Computers and Concrete

  • 제20권5호
  • /
  • Pages.511-519
  • /
  • 2017
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of cover cracking on reliability of corroded reinforced concrete structures

  • Chen, Hua-Peng (Department of Engineering Science, University of Greenwich at Medway) ;
  • Nepal, Jaya (School of Architecture, Computing & Engineering, University of East London)
  • 투고 : 2017.07.25
  • 심사 : 2017.08.19
  • 발행 : 2017.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

The reliability of reinforced concrete structures is frequently compromised by the deterioration caused by reinforcement corrosion. Evaluating the effect caused by reinforcement corrosion on structural behaviour of corrosion damaged concrete structures is essential for effective and reliable infrastructure management. In lifecycle management of corrosion affected reinforced concrete structures, it is difficult to correctly assess the lifecycle performance due to the uncertainties associated with structural resistance deterioration. This paper presents a stochastic deterioration modelling approach to evaluate the performance deterioration of corroded concrete structures during their service life. The flexural strength deterioration is analytically predicted on the basis of bond strength evolution caused by reinforcement corrosion, which is examined by the experimental and field data available. An assessment criterion is defined to evaluate the flexural strength deterioration for the time-dependent reliability analysis. The results from the worked examples show that the proposed approach is capable of evaluating the structural reliability of corrosion damaged concrete structures.

키워드

참고문헌

  1. Au, F.T.K. and Du, J.S. (2004), "Prediction of ultimate stress in un-bonded prestressed tendons", Mag. Concrete Res., 56(1), 1-11. https://doi.org/10.1680/macr.2004.56.1.1
  2. Azad, A.K., Ahmad, S. and Al-Gohi, B.H.A. (2010), "Flexural strength of corroded reinforced concrete beams", Mag. Concrete Res., 62(6), 405-414. https://doi.org/10.1680/macr.2010.62.6.405
  3. Azad, A.K., Ahmad, S. and Azher, S.A. (2007), "Residual strength of corrosion-damaged reinforced concrete beams", ACI Mater. J., 104(1), 40-47.
  4. Broomfield, J. (1997), Corrosion of Steel in Concrete: Understanding, Investigating and Repair, E & FN Spon, London, U.K.
  5. Cairns, J. and Zhao, Z. (1993), "Behaviour of concrete beams with exposed reinforcement", Proceedings of the ICE, Structures and Buildings, 99(2), 141-154. https://doi.org/10.1680/istbu.1993.23373
  6. CEB-FIP, CEB-FIP Model Code 1990 (1990), Design Code, Thomas Telford, London, U.K.
  7. Chen, H.P. and Xiao, N. (2012), "Analytical solutions for corrosion-induced cohesive concrete cracking", J. Appl. Math.
  8. Chen, H.P. (2016), "Monitoring based reliability analysis of aging concrete structures by Bayesian updating", J. Aerosp. Eng., B4015004-1-8.
  9. Chen, H.P. and Alani, A.M. (2012), "Reliability and optimised maintenance for sea defences", Proceedings of the ICE, Marit. Eng., 165(2), 51-64.
  10. Chen, H.P. and Alani, A.M. (2013), "Optimized maintenance strategy for concrete structures affected by cracking due to reinforcement corrosion", ACI Struct. J., 110(2), 229-238.
  11. Chen, H.P. and Nepal, J. (2015), "Stochastic modelling and lifecycle performance assessment of bond strength of corroded reinforcement in concrete", Struct. Eng. Mech., 54(2), 319-336. https://doi.org/10.12989/sem.2015.54.2.319
  12. Chen, H.P. and Nepal, J. (2016), "Analytical model for residual bond strength of corroded reinforcement in concrete structures", J. Eng. Mech., 142(2), 04015079-1-8. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000997
  13. Chung, L., Najm, H. and Balaguru, P. (2008), "Flexural behavior of concrete slabs with corroded bars", Cement Concrete Compos., 30(3), 184-193. https://doi.org/10.1016/j.cemconcomp.2007.08.005
  14. Coronelli, D. (2002), "Corrosion cracking and bond strength modelling for corroded bars in reinforced concrete", ACI Struct. J., 99(3), 267-276.
  15. Coronelli, D. and Gambarova, P.G. (2000), "A mechanical model for bond strength of corroded reinforcement in concrete", Proceedings of the 14th Engineering Mechanics Conference, Austin, Texas, U.S.A.
  16. Du, Y.G., Clark, L.A. and Chan, A.H.C. (2005), "Residual capacity of corroded reinforcing bars", Mag. Concrete Res., 57(3), 135-147. https://doi.org/10.1680/macr.2005.57.3.135
  17. Eurocode 2 (2004), Design of Concrete Structure, European Committee for Standardization, Brussels, Belgium.
  18. Fang, C., Lundgren, K., Chen. L. and Zhu, C. (2004), "Corrosion influence on bond in reinforced concrete", Cement Concrete Res., 34(11), 2159-2167. https://doi.org/10.1016/j.cemconres.2004.04.006
  19. Giuriani, E., Plizzari, G. and Schumm, C. (1991), "Role of stirrups and residual tensile strength of cracked concrete on bond", J. Struct. Eng., 117(1), 1-18. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(1)
  20. Horringmoe, G., Saether, I., Antonsen, R. and Arntsen, B. (2007), Laboratory Investigations of Steel Bar Corrosion in Concrete Background Document SB-3.10, Sustainable Bridge, Nourt Technology.
  21. Khan, I., Francois, R. and Castel, A. (2014), "Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams", Cement Concrete Res., 56, 84-96. https://doi.org/10.1016/j.cemconres.2013.11.006
  22. Law, D.W., Tang, D., Molyneaux, T.K.C. and Gravina, R. (2011), "Impact of crack width on bond: Confined and unconfined rebar", Mater. Struct., 44(7), 1287-1296. https://doi.org/10.1617/s11527-010-9700-y
  23. Mangat, P.S. and Elgarf, M.S. (1999), "Flexural strength of concrete beams with corroding reinforcement", ACI Struct. J., 96(1), 149-159.
  24. Nepal, J. and Chen, H.P. (2015), "Risk-based optimum repair planning of corroded reinforced concrete structures", Struct. Monitor. Mainten., 2(2), 133-143. https://doi.org/10.12989/smm.2015.2.2.133
  25. Shang, H.S., Yi, T.H. and Yang, L.S. (2012), "Experimental study on the compressive strength of big mobility concrete with nondestructive testing method", Adv. Mater. Sci. Eng.
  26. Tilly, G.P. and Jacobs, J. (2007), Concrete Repairs-Performance in Service and Current Practice, Willoughby Road, IHS BRE Press, U.K.
  27. Van Noortwijk, J.M. (2009), "A survey of the application of gamma processes in maintenance", Reliab. Eng. Syst. Safety, 94(1), 2-21. https://doi.org/10.1016/j.ress.2007.03.019
  28. Vidal, T., Castel, A. and Francois, R. (2004), "Analyzing crack width to predict corrosion in reinforced concrete", Cement Concrete Res., 34(1), 165-174. https://doi.org/10.1016/S0008-8846(03)00246-1
  29. Wang, X.H. and Liu, X.L. (2010), "Simplified methodology for the evaluation of residual strength of corroded reinforced concrete beams", J. Perform. Constr. Facilit., 24(2), 108-119. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000083
  30. Wang, X.H. and Liu, X.L. (2004), "Modelling effects of corrosion on cover cracking and bond in reinforced concrete", Mag. Concrete Res., 56(4),191-199. https://doi.org/10.1680/macr.2004.56.4.191
  31. Yalciner, H., Eren, O. and Sensoy, S. (2012), "An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover strength and corrosion level", Cement Concrete Res., 42, 643-655. https://doi.org/10.1016/j.cemconres.2012.01.003
  32. Yi, T.H., Li, H.N. and Wang, C.W. (2016), "Multiaxial sensor placement optimization in structural health monitoring using distributed wolf algorithm", Struct. Contr. Health Monitor., 23(4), 719-734. https://doi.org/10.1002/stc.1806
  33. Zhang, R., Castel, A. and Francois, R. (2010), "Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process", Cement Concrete Res., 40(3), 415-425. https://doi.org/10.1016/j.cemconres.2009.09.026
  34. Zhao, Y., Lin, H., Wu, K. and Jin, W. (2013), "Bond behaviour of normal/recycled concrete and corroded steel bars", Constr. Build. Mater., 48, 348-359. https://doi.org/10.1016/j.conbuildmat.2013.06.091