참고문헌
- Rowe, W. B., Hydrostatic and hybrid bearing design, Butterworth & Co. (Publishers) Ltd., 1983.
- Stansfield, F. M., Hydrostatic bearings for machine tools and similar applications, machinery (London), 1970.
- Shires, G. L., Dee, C. W., Pressurized bearings with inlet slots, 1967, Proc. of the 7th Gas Bearing Symposium, UK, Southampton University.
- Dee, C. W., Shires, G. L., The current state of the art of fluid bearings with discrete slot inlets, Trans. ASME, J. Lub. Tech., Vol. 93, No. 2, pp. 441-450, 1971. https://doi.org/10.1115/1.3451615
- Rowe, W. B., Koshal, D., Stout, K. J., Slot-entry bearings for hybrid hydrodynamic and hydrostatic operation, J. Mech. Engng. Sc., Vol. 18, No. 2, pp. 73-81, 1976. https://doi.org/10.1243/JMES_JOUR_1976_018_014_02
- Rowe, W. B., Koshal, D., Investigation of recessed hydrostatic and slot-entry journal bearings for hybrid hydrodynamic and hydrostatic operation, Wear, Vol. 43, No. 1, pp. 55-69, 1977. https://doi.org/10.1016/0043-1648(77)90043-6
- Rowe, W. B., Koshal, D., A new basis for the optimization hybrid journal bearings, Wear, Vol. 64, pp. 115-131, 1980. https://doi.org/10.1016/0043-1648(80)90097-6
- Koshal, D., Rowe, W. B., Fluid-film journal bearings operating in a hybrid mode: Part I -theoretical analysis and design, Trans. ASME J. Lub. Tech., Vol. 103, No. 4, pp. 558-565, 1981.
- Koshal, D., Rowe, W. B., Fluid-film journal bearings operating in a hybrid mode: Part II - experimental investigation, ASME J. Lub. Tech., Vol. 103, No. 4, pp. 566-572, 1981.
- Rowe, W. B., Chong, F. S., Computation of dynamic force coefficients for hybrid (hydrostatic/hydrodynamic) journal bearings by the finite disturbance and perturbation techniques, Trans. ASME J. Tribol., Vol. 19, No. 5, pp. 260-271, 1986.
- Ives, D., Rowe, W. B., The effect of multiple supply sources on the performance of heavily loaded pressurized high-speed journal bearings, Proc., 50 Year of Tribology Conf. London, IMechE., (London), 1987, Paper C 199/87, July 1-3, pp. 121-127.
- Ives, D., Weston, W., Morton, P. G., Rowe, W. B., A theoretical investigation of hybrid journal bearings applied to high speed heavily loaded conditions requiring jacking capabilities", Proceedings of 15th Leeds- Lyons Symposium on Tribology, September 6-9, 1988, pp. 425-433.
- Ives, D., Rowe, W. B., The performance of hybrid journal bearings in the superlaminar flow regimes, STLE Tribol. Trans., Vol. 35, No. 4, pp. 627-634, 1992. https://doi.org/10.1080/10402009208982165
- Stokes, V. K, Couple stresses in fluids, Phys. Fluids, Vol. 9, No. 9, pp. 1709-1715, 1966. https://doi.org/10.1063/1.1761925
- Ramanaiah, G., and Sarkar, P., Optimum load capacity of a slider bearing lubricated by a fluid with couple stress, Wear, Vol. 49, pp. 61-66, 1978. https://doi.org/10.1016/0043-1648(78)90023-6
- Lin, J. R., Lu, F. N., Hung, C. R., Dynamic characteristics of Wide exponential film-shape slider bearings lubricated with a non-newtonian couple stress fluid, J. Marine Sc. Tech., Vol. 14, No. 2, pp. 93-101, 2006.
- Oladeinde M. H., Akpobi J. A., A comparative study of load capacity and pressure distribution of infinitely wide parabolic and inclined slider bearings, Proc. of World Cong. on Engng., Vol. II, pp. 978-988, 2010.
- Singh, C., Lubrication theory for couple stress fluids and its application to short bearing, Wear, Vol. 80, pp. 281-290, 1982. https://doi.org/10.1016/0043-1648(82)90256-3
- Wang, X. L., Zhu, K. Q., Gui, C. L., A study of a journal bearing lubricated by couple stress fluids considering thermal and cavitation effects, IMechE, Vol. 216, pp. 293-305, 2002.
- Ma, Y. Y., Wang, W. H., and Cheng, X. H., A study of dynamically loaded journal bearings lubricated with non-newtonian couple stress fluids, Tribol. Letters, Vol. 17, No. 1, pp. 69-74, 2004. https://doi.org/10.1023/B:TRIL.0000017420.44627.63
- Saini, P. K., Kumar, P., Tandon, P., Thermal elastohydrodynamic lubrication characteristics of couple stress fluids in rolling/sliding line contacts, IMechE, Vol. 221, Part J: J. Engng. Tribol., pp. 141-153, 2007. https://doi.org/10.1243/13506501JET212
- Mehta, N. P., Rattan, S. S., Verma, R., Stability analysis of two-lobe hydrodynamic journal bearing with couple stress lubricant, APRN J. Engng. Sc. A., Vol. 5, No. 1, pp. 69-74, 2010.
- Chang, C. W., Chen, C. K., Nonlinear analysis of a rub-impact rotor supported by turbulent couple stress fluid film journal bearing under quadratic damping, Nonlinear Dyn., Vol. 56, pp. 297-314, 2009. https://doi.org/10.1007/s11071-008-9400-0
- Jian, C. W. C., Yau, H. T., and Chen, J. L., Nonlinear dynamic analysis of a hybrid squeeze-film dampermounted rigid rotor lubricated with couple stress fluid and active control, Appl. Math. Modelling, Vol. 34, pp. 2493-2507, 2010. https://doi.org/10.1016/j.apm.2009.11.014
- Satish, C. Sharma, Nathi Ram, Influence of couple stress lubricant on the performance of orifice compensated non-recessed hole-entry hybrid journal bearing, Proceedings of STLE/ASME International Joint Tribology Conference IJTC2012, 2012, Denver, Colorado, USA, pp. 143-145.
- Rowe, W. B., Xu, S. X., Chong, F. S., Weston, W., Hybrid Journal Bearings with Particular Reference to Hole-Entry Configurations, Tribol. Int., Vol. 15, No. 6, pp. 339-348, 1982. https://doi.org/10.1016/0301-679X(82)90143-8