Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지
DOI QR코드

DOI QR Code

Load-Deformation Relationship of Single Bolted Connections

단일볼트 지압접합부의 힘-변형관계

  • Received : 2017.03.28
  • Accepted : 2017.08.23
  • Published : 2017.10.27
Download PDF
⟨ Previous Next ⟩

Abstract

Well designed group bolted connections can exhibit excellent ductile behavior through the bearing mechanism until the occurrence of shear rupture in the bolt or in the connecting plate. This excellent ductility can be utilized in favor of economical connection design. In this study, comprehensive tests on single-bolt bearing connections were conducted and analyzed considering bearing boundary conditions. The primary objective was to propose a generalized bearing strength and load-deformation relationship that can be used for designing group-bolted connections. To this end, new bearing strength formula, deformation limits as well as new load-deformation relationship were first proposed. Especially the proposed load-deformation relationship can reflect the stiffness, strength, and geometrical boundary conditions of the joint. The proposed formula and relationship are validated based on test results.

강구조물을 접합하는 대표적인 두 가지 방법으로는 용접접합과 볼트접합이 있다. 이중 잘 접합된 볼트접합은 지압메카니즘에 의한 강도상승과 연성거동을 기대할 수 있다. 이러한 볼트접합부의 연성능력을 충분히 활용하기 위해 본 연구에서는 합리적인 단일볼트접합부의 힘-변형관계 및 지압강도 산정식을 제안하고자 하였다. 볼트접합부의 경계조건 및 기하학적인 요소를 고려하여 체계적으로 단일볼트 실험을 수행하였다. 현행 설계기준의 볼트접합부의 지압강도 산정식의 모순점을 해결하기 위해 새로운 지압강도 설계식 및 변형한계 산정식을 제안하였다. 또한 접합부의 강성, 강도, 기하학적 조건 등을 반영할 수 있는 힘-변형관계식을 제안하였다. 본 연구에서 제시한 지압강도식 및 힘-변형관계식은 현행설계기준보다 합리적으로 실험결과를 예측하였다.

Keywords

References

  1. Uang, C.M., Sato, A., Hong, J.K., and Wood, K. (2010) Cyclic Testing and Modeling of Cold-Formed Steel Special Bolted Moment Frame Connections, Journal of Structural Engineering, ASCE, Vol.136, No.8, pp.953-960. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000190
  2. Sato, A. and Uang, C.M. (2010) Seismic Performance Factors for Cold-formed Steel Special Bolted Moment Frame. Journal of Structural Engineering, ASCE, Vol.136, No.8, pp.961-967. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000191
  3. 김대경, 이철호, 진승표, 윤성환(2015) 볼트 전단파단이 지배하는 지압형식 볼트접합부의 힘-변형 관계, 한국강구조학회논문집, 한국강구조학회, 제27권, 제1호, pp.1-12. Kim, D.K., Lee, C.H., Jin, S.P., and Yoon S.H. (2015) Seismic Design and Testing of Reduced Beam Section Steel Moment Connections with Bolted Web Attachment, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.1, pp.1-12(in Korean).
  4. 대한건축학회(2016) 건축구조기준 및 해설(KBC 2016), 대한건축학회. Architectural Institute of Korea (2016) Korean Building Code and Commentary, Architectural Institute of Korea (in Korean).
  5. AISC (2010) Specification for Structural Steel Buildings, American Institute of Steel Construction, Inc., Chicago, Illinois, USA.
  6. Yura, J.A. and Frank, K.H. (1994) Meeting of the Research Council on Structural Connections, Minutes of the June 3, 1994.
  7. Frank, K.H. and Yura, J.A. (1981) An Experimental Study of Bolted Shear Connection, Technical Report, U.S. Department of Transportation, Washington, D.C.
  8. Kulak, G.L., Fisher, J.w, and Struik, J.H. (2010) Guide to Design Criteria for Bolted and Riveted Joints, American Institute of Steel Construction, Inc., Chicago, Illinois, USA.
  9. Crawford, S.F. and Kulak, G.L. (1968) Behavior of Eccentrically Loaded Bolted Connections, Studies in Structural Engineering No.4, Nova Scotia Technical College, Canada.
  10. Crawford, S.F. and Kulak, G.L. (1971) Eccentrically Loaded Bolted Connections, Journal of the Structural Division, ASCE, Vol.97, No.3, pp.765-783.
  11. Fisher, J.W. (1964) On the Behavior of Fasteners and Plates with Holes, Fritz Laboratory Repots No.288.18, Lehigh University.
  12. Rex, O.C. and Easterling, W.S. (2003) Composite Behaviors of Shear Studs, Journal of Structural Engineering, ASCE, Vol.129, No.6, pp.792-800. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(792)

Cited by

  1. Experimental Investigation of Bolted Splice for Concrete-Filled Thin-Walled Tube Columns vol.31, pp.4, 2017, https://doi.org/10.7781/kjoss.2019.31.4.261