Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Total reference-free displacements for condition assessment of timber railroad bridges using tilt

  • Ozdagli, Ali I. (Department of Civil Engineering, University of New Mexico) ;
  • Gomez, Jose A. (Department of Civil Engineering, University of New Mexico) ;
  • Moreu, Fernando (Department of Civil Engineering, University of New Mexico)
  • Received : 2016.04.14
  • Accepted : 2017.10.09
  • Published : 2017.11.25
⟨ Previous Next ⟩

Abstract

The US railroad network carries 40% of the nation's total freight. Railroad bridges are the most critical part of the network infrastructure and, therefore, must be properly maintained for the operational safety. Railroad managers inspect bridges by measuring displacements under train crossing events to assess their structural condition and prioritize bridge management and safety decisions accordingly. The displacement of a railroad bridge under train crossings is one parameter of interest to railroad bridge owners, as it quantifies a bridge's ability to perform safely and addresses its serviceability. Railroad bridges with poor track conditions will have amplified displacements under heavy loads due to impacts between the wheels and rail joints. Under these circumstances, vehicle-track-bridge interactions could cause excessive bridge displacements, and hence, unsafe train crossings. If displacements during train crossings could be measured objectively, owners could repair or replace less safe bridges first. However, data on bridge displacements is difficult to collect in the field as a fixed point of reference is required for measurement. Accelerations can be used to estimate dynamic displacements, but to date, the pseudo-static displacements cannot be measured using reference-free sensors. This study proposes a method to estimate total transverse displacements of a railroad bridge under live train loads using acceleration and tilt data at the top of the exterior pile bent of a standard timber trestle, where train derailment due to excessive lateral movement is the main concern. Researchers used real bridge transverse displacement data under train traffic from varying bridge serviceability levels. This study explores the design of a new bridge deck-pier experimental model that simulates the vibrations of railroad bridges under traffic using a shake table for the input of train crossing data collected from the field into a laboratory model of a standard timber railroad pile bent. Reference-free sensors measured both the inclination angle and accelerations of the pile cap. Various readings are used to estimate the total displacements of the bridge using data filtering. The estimated displacements are then compared to the true responses of the model measured with displacement sensors. An average peak error of 10% and a root mean square error average of 5% resulted, concluding that this method can cost-effectively measure the total displacement of railroad bridges without a fixed reference.

