Journal of Power Electronics

  • 제17권6호
  • /
  • Pages.1422-1432
  • /
  • 2017
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

A Buck-Boost Converter-Based Bipolar Pulse Generator

  • Elserougi, Ahmed A. (Department of Electrical Engineering, Qatar University) ;
  • Massoud, Ahmed M. (Department of Electrical Engineering, Qatar University) ;
  • Ahmed, Shehab (Department of Electrical and Computer Engineering, Texas A&M University at Qatar)
  • 투고 : 2017.05.27
  • 심사 : 2017.07.21
  • 발행 : 2017.11.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a buck-boost converter-based bipolar pulse generator, which is able to generate bipolar exponential pulses across a resistive load. The concept of the proposed approach depends on operating the involved buck-boost converters in discontinuous current conduction mode with high-voltage gain and enhanced efficiency. A full design of the pulse generator and its passive components is presented to ensure generating the pulses with the desired specifications (rise time, pulse width, and pulse magnitude) for a given load resistance and input dc voltage. In case of moderate pulsed output voltages (i.e. few of kV), one module of the presented bipolar generator can be employed. While in case of high-voltage pulsed output, multi-module version can be employed, where each module is fed from an isolated dc source and their outputs are connected in series. Simulation models for the proposed approach are built to elucidate their performance in case of one-module as well as multi-module based generator. Finally, a scaled-down prototype for one-module of buck-boost converter-based bipolar pulse generator is implemented to validate the proposed concept.

