability of composite shells and plates", Int. J. Mech. Sci., 39(10), 1139-1149. https://doi.org/10.1016/S0020-7403(97)00008-8
  5. Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422. https://doi.org/10.12989/sem.2016.58.3.397
  6. Bourada, M., Tounsi, A., Houari, M.S.A. and Bedia, E.A.A. (2011), "A new four-variable refined plate theory for thermal buckling analysis of functionally graded sandwich plates", J. Sandwi. Struct. Mater., 14(1), 5-33. https://doi.org/10.1177/1099636211426386
  7. Chalak, H.D., Chakrabarti, A. Sheikh, A.H. and Iqbal, M.A. (2015), "Stability analysis of laminated soft core sandwich plate using HOZT", Mech. Adv. Mater. Struct., 22(11), 897-907. https://doi.org/10.1080/15376494.2013.874061
  8. Chikh, A., Tounsi, A., Hebali H. and Mahmoud, S.R. (2017), "Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT", Smart Mater. Syst., 19(3), 289-297.
  9. Cook, R.D., Malkus, D.S., Plesha, M.E. and Witt, R.J. (2000), Concepts and Applications of Finite Element Analysis, John Wiley & Sons Pte. Ltd., Singapore.
  10. Dehkordia, M.B. and Khalili, S.M.R. (2015), "Frequency analysis of sandwich plate with active SMA hybrid composite facesheets and temperature dependent flexible core", Compos. Struct., 123, 408-419. https://doi.org/10.1016/j.compstruct.2014.12.068
  11. Fantuzzi, N., Tornabene, F., Bacciocchi, M., Neves, A.M.A. and Ferreira, A.J.M. (2017), "Stability and accuracy of three Fourier expansion-based strong form finite elements for the free vibration analysis of laminated composite plates", Int. J. Numer. Meth. Engng, DOI: 10.1002/nme.5468.
  12. Fazzolari, F.A. and Carrera, E. (2013), "Thermo-mechanical buckling analysis of anisotropic multilayered composite and sandwich plates by using refined variable-kinematics theories", J. Therm. Stresses, 36(4), 321-350. https://doi.org/10.1080/01495739.2013.770642
  13. Hassanli, S. and Samali, B. (2016), "Buckling analysis of laminated composite curved panels reinforced with linear and non-linear distribution of shape memory alloys", Thin Wall. Struct., 106, 9-17. https://doi.org/10.1016/j.tws.2016.04.022
  14. Juhasz, Z. and Szekrenyes, A. (2015a), "Progressive buckling of a simply supported delaminated orthotropic rectangular composite plate", Int. J. Solids Struct., 69-70, 217-229. https://doi.org/10.1016/j.ijsolstr.2015.05.028
  15. Juhasz, Z. and Szekrenyes, A. (2015b), "Estimation of local delamination buckling in orthotropic composite plates using Kirchhoff plate finite elements", Math. Probl. Eng., DOI: 10.1155/2015/749607.
  16. Kaci, A., Draiche, K., Zidi, M., Houari, M.S.A. and Tounsi, A. (2013), "An efficient and simple refined theory for nonlinear bending analysis of functionally graded sandwich plates", J. Appl. Mech. Tech. Phys., 54(5), 847-856. https://doi.org/10.1134/S0021894413050180
  17. Kant, T. and Babu, C.S. (2000) "Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models", Compos. Struct., 49, 77-85. https://doi.org/10.1016/S0263-8223(99)00127-0
  18. Katariya, P.V. and Panda, S.K. (2016) "Thermal buckling and vibration analysis of laminated composite curved shell panel", Aircr Eng Aerosp Tec., 88(1), 97-107. https://doi.org/10.1108/AEAT-11-2013-0202
  19. Kettaf, F.Z., Houari, M.S.A., Benguediab M. and Tounsi, A. (2013), "Thermal buckling of functionally graded sandwich plates using a new hyperbolic shear displacement model", Steel Compos. Struct., 15(4), 399-423. https://doi.org/10.12989/scs.2013.15.4.399
  20. Kumar, S.K. and Singh, B.N. (2009), "Thermal buckling analysis of SMA fibre-reinforced composite plates using layerwise model", J. Aerosp. Eng., 22, 342-353. https://doi.org/10.1061/(ASCE)0893-1321(2009)22:4(342)
  21. Kuo, S.Y., Shiau, L.C. and Chen K.H. (2009), "Buckling analysis of shape memory alloy reinforced composite laminates", Compos. Struct., 90, 188-195. https://doi.org/10.1016/j.compstruct.2009.03.007
  22. Lee, H.J. and Lee, J.J. (2000), "A numerical analysis of the buckling and postbuckling behavior of laminated composite shells with embedded shape memory alloy wire actuators", Smart Mater. Struct., 9, 780-787. https://doi.org/10.1088/0964-1726/9/6/307
  23. Meiche, N.E., Tounsi, A., Ziane, N., Mechab, I. and Bedia, E.A.A. (2011), "A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate", Int. J. Mech. Sci., 53, 237-247. https://doi.org/10.1016/j.ijmecsci.2011.01.004
  24. Panda, S.K. (2009), "Nonlinear Vibration Analysis of Thermally Post-buckled Composite Shell Panels with and without Shape Memory Alloy Fibres", Doctoral Dissertation. Indian Institute of Technology Kharagpur, West Bengal, India.
