References
-
Oh SA, Kang MK, Yea JW, Kim SK, Oh YK. Study of the penumbra for high-energy photon beams with
$Gafchromic^{TM}$ EBT2 films. Journal of the Korean Physical Society. 2012;60:1973-76. https://doi.org/10.3938/jkps.60.1973 - Khan FM, Gibbons JP. Khan's the physics of radiation therapy: Lippincott Williams & Wilkins. 2014
- Ezzell GA, Burmeister JW, Dogan N, LoSasso TJ, Mechalakos JG, et al. IMRT commissioning: multiple institution planning and dosimetry comparisons, a report from AAPM Task Group 119. Medical physics. 2009;36:5359-73. https://doi.org/10.1118/1.3238104
- Yea JW, Park JW, Kim SK, Kim DY, Kim JG, et al. Feasibility of a 3D-printed anthropomorphic patient-specific head phantom for patient-specific quality assurance of intensity-modulated radiotherapy. PloS one. 2017;12: e0181560. https://doi.org/10.1371/journal.pone.0181560
- Oh SA, Kim SK, Kang MK, Yea JW, Kim EC. Dosimetric verification of enhanced dynamic wedges by a 2D ion chamber array. Journal of the Korean Physical Society. 2013;63: 2215-19. https://doi.org/10.3938/jkps.63.2215
- Oh SA, Yea JW, Lee R, Park HB, Kim SK. Dosimetric Verifications of the Output Factors in the Small Field Less Than 3 cm2 Using the Gafchromic EBT2 Films and the Various Detectors. Progress in Medical Physics. 2014;25:218-24. https://doi.org/10.14316/pmp.2014.25.4.218
- Kim SK, Kang MK, Yea JW, Oh SA. Dosimetric evaluation of a moving tumor target in intensity-modulated radiation therapy (IMRT) for lung cancer patients. Journal of the Korean Physical Society. 2013;63:67-70. https://doi.org/10.3938/jkps.63.67
- Oh SA, Kang MK, Yea JW, Kim SH, Kim KH, et al. Comparison of intensity modulated radiation therapy dose calculations with a PBC and AAA algorithms in the lung cancer. Korean J Med Phys. 2012;23:48-53.
-
Bush K, Gagne I, Zavgorodni S, Ansbacher W, Beckham W. Dosimetric validation of
$Acuros^{(R)}$ XB with Monte Carlo methods for photon dose calculations. Medical physics 2011;38:2208-21. https://doi.org/10.1118/1.3567146 - Fogliata A, Nicolini G, Clivio A, Vanetti E, Cozzi L. Critical appraisal of Acuros XB and Anisotropic Analytic Algorithm dose calculation in advanced non-small-cell lung cancer treatments. International Journal of Radiation Oncology* Biology* Physics 2012;83:1587-95. https://doi.org/10.1016/j.ijrobp.2011.10.078
- Tsuruta Y, Nakata M, Nakamura M, Matsuo Y, Higashimura K, et al. Dosimetric comparison of Acuros XB, AAA, and XVMC in stereotactic body radiotherapy for lung cancer. Medical physics. 2014;41.
- Ehler ED, Barney BM, Higgins PD, Dusenbery KE. Patient specific 3D printed phantom for IMRT quality assurance. Physics in medicine and biology. 2014;59:5763. https://doi.org/10.1088/0031-9155/59/19/5763
- Madamesila J, McGeachy P, Barajas JEV, Khan R. Characterizing 3D printing in the fabrication of variable density phantoms for quality assurance of radiotherapy. Physica Medica. 2016;32:242-7.
- Park JW, Oh SA, Yea JW, Kang MK. Fabrication of malleable three-dimensional-printed customized bolus using threedimensional scanner. PloS one. 2017;12:e0177562. https://doi.org/10.1371/journal.pone.0177562
- Park J, Yea J. Three-dimensional customized bolus for intensity-modulated radiotherapy in a patient with Kimura's disease involving the auricle. Cancer/Radiotherapie 2016;20:205-9. https://doi.org/10.1016/j.canrad.2015.11.003
Cited by
- Radiological Characteristics of Materials Used in 3-Dimensional Printing with Various Infill Densities vol.30, pp.4, 2017, https://doi.org/10.14316/pmp.2019.30.4.155
- A Systematic Review on 3D-Printed Imaging and Dosimetry Phantoms in Radiation Therapy vol.18, pp.None, 2019, https://doi.org/10.1177/1533033819870208
- Fabrication and Dosimetric Evaluations of a Dummy Eye Shield for Radiotherapy vol.75, pp.8, 2017, https://doi.org/10.3938/jkps.75.605
- Additive Manufacture of Lung Equivalent Anthropomorphic Phantoms: A Method to Control Hounsfield Number Utilizing Partial Volume Effect vol.3, pp.1, 2020, https://doi.org/10.1115/1.4044460
- Radiological characteristics of a new experimental rubber elastomeric polymer used in three-dimensional printing with different infill densities and patterns vol.4, pp.12, 2017, https://doi.org/10.1088/2399-6528/abd1c3