Journal of the Korean Society of Marine Environment & Safety (해양환경안전학회지)

The Korean Society of Marine Environment and safety (해양환경안전학회)
권호 표지
DOI QR코드

DOI QR Code

A Comparative Study of Sea Trials and Production Processes for Propulsion Type Working Boats with a Tuna Purse Seiner

다랑어 선망어선 탑재용 보조 작업선의 추진기 형태 변화에 대한 제작과정 및 해상시운전 비교 연구

  • Ha, Seoung-Mu (Green-Ship Research Division, Research Institute of Medium and Small Shipbuilding) ;
  • Jang, Ho-Yun (Green-Ship Research Division, Research Institute of Medium and Small Shipbuilding) ;
  • Seo, Hyoung-Seock (Green-Ship Research Division, Research Institute of Medium and Small Shipbuilding) ;
  • Seo, Kwan-Cheol (Department of Naval Architecture & Ocean Engineering, Mokpo National Maritime University)
  • 하승무 (중소조선연구원 그린선박연구본부) ;
  • 장호윤 (중소조선연구원 그린선박연구본부) ;
  • 서형석 (중소조선연구원 그린선박연구본부) ;
  • 서광철 (목포해양대학교 조선해양공학과)
  • Received : 2017.07.05
  • Accepted : 2017.08.28
  • Published : 2017.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In Korea, much research and development have occurred to enhance the technological competitiveness of tuna purse seining fisheries. Due to these efforts, fishing efficiency has been improved with the development of radar, sonar and global positioning systems for fish detection and revisions to the hull forms of tuna purse seiners. However, for skiff boats, net boats and speed boats, which are auxiliary working boats mounted on tuna purse seiners, technology has lagged behind relative to the modernization of the main vessel. In this study, the hull of an existing propeller-based net boat with steel wire net to protect tuna was changed to the hull of a water jet propulsion vehicle to reduce resistance and improve maneuverability. As a result, a prototype of a water jet propulsion option was produced according to the aluminum structure strength standards specified by the Ministry of Oceans and Fisheries, and safety was confirmed by performing a drop test. Moreover, through a sea trial test, an existing net boat was shown to have a speed of 12.0knots and a towing force of 2,545 kgf at 2,500 RPM. The prototype had a speed of 26.7 knots and a towing force of 2,011 kgf at 3,200 RPM, which satisfied the towing capacity standards of auxiliary working boats mounted on tuna purse seiners.

우리나라에서는 다랑어 선망어업의 기술 경쟁력을 높이기 위한 많은 연구개발이 이루어지고 있으며, 이러한 노력으로 인하여 다랑어 선망어선의 선형개선과 어군 탐지를 위한 레이다, 소나 및 위성정보시스템의 개발로 인해 조업 효율이 향상되었다. 그러나 다랑어 선망어선에 탑재되는 보조 작업선인 스키프보트, 네트보트 및 스피드보트의 경우에는 본선의 기술 현대화에 비해 기술력이 낙후되어 있는 실정이다. 이에 본 논문에서는 그물을 끌기 위한 양망의 기능과 프로펠러로부터 다랑어를 보호하기 위하여 설치된 철망을 가진 기존의 네트보트의 선체를 워터제트 추진기 탑재가 가능한 선체로 변경하여 다랑어 보호, 선체저항 감소 및 운항성능 향상하고자 하였다. 결과적으로 워터제트 형태에 적합한 선형에 대해 해양수산부 고시에 의거한 알루미늄 구조강도 기준을 적용한 시제선 제작하였으며 낙하시험을 수행하여 안전성을 확인하였다. 또한 해상시운전을 통하여 기존의 네트보트는 2,500 RPM에서 속도는 12.0 knot, 예인력은 2,545 kgf이며, 워터제트가 탑재된 네트보트는 3,200 RPM에서 속도는 26.7 knot, 예인력은 2,011 kgf로 워터제트가 탑재된 네트보트 또한 다랑어 선망어선의 보조 작업선으로 예인용량 기준에 충분히 만족함을 알 수 있었다.