  25. Panda, S.K. and Singh, B.N. (2013), "Nonlinear finite element analysis of thermal post-buckling vibration of laminated composite shell panel embedded with SMA fibre", Aerosp. Sci. Technol., 29, 47-57. https://doi.org/10.1016/j.ast.2013.01.007
  26. Parhi, A. and Singh, B.N. (2016), "Nonlinear free vibration analysis of shape memory alloy embedded laminated composite shell panel", Mech. Adv. Mater. Struct., DOI: 10.1080/15376494.2016.1196777.
  27. Park, J.S., Kim, J.H. and Moon, S.H. (2004), "Vibration of thermally post-buckled composite plates embedded with shape memory alloy fibers", Compos. Struct., 63(2), 179-188. https://doi.org/10.1016/S0263-8223(03)00146-6
  28. Reddy, J.N. (2004), Mechanics of Laminated Composite: Plates and Shells - Theory and Analysis, CRC Press, Boca Raton FL.
  29. Sciuva, M.D. and Carrera, E. (1990), "Static buckling of moderately thick anisotropic laminated and sandwich cylindrical shell panels", AIAA J., 28(10), 1782-1793. https://doi.org/10.2514/3.10474
  30. Shao, C. Cao, D. Xu, Y. and Zhao, H. (2016), "Flutter and thermal buckling analysis for composite laminated panel embedded with shape memory alloy wires in supersonic flow", Int. J. Aerosp. Eng., DOI: 10.1155/2016/8562716.
  31. Singh, V. K. and Panda, S.K. (2015), "Large amplitude vibration behaviour of laminated composite spherical shell embedded with piezoelectric layer", Smart Mater. Syst., 16(5), 853-872.
  32. Thai, C.H., Ferreira, A.J.M., Carrera, E. and Nguyen-Xuan, H. (2013), "Isogeometric analysis of laminated composite and sandwich plates using a layerwise deformation theory", Compos. Struct., 104, 196-214. https://doi.org/10.1016/j.compstruct.2013.04.002
  33. Topal, U. (2009b), "Multiobjective optimization of laminated composite cylindrical shells for maximum frequency and buckling load", Mater. Design, 30, 2584-2594. https://doi.org/10.1016/j.matdes.2008.09.020
  34. Topal, U. (2012), "Thermal buckling load optimization of laminated plates with different intermediate line supports", Steel Compos. Struct., 13(3), 207-223. https://doi.org/10.12989/scs.2012.13.3.207
  35. Topal, U. and Uzman, U. (2009a), "Thermal buckling load optimization of angle-ply laminated cylindrical shells", Mater. Design, 30, 532-536. https://doi.org/10.1016/j.matdes.2008.05.052
  36. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2014), "The strong formulation finite element method: stability and accuracy", Fract. Struct. Integ., 29, 251-265.
  37. Tornabene, F., Fantuzzi, N., Viola, E. and Batra, R.C. (2015), "Stress and strain recovery for functionally graded free-form and doubly-curved sandwich shells using higher-order equivalent single layer theory", Compos. Struct., 119, 67-89. https://doi.org/10.1016/j.compstruct.2014.08.005
  38. Zhang, Y. and Zhao, Y.P. (2007a), "A discussion on modeling shape memory alloy embedded in a composite laminate as axial force and elastic foundation", Mater. Design, 28, 1016-1020. https://doi.org/10.1016/j.matdes.2005.11.008
  39. Zhang, Y. and Zhao, Y.P. (2007b), "A study of composite beam with shape memory alloy arbitrarily embedded under thermal and mechanical loadings", Mater. Design, 28, 1096-1115. https://doi.org/10.1016/j.matdes.2006.02.001

Cited by

  1. Post-buckling analysis of non-uniformly heated functionally graded cylindrical shells enhanced by shape memory alloys using classical lamination theory vol.30, pp.16, 2019, https://doi.org/10.1177/1045389x19861794
  2. Galerkin’s approach for buckling analysis of functionally graded anisotropic nanoplates/different boundary conditions vol.35, pp.4, 2017, https://doi.org/10.1007/s00366-018-0664-9
  3. Effect of external force on buckling of cytoskeleton intermediate filaments within viscoelastic media vol.25, pp.3, 2020, https://doi.org/10.12989/cac.2020.25.3.205
  4. A mechanical model to investigate Aedesaegypti mosquito bite using new techniques and its applications vol.11, pp.6, 2017, https://doi.org/10.12989/mwt.2020.11.6.399
  5. Reliability Analysis of Stiffened Aircraft Panels Using Adjusting Mean Value Method vol.58, pp.12, 2017, https://doi.org/10.2514/1.j059636
  6. The nano scale buckling properties of isolated protein microtubules based on modified strain gradient theory and a new single variable trigonometric beam theory vol.10, pp.1, 2017, https://doi.org/10.12989/anr.2021.10.1.015
  7. An analytical solution for equations and the dynamical behavior of the orthotropic elastic material vol.11, pp.4, 2021, https://doi.org/10.12989/acc.2021.11.4.315
  8. On the free vibration response of laminated composite plates via FEM vol.39, pp.2, 2017, https://doi.org/10.12989/scs.2021.39.2.149
  9. Optimization and mathematical modelling of multi-layer beam based on sinusoidal theory vol.79, pp.1, 2017, https://doi.org/10.12989/sem.2021.79.1.109
  10. Mechanical and thermal buckling analysis of laminated composite plates vol.40, pp.5, 2017, https://doi.org/10.12989/scs.2021.40.5.697
  11. Mathematical approach for the effect of the rotation, the magnetic field and the initial stress in the non-homogeneous an elastic hollow cylinder vol.79, pp.5, 2017, https://doi.org/10.12989/sem.2021.79.5.593