DOI QR코드

DOI QR Code

Study to detect bond degradation in reinforced concrete beams using ultrasonic pulse velocity test method

  • Saleem, Muhammad (Department of Basic Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University)
  • 투고 : 2017.01.20
  • 심사 : 2017.07.03
  • 발행 : 2017.11.25

초록

Concrete technologists have used ultrasonic pulse velocity test for decades to evaluate the properties of concrete. However, the presented research work focuses on the use of ultrasonic pulse velocity test to study the degradation in steel-concrete bond subjected to increasing loading. A detailed experimental investigation was conducted by testing five identical beam specimens under increasing loading. The loading was increased from zero till failure in equal increments. From the experimentation, it was found that as the reinforced concrete beams were stressed from control unloaded condition till complete failure, the propagating ultrasonic wave velocity reduced. This reduction in wave velocity is attributed to the initiation, development, and propagation of internal cracking in the concrete surrounding the steel reinforcement. Using both direct and semidirect methods of testing, results of reduction in wave velocity with evidence of internal cracking at steel-concrete interface are presented. From the presented results and discussion, it can be concluded that the UPV test method can be successfully employed to identify zones of poor bonding along the length of reinforced concrete beam. The information gathered by such testing can be used by engineers for localizing repairs thereby leading to saving of time, labor and cost of repairs. Furthermore, the implementation strategy along with real-world challenges associated with the application of the proposed technique and area of future development have also been presented.