Keywords

References

  1. An, D. H., D. Y. Moon, J. R. Koh, K. D. Cho and D. S. Kim(2003), Effect of El Nino Event on the Distribution of Korean Tuna Purse Seine Fishery in the Western Central Pacific Ocean, Journal of the Korean Society of Fisheries Technology, Vol. 6, No. 1, pp. 32-40.
  2. Choi, D. I.(2009), A Study of High Efficiency Water Jet System for Small Vessel, Thesis for the Degree of Master of Engineering, Kunsan National University Graduate School, pp. 9-20.
  3. Hong, J. K., I. K. Kang and S. J. Jung(2015a), Fishing Performance of Hull Form renovated tuna purse seiner, Journal of the Korean Society of Fisheries Technology, Vol. 51, No. 3, pp. 321-332. https://doi.org/10.3796/KSFT.2015.51.3.321
  4. Hong, J. K., I. K. Kang and S. J. Jung(2015b), Maneuvering Character of Hull Form Renovated Tuna Purse Seiner, Journal of the Korean Society of Fisheries Technology, Vol. 51, No. 1, pp. 61-70. https://doi.org/10.3796/KSFT.2015.51.1.061
  5. Hosseini, S. A.(2011), Dynamic Simulation of Tuna Purse Seine Gear Verified by Field Experiments, Thesis for the Degree of Doctor of Philosophy, Pukyong National University Graduate School, pp. 107-110.
  6. KATS(2013), Korean Agency for Technology and Standards, KS D-7028, Aluminium and Aluminium Alloy Welding Rods and Wires, pp. 1-13.
  7. KATS(2016), Korean Agency for Technology and Standards, KS B-0879, Recommended Practice for Inert Gas Shielded Arc Welding of Aluminium and Aluminium Alloys, pp. 1-17.
  8. Kim, H. S.(1999), Property of Fish School and Vertical Temperature Profile of Tuna Purse Seine in the Western Pacific Ocean, Journal of the Korean Society of Fisheries Technology, Vol. 35, No. 3, pp. 237-242.
  9. Kim, J. M.(2014), Tiltrotor Aircraft Issues and Recent World Trend in VTOL Aircraft Development, Journal of the Korean Society For Aeronautical and Space Sciences, Vol. 2014, No.11, pp. 1-16.
  10. Ku, H. M., B. K. Kang and D. S. Kang(2007), A Study on Designs and Construction Methods of Coastal Aluminum Fishing Vessel, Journal of the Korea Ship Safety Technology Authority, Vol. 23, pp. 51-64.
  11. Lee, J. S. and C. W. Lee(2014), The Development of Small Water Jet Propulsion for 150HP Grade Inboard Type, Journal of Korea Society of Marine Engineering, Vol. 38, No. 3, pp. 246-252. https://doi.org/10.5916/jkosme.2014.38.3.246
  12. Lee, M. K., S. I. Lee, Z. K. Kim, J. E. Ku, H. W. Park and S. C. Yoon(2015), The Fishing Characteristics of Korean Tuna Purse Seine Fishery in the Pacific Ocean, Journal of the Korean Society of Fisheries Technology Vol. 51, No. 3, pp. 414-423. https://doi.org/10.3796/KSFT.2015.51.3.414
  13. Lee, S. R., G. J. Kang and S. S. Cho(2017), Evaluation of Structural Safety of Polyethylene Boats by Drop Test Method, Journal of the Korea Academia-Industrial cooperation Society, Vol. 18, No. 5, pp. 531-542. https://doi.org/10.5762/KAIS.2017.18.5.531
  14. Mclnnes, A.(1986), Some Hull Construction Aspects of Small Patrol Boats, Lloyd's Register Technical Association, No. 3, Session, 1985-1986.
  15. MOF(2015a), Ministry of Oceans and Fisheries, 2015-123, Structure Standard of Aluminum Ship, pp. 10-47.
  16. MOF(2015b), Ministry of Oceans and Fisheries, 2015-218, Inspection Standard of Pleasure Boat, pp. 37-39.
  17. MOF(2016), Ministry of Oceans and Fisheries, Fisheries Statistics in Fisheries Information Service, http://www.fips.go.kr, accessed 27 July 2016.
  18. Moon, D. Y., J. U. Lee and J. B. Kim(1996), On the Log- Associated School Fishery of Korean tuna purse seiners, Journal of the Korean Society of Fisheries Technology, Vol. 29, No. 2, pp. 197-207.
  19. Moon, D. Y., W. S. Yang, S. S. Kim, J. R. Koh and E. J. Kim(2005), Characteristics of the Korean Tuna Purse Seine Fishery in the Western and Central Pacific Ocean, Journal of the Korean Society of Fisheries Technology, Vol. 41, No. 4, pp. 263-270. https://doi.org/10.3796/KSFT.2005.41.4.263
  20. Park, A. M.(2012), A Study on Resistance Performance of High Speed Aluminum Leisure Boat, Thesis for the Degree of Master of Engineering, Chosun University Ship the Ocean Engineering, pp. 3-8.
  21. Park, C. H., H. Y. Jang., M. S. Park and N. K. Im(2013), Result Analysis of Sea Trial Test for Offshore Fishing Boat Attached FRP Rudder, Journal of Ocean Engineering and Technology, Vol. 27, No. 6, pp. 112-118. https://doi.org/10.5574/KSOE.2013.27.6.112
  22. Park, S. W.(1984), On the Tuna Schools Associated with the Drift Objects or Animals in the Western Equatorial Pacific Waters, Journal of the Korean Society of Fisheries Technology, Vol. 17, No. 1, pp. 47-54.
  23. Park, Y. Y., Y. W. Lee and D. J. Lee(2016), Analysis on Fishing Conditions of the Korean Tuna Purse Seiner Operating in the Western and Central Pacific Ocean, Journal of the Korean Society of Fisheries Technology, Vol. 52, No. 4, pp. 356-363. https://doi.org/10.3796/KSFT.2016.52.4.356
  24. Ryu, K. J., Y. W. Lee and H. S. Kim(2015), A Change of Rigging Method for Purse Seine Gear of Korea Tuna Purse Seine Fishery in the Western and Central Pacific Ocean, Journal of the Korean Society of Fisheries Technology, Vol. 51, No. 1, pp. 50-60. https://doi.org/10.3796/KSFT.2015.51.1.050
  25. Savisky, D.(1992), Overview of Planing Hull Developments, High Performance Marine Vehicle Conference and Exhibit, American Society of Naval Engineers, pp. 1-14.