Keywords

References

  1. Association of American Railroads (AAR) (2015), "Freight railroads have spent $575 billion on the rail network since 1980", Retrieved from https://www.aar.org/PublishingImages/Annual%20Outlook%202015/High%20Resolution%20Images/Chart%201_575%20Billion_FINAL.pdf
  2. Association of American Railroads (AAR) (2016), "Economic and fiscal impact analysis of class I railroads", Retrieved from https://www.aar.org/Documents/AAR%20Towson%20Freight%20Rail%20Economic%20Report%20June%202016.pdf
  3. Association of American Railroads (AAR) (2017), "Class I railroad statistics", Retrieved from https://www.aar.org/Documents/Railroad-Statistics.pdf
  4. American Railway Engineering and Maintenance-of-Way Association (AREMA) (2014a), "Rail", Chapter 4, Manual for railway engineering, Vol. 1, Lanham, MD.
  5. American Railway Engineering and Maintenance-of-Way Association (AREMA) (2014b), "Timber structures", Chapter 7, Manual for railway engineering, Vol. 2, Lanham, MD.Balageas, D., Fritzen, C.P. and Guemes, A. (Eds.) (2006), Structural health monitoring (Vol. 493). London, UK: ISTE.
  6. Boore, D.M. (2003), "Analog-to-digital conversion as a source of drifts in displacements derived from digital recordings of ground acceleration", Bull. Seism. Soc. Am., 93(5), 2017-2024. https://doi.org/10.1785/0120020239
  7. Cambridge Systematics, Inc. (2007), National rail freight infrastructure capacity and investment study, Cambridge, MA.
  8. Cho, S., Yun, C.B. and Sim, S.H. (2015), "Displacement estimation of bridge structures using data fusion of acceleration and strain measurement incorporating finite element model", Smart Struct. Syst., 15(3-4), 645-663. https://doi.org/10.12989/sss.2015.15.3.645
  9. Fanning, P. J., Sobczak, L., Boothby, T.E. and Salomoni, V. (2005), "Load testing and model simulations for a stone arch bridge", Bridge Struct. Assess. Des. Constr., 1(4), 367-378. https://doi.org/10.1080/15732480500453532
  10. Faragher, R. (2012), "Understanding the basis of the Kalman filter via a simple and intuitive derivation", IEEE Signal processing Mag., 29(5), 128-132. https://doi.org/10.1109/MSP.2012.2203621
  11. Farrar, C.R. and Worden, K. (2007), "An introduction to structural health monitoring", Philos. T. Roy. Soc. London A, 365(1851), 303-315. https://doi.org/10.1098/rsta.2006.1928
  12. Federal Railroad Administration (FRA) (2010), "Bridge Safety Standards; Final Rule", Retrieved from http://www.fra.dot.gov/eLib/details/L03212.
  13. Federal Railroad Administration (FRA) (2012a), "Freight Railroads Background", Office of Policy, Office of Rail Policy and Development, Federal Railroad Administration. Retrieved from https://www.fra.dot.gov/eLib/Details/L03011.
  14. Federal Railroad Administration (FRA) (2012b), FRA guide to preparing accident/incident reports, http://safetydata.fra.dot.gov/OfficeofSafety/publicsite/downloads/appendixC-TrainaccidentCauseCodes.aspx?State=0 (Nov. 19, 2012).
  15. Gindy, M., Vaccaro, R., Nassif, H. and Velde, J. (2008), "A statespace approach for deriving bridge displacement from acceleration", Comput.-Aided Civ. Infrastruct. Eng., 23(4), 281-290. https://doi.org/10.1111/j.1467-8667.2007.00536.x
  16. Grewal, M.S. and Andrews, A.P. (2001), Kalman filtering: theory and practice using MATLAB.
  17. Hester, D., Brownjohn, J., Bocian, M. and Xu, Y. (2017), "Low cost bridge load test: Calculating bridge displacement from acceleration for load assessment calculations", Eng. Struct., 143, 358-374. https://doi.org/10.1016/j.engstruct.2017.04.021
  18. Hoag, A., Hoult, N.A., Take, W.A., Moreu, F., Le, H. and Tolikonda, V. (2017), "Measuring displacements of a railroad bridge using DIC and accelerometers", Smart Struct. Syst., 19(2), 225-236. https://doi.org/10.12989/sss.2017.19.2.225
  19. Hou, X., Yang, X. and Huang, Q. (2005), "Using inclinometers to measure bridge deflection", J. Bridge Eng., 10(5), 564-569. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:5(564)
  20. Hussain, S.M.A., Garg, V.K. and Singh, S.P. (1980), "Harmonic roll response of a railroad freight car", J. Eng. Ind., 102(3), 282-288. https://doi.org/10.1115/1.3183866
  21. Kalman, R.E. (1960), "A new approach to linear filtering and prediction problems", J. Basic Eng., 82(1), 35-45. https://doi.org/10.1115/1.3662552
  22. Kalman, R.E. and Bucy, R.S. (1961), "New results in linear filtering and prediction theory", J. Basic Eng., 83(1), 95-108. https://doi.org/10.1115/1.3658902
  23. Lee, H.S., Hong, Y.H. and Park, H.W. (2010), "Design of an FIR filter for the displacement reconstruction using measured acceleration in low frequency dominant structures", Int. J. Numer. Meth. Eng., 82(4), 403-434. https://doi.org/10.1002/nme.2769
  24. MATLAB and Statistics Toolbox (2015b), [Computer Software]. The MathWorks, Inc., Natick, Massachusetts, United States.
  25. Moreu, F. and LaFave, J.M. (2012), Current research topics: Railroad bridges and structural engineering. Newmark Structural Engineering Laboratory, University of Illinois at Urbana-Champaign..
  26. Moreu, F., Jo, H., Li, J., Kim, R.E., Cho, S., Kimmle, A. and LaFave, J.M. (2014), "Dynamic assessment of timber railroad bridges using displacements", J. Bridge Eng., 20(10), 04014114. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000726
  27. Moreu-Alonso, F. (2015), Framework for risk-based management and safety of railroad bridge infrastructure using wireless smart sensors (WSS) (Doctoral dissertation, University of Illinois at Urbana-Champaign).
  28. Moreu, F., Li, J., Jo, H., Kim, R.E., Scola, S., Spencer Jr., B.F. and LaFave, J.M. (2015), "Reference-free displacements for condition assessment of timber railroad bridges", J. Bridge Eng., 21(2), 04015052.
  29. Nassif, H.H., Gindy, M. and Davis, J. (2005), "Comparison of laser Doppler vibrometer with contact sensors for monitoring bridge deflection and vibration", NDT & E Int., 38(3), 213-218. https://doi.org/10.1016/j.ndteint.2004.06.012
  30. Nickitopoulou, A., Protopsalti, K. and Stiros, S. (2006), "Monitoring dynamic and quasi-static deformations of large flexible engineering structures with GPS: accuracy, limitations and promises", Eng. Struct., 28(10), 1471-1482. https://doi.org/10.1016/j.engstruct.2006.02.001
  31. Opensees. (2017), Retrieved from: "http://opensees.berkeley.edu/OpenSees/manuals/usermanual/"
  32. Ozdagli, A.I., Gomez. J.A. and Moreu, F. (2017), "Real-time reference-free displacement of railroad bridges during traincrossing events", J. Bridge Eng., 22(10), 04017073. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001113
  33. Park, J.W., Sim, S.H. and Jung, H.J. (2013), "Development of a wireless displacement measurement system using acceleration responses", Sensors, 13(7), 8377-8392. https://doi.org/10.3390/s130708377
  34. PCB Piezotronics. (2015b), "3711E1110G product manual", Retrieved from http://www.pcb.com/Products.aspx?m=3711E1110G.
  35. Psimoulis, P.A. and Stiros, S.C. (2013), "Measuring deflections of a short-span railway bridge using a robotic total station", J. Bridge Eng., 18(2), 182-185. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000334
  36. Quanser. (2016), "Quanser shake table data sheet". Retrieved from http://www.quanser.com/Products/Docs/3985/Shake_Tables_and_Smart_Structures_System_Specifications_v1.6.pdf.
  37. RDP Elcetrosense (2016), "DCTH Series DC to DC LVDT Displacement Transducer". Retrieved from http://www.rdpe.com/ex/dcth.pdf
  38. Rytter, A. (1993),. Vibration Based Inspection of Civil Engineering Structures, 1993. Aalborg University, Denmark.
  39. Shirole, A.M. and Holt, R.C. (1991), Planning for a comprehensive bridge safety assurance program, Transportation Research Record, (1290).
  40. Stephen, G.A., Brownjohn, J.M.W. and Taylor, C.A. (1993), "Measurements of static and dynamic displacement from visual monitoring of the Humber Bridge", Eng. Struct., 15(3), 197-208. https://doi.org/10.1016/0141-0296(93)90054-8
  41. Sundaram, B.A., Parivallal, S., Kesavan, K., Ahmed, A.K.F., Ravisankar, K., Ramanjaneyulu, K. and Iyer, N.R. (2015), "Condition assessment of a prestressed concrete girder and slab bridge for increased axle loadings", J. Sci. Ind. Res., 74, 634-640.
  42. Swerling, P. (1958), A proposed stagewise differential correction procedure for satellite tracking and prediction, Rand Corporation.
  43. Unsworth, J.F. (2010), Design of modern steel railway bridges, CRC Press, Boca Raton, FL., USA.
  44. Uppal, A.S., Rizkalla, S.H. and Pinkney, R.B. (1990), "Response of timber bridges under train loading", Can. J. Civil Eng., 17(6), 940-951. doi:10.1139/l90-106
  45. Villemure, I., Ventura, C.E. and Sexsmith, R.G. (1996), "Impact and ambient vibration testing to assess structural damage in reinforced concrete frames", Proceedings of the SPIE the international society for optical engineering, 1178-1184.
  46. Welch, G. and Bishop, G. (2001), An Introduction to the Kalman Filter/Department of Computer Science, University of North Carolina at Chapel Hill. 2001 (TR 95-041).
  47. Xia, H., Zhang, N. and Guo, W.W. (2006), "Analysis of resonance mechanism and conditions of train-bridge system", J. Sound Vib., 297(3-5), 810-822. https://doi.org/10.1016/j.jsv.2006.04.022
  48. Xia, H., Guo, W.W., Wu, X., Pi, Y.L. and Bradford, M.A. (2008), "Lateral dynamic interaction analysis of a train-girder-pier system", J. Sound Vib., 318(4-5), 927-942. https://doi.org/10.1016/j.jsv.2008.05.002
  49. Yang, J., Li, J.B. and Lin, G. (2005), "A simple approach to integration of acceleration data for dynamic soil-structure interaction analysis", Soil Dyn. Earthq.Eng., 26(8),725-734.
  50. Yu, Y., Zhao, X. and Ou, J. (2012), "A new idea: Mobile structural health monitoring using Smart phones", Proceedings of the Intelligent Control and Information Processing (ICICIP), 2012 Third International Conference on IEEE.
  51. Yu, Y., Liu, H., Li, D., Mao, X. and Ou, J. (2013), "Bridge deflection measurement using wireless mems inclination sensor systems", Int. J. Smart Sens. Intell. Syst., 6(1), 38-57.
  52. Zhang, W., Sun, L.M. and Sun, S.W. (2016), "Bridge-deflection estimation through inclinometer data considering structural damages", J. Bridge Eng., 04016117.