키워드

참고문헌

  1. ACI 228.2R-13 (2013), "Nondestructive test methods for evaluation of concrete in structures", American Concrete Institute Report, Farmington Hills, U.S.A.
  2. ASTM Test Designation C 597-02 (2003), Standard Test Method for Pulse Velocity through Concrete, Annual Book of ASTM Standards, West Conshohocken, PA.
  3. BS 1881, Part 203 (1986), "Recommendations for measurement of velocity of ultrasonic pulses in concrete", British Standards Institution, London.
  4. Chang, P., Flatau, P. and Liu, S. (2003), "Health monitoring of civil infrastructure", Struct. Control Hlth. Monit., 3(2), 257-67.
  5. Chao, W.T. (2015), "Local bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete", Struct. Eng. Mech., 16(3), 449-466.
  6. Cheesman, W.J. (1949), "Dynamic testing of concrete with the soniscope apparatus", Proc. Highw. Res. Board, 29, 176-189.
  7. Chung, H.W. and Law, K.S. (1983), "Diagnosing in situ concrete by ultrasonic pulse technique", Concrete Int., 5(10), 42-49.
  8. Daponte, P., Maceri, F. and Olivito, R.S. (1995), "Ultrasonic signal-processing techniques for the measurement of damage growth in structural materials", IEEE Tran. Instr. Measur., 44(6), 1003-1008. https://doi.org/10.1109/19.475146
  9. Hamidian, M., Shariati, M., Arabnejad, M.M.K. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266.
  10. Jones, R. (1948), The Application of Ultrasonic to the Testing of Concrete, Research, London, 383-396.
  11. Jones, R. and Facaoaru, I. (1969), "Recommendations for testing concrete by the ultrasonic pulse method", Mater. Struct. Res. Test., (RILEM), 2(19), 275-287.
  12. Kaplan, M.F. (1959), "The effects of age and water to cement ratio upon the relation between ultrasonic pulse velocity and compressive strength of concrete", Mag. Concrete Res., 11(32), 85-92. https://doi.org/10.1680/macr.1959.11.32.85
  13. Keating, J., Hannant, D.J. and Hibbert, A.P. (1989), "Correlation between cube strength, ultrasonic pulse velocity and volume change for oil well cement slurries", Cement Concrete Res., 19(714), 1486-1497.
  14. Leslie, J.R. and Cheesman, W.J. (1949), "An ultrasonic method of studying deterioration and cracking in concrete structures", ACI J. Pr., 46(1), 17-23.
  15. Malhotra, V.M. (1976), "Testing hardened concrete: nondestructive methods", ACI Monograph 9, American Concrete Institute.
  16. Mandal, T., Tinjum, J. M. and Edil, T.B. (2016), "Non-destructive testing of cementitiously stabilized materials using ultrasonic pulse velocity test", Tran. Geotech., 6, 97-107. https://doi.org/10.1016/j.trgeo.2015.09.003
  17. Mutlib, N.K., Baharom, S.B., El-Shafie, A. and Nuawi, M.Z. (2016), "Ultrasonic health monitoring in structural engineering: buildings and bridges", Struct. Control Hlth. Monit., 23, 409-422. https://doi.org/10.1002/stc.1800
  18. Ongpeng, J.M., Oreta, A.W. and Hirose, S. (2016), "Effect of load pattern in the generation of higher harmonic amplitude in concrete using nonlinear ultrasonic test", J. Adv. Concrete Technol., 14, 205-214. https://doi.org/10.3151/jact.14.205
  19. Ongpeng, J.M., Oreta, A.W., Hirose, S. and Nakahata, K. (2017), "Nonlinear ultrasonic investigation of concrete with varying aggregate size under uniaxial compression loading and unloading", J. Mater. Civil Eng., 29(2), 04016210. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001726
  20. Pavlopoulou, S., Staszewski, W.J. and Soutis, C. (2013), "Evaluation of instantaneous characteristics of guided ultrasonic waves for structural quality and health monitoring", Struct. Control Hlth. Monit., 20(6), 937-955. https://doi.org/10.1002/stc.1506
  21. Qasrawi, H.Y. and Marie, I.A. (2013), "The use of USPV to anticipate failure in concrete under compression", Cement Concrete Res., 33(12), 2017-2021. https://doi.org/10.1016/S0008-8846(03)00218-7
  22. Rehman, S.K.U., Ibrahim, Z., Memon, S.A. and Jameel, M. (2016), "Nondestructive test method for concrete bridges: A review", Constr. Build. Mater., 107, 58-86. https://doi.org/10.1016/j.conbuildmat.2015.12.011
  23. RILEM Recommendation NDT 1 (1972), "Testing of concrete by the ultrasonic pulse method", RILEM Publications, Paris.
  24. Saleem, M. and Nasir, M. (2016), "Bond evaluation of concrete bolts subjected to impact loading", J. Mater. Struct., 49(9), 3635-3646. https://doi.org/10.1617/s11527-015-0745-9
  25. Saleem, M. and Tsubaki, T. (2010), "Multi-layer model for pull-out behavior of post-installed anchor", Proceedings of the FRAMCOS-7, Fracture Mechanics of Concrete Structures, Aedificatio, Germany, 2, 823-830.
  26. Saleem, M., Al-Kutti, W., Al-Akhras, N. and Haider, H. (2016), "Non-destructive testing method to evaluate the load carrying capacity of concrete anchors", J. Constr. Eng. Manage., 142(5), 17-29.
  27. Selleck, S.F., Landis, E.N., Peterson, M.L., Shah, S.P. and Achenbach, J.D. (1998), "Ultrasonic investigation of concrete with distributed damage", ACI Mater. J., 95(1), 27-39.
  28. Shah, A.A. and Ribakov, Y. (2008), "Non-linear non-destructive evaluation of concrete", Constr. Build. Technol. J., 2, 111-115. https://doi.org/10.2174/1874836800802010111
  29. Shah, A.A. and Ribakov, Y. (2009), "Non-linear ultrasonic evaluation of damaged concrete based on higher order harmonic generation", Mater. Des., 30, 4095-4102. https://doi.org/10.1016/j.matdes.2009.05.009
  30. Sharma, S. and Mukherjee, A. (2015), "Ultrasonic guided waves for monitoring corrosion in submerged plates", Struct. Control Hlth. Monit., 22(1), 19-35. https://doi.org/10.1002/stc.1657
  31. Shih, H.W., Thambiratnam, D.P. and Chan, T.H.T. (2013), "Damage detection in slab-on-girder bridges using vibration characteristics", Struct. Control Hlth. Monit., 20(10), 1271-1290. https://doi.org/10.1002/stc.1535
  32. Sounthararajan, V.M. and Sivakumar, A. (2012), "Ultrasonic tests on setting properties of cementitious systems", ARPN J. Eng. Appl. Sci., 7(11), 1424-35.
  33. Tahar, H.D., Abdebasset, C. and Belkacem, A. (2016), "Interfacial stresses in RC beam bonded with a functionally graded material plate", Struct. Eng. Mech., 60(4), 149-169. https://doi.org/10.12989/sem.2016.60.1.149
  34. Tarun, R.N., Malhotra, M.V. and Popovics, S.J. (2004), The Ultrasonic Pulse Velocity Method, CRC Press LLC, London.
  35. Umais, K., Al-Osta, M.A. and Ibrahim, A. (2017), "Modeling shear behavior of reinforced concrete beams strengthened with externally bonded CFRP sheets", Struct. Eng. Mech., 61(1), 125-142. https://doi.org/10.12989/sem.2017.61.1.125
  36. Whitehurst, E.A. (1951), "Use of soniscope for measuring setting time of concrete", Proc. ASTM, 51, 1166-1186.
  37. Whitehurst, E.A. (1966), "Evaluation of Concrete Properties from Sonic Tests", ACI Monograph 2, American Concrete Institute, 94-107.
  38. Woods, K.B. and McLaughlin, J.F. (1959), "Application of pulse velocity tests to several laboratory studies of materials", Highw. Res. Board Bull., 206-219.
  39. Zhu, X. and Rizzo, P. (2013), "Guided waves for the health monitoring of sign support structures under varying environmental conditions", Struct. Control Hlth. Monit., 20(2),156-172. https://doi.org/10.1002/stc.481
  40. Zongping, C., Jinjun, X., Liang, Y. and Yisheng, S. (2014), "Bond behaviors of shape steel embedded in recycled aggregate concrete and recycled aggregate concrete filled in steel tubes", Struct. Eng. Mech., 17(6), 347-360.

피인용 문헌

  1. Assessing the load carrying capacity of concrete anchor bolts using non-destructive tests and artificial multilayer neural network vol.30, pp.None, 2020, https://doi.org/10.1016/j.jobe.2020.101260
  2. Concrete strength monitoring based on the variation of ultrasonic waveform acquired by piezoelectric aggregates vol.76, pp.5, 2017, https://doi.org/10.12989/sem.2020.76.5.591
  3. Investigation of the effects of corrosion on bond strength of steel in concrete using neural network vol.28, pp.1, 2021, https://doi.org/10.12989/cac.2021.28.1.077