키워드

과제정보

연구 과제 주관 기관 : Qatar National Research Fund

참고문헌

  1. L. M. Redondo, H. Canacsinh, and J. F. Silva, "Generalized solid-state marx modulator topology," IEEE Trans. Dielectr. Electr. Insul. , Vol. 16, No. 4, pp. 1037-1042, Aug. 2009. https://doi.org/10.1109/TDEI.2009.5211851
  2. H. Canacsinh, L. M. Redondo, and J. F. Silva, "Marx-type solid-state bipolar modulator topologies: performance comparison," IEEE Trans. Plasma Sci., Vol. 40, No. 10, pp.2603-2610, Oct. 2012. https://doi.org/10.1109/TPS.2012.2190944
  3. J. P. M. Mendes, H. Canacsinh, L. M. Redondo, and J. O. Rossi, "Solid state marx modulator with blumlein stack for bipolar pulse generation," IEEE Trans. Dielectr. Electr. Insul. , Vol. 18, No. 4, pp.1199-1204, Aug. 2011. https://doi.org/10.1109/TDEI.2011.5976116
  4. J. Mankowski and M. Kristiansen, "A review of short pulse generator technology," IEEE Trans. Plasma Sci., Vol. 28, No. 1, pp.102-108, Feb. 2000. https://doi.org/10.1109/27.842875
  5. M. Rebersek and D. Miklavcic "Advantages and disadvantages of different concepts of electroporation pulse generation," Automatika, Vol. 52, No. 1, pp. 12-19, Jan. 2011. https://doi.org/10.1080/00051144.2011.11828399
  6. H. Akiyama, S. Sakai, T. Sakugawa, and T. Namihira, "Environmental applications of repetitive pulsed power," IEEE Trans. Dielectr. Electr. Insul., vol. 14, No. 4, pp.825-833, Aug. 2007. https://doi.org/10.1109/TDEI.2007.4286513
  7. H. Canacsinh, L. M. Redondo, and J. Fernando Silva, "New solid-state marx topology for bipolar repetitive high-voltage pulses," IEEE Power Electronics Specialists Conference, pp.791-795, 2008.
  8. J. H. Kim, S. C. Lee, B. K. Lee, S. V. Shenderey, J. S. Kim, and G. H. Rim, "A high-voltage bipolar pulse generator a using push-pull inverter," in Conf. Ind. Electron. Soc., 2003, Vol. 1, pp. 102-107.
  9. L.-R. Chen and N.-Y. Chu, "AC-powered pulse generator," IEEE Trans. Plasma Sci., Vol. 34, No. 5, pp.1858-1865, Oct. 2006. https://doi.org/10.1109/TPS.2006.883420
  10. Y. Wu, K. Liu, J. Qiu, X. Liu, and H. Xiao, "Repetitive and high voltage marx generator using solid-state devices," IEEE Trans. Dielectr. Electr. Insul. , Vol. 14, No. 4, pp. 937-940, Aug. 2007. https://doi.org/10.1109/TDEI.2007.4286529
  11. S. Bae, A. Kwasinski, M. M. Flynn, and R. E. Hebner, "High-power pulse generator with flexible output pattern," IEEE Trans. Power Electron., Vol. 25, No. 7, pp. 1675-1684, Jul. 2010. https://doi.org/10.1109/TPEL.2010.2041012
  12. L. L. Rocha, J. F. Silva, and L. M. Redondo, "Multilevel high-voltage pulse generation based on a new modular solid-state switch," IEEE Trans. Plasma Sci., Vol. 42, No. 10, pp. 2956-2961, Oct. 2014. https://doi.org/10.1109/TPS.2013.2296141
  13. X. Lan, M. Long, X. Zi-jie, X. Qin, Z. De-qing, and Y. Zi-kang, "A novel generator for high-voltage bipolar square pulses with applications in sterilization of microorganism," IEEE Trans. Dielectr. Electr. Insul. , Vol. 22, No. 4, pp.1887-1895, Aug. 2015. https://doi.org/10.1109/TDEI.2014.004805
  14. S. Zabihi, F. Zare, G. Ledwich, A. Ghosh, and H. Akiyama, "A novel high-voltage pulsed-power supply based on low-voltage switch-capacitor units," IEEE Trans. Plasma Sci., Vol. 38 , No. 10 , pp. 2877-2887, Oct. 2010. https://doi.org/10.1109/TPS.2010.2060364
  15. S. Zabihi, F. Zare, G. Ledwich, A. Ghosh, and H. Akiyama, "A new pulsed power supply topology based on positive buck-boost converters concept," IEEE Trans. Dielectr. Electr. Insul., Vol. 17 , No. 6, pp. 1901-1911, Dec. 2010. https://doi.org/10.1109/TDEI.2010.5658245
  16. J. W. Baek, M. H. Ryu, D. W. Yoo, and H. G. Kim, "High voltage pulse generator using boost converter array," 28th IEEE Annual Conference of the Industrial Electronics Society (IECON 02) , Vol. 1, pp. 395-399, 2002.
  17. J.-W. Baek, D.-W. Yoo, G.-H. Rim, and B.-M. Song, "A 2 kV-40 A pulse generator using boost converter array," 14th IEEE International Pulsed Power Conference, Vol. 2, pp. 1423-1426, 2003.
  18. A. Elserougi, A. M. Massoud, A. M. Ibrahim, and S. Ahmed, "A high voltage pulse-generator based on DC-to-DC converters and capacitor-diode voltage multipliers for water treatment applications," IEEE Trans. Dielectr. Electr. Insul. , Vol. 22, No. 6, pp.3290-3298, Dec. 2015. https://doi.org/10.1109/TDEI.2015.005376
  19. A. Elserougi, Shehab Ahmed, and A. Massoud, "A boost converter-based ringing circuit with high-voltage gain for unipolar pulse generation," IEEE Trans. Dielectr. Electr. Insul., Vol. 23, No. 4, pp.2088-2094, Aug. 2016. https://doi.org/10.1109/TDEI.2016.7556482
  20. A. Elserougi, A. Massoud, and S. Ahmed, "A Boost- Inverter-Based Bipolar High-Voltage Pulse Generator," IEEE Trans. Power Electron., Vol. 32, No. 4, pp. 2846-2855, Apr. 2017. https://doi.org/10.1109/TPEL.2016.2576562
  21. M. E. Ibrahim, A. S. Mansour, and A. M. Abd-Elhady, "A novel single-stage single-phase buck-boost inverter," Electrical Engineering, Vol. 99, No.1, pp.345-356, Mar. 2017. https://doi.org/10.1007/s00202-016-0431-0