DOI QR코드

DOI QR Code

Insight into influence of iron addition in membrane bioreactor on gel layer fouling

  • Zhang, Haifeng (School of Chemistry Engineering, Northeast Dianli University) ;
  • Lu, Xin (School of Chemistry Engineering, Northeast Dianli University) ;
  • Yu, Haihuan (School of Chemistry Engineering, Northeast Dianli University) ;
  • Song, Lianfa (Department of Civil, Environmental and Construction Engineering, Texas Tech University)
  • 투고 : 2017.12.24
  • 심사 : 2017.04.26
  • 발행 : 2017.11.25

초록

Membrane fouling in membrane bioreactor (MBR) remains a primary challenge for its wider application. The focus of this study to investigate the influence of iron distribution in activated sludge on gel layer fouling in MBR. Significant reduction in the transmembrane pressure (TMP) rise rates was observed in the presence of iron as result of retarding the gel layer formation time. The spatial distribution of iron had a significant impact on the stratification structure of extracellular polymeric substances (EPS) fractions, such as proteins (PN) and polysaccharides (PS). A mitigation of PN or PS from the supernatant to the EPS inner layers was observed in the presence of iron. Compared with the control reactor, the reduction in PN and PS of the supernatant and lower PN/PS rates of the LB-EPS were beneficial to decrease the membrane fouling potential during the gel layer formation. Consequently, the iron addition managed to control gel layer fouling could be a useful strategy in MBR.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation of China

참고문헌

  1. Bradford, M.M. (1976), "A rapid and sensitive method for the quantization of microgram quantities of protein utilizing the principle of protein-dye binding", Anal. Biochem., 72(1-2), 248-254. https://doi.org/10.1016/0003-2697(76)90527-3
  2. Bura, R., Cheung, M. and Liao, B. (1998), "Composition of extracellular polymeric substances in the activated sludge floc matrix", Water Sci. Technol., 37(4), 325-333. https://doi.org/10.1016/S0273-1223(98)00125-5
  3. Dubois, M., Gilles, K.A., Hamilton, J.K., Rebers, P.A. and Smith, F. (1956), "Colorimetric method for determination of sugars and related substances", Anal. Chem., 28(3), 350-356. https://doi.org/10.1021/ac60111a017
  4. Gao, W.J., Lin, H.J., Leung, K.T. and Liao, B.Q. (2010), "Influence of elevated pH shocks on the performance of a submerged anaerobic membrane bioreactor", Proc. Biochem., 45(8), 1279-1287. https://doi.org/10.1016/j.procbio.2010.04.018
  5. Hong H., Peng W., Zhang M., Chen, J., He, Y., Wang, F., Wen, X., Yu, H. and Lin H. (2013), "Thermodynamic analysis of membrane fouling in a submerged membrane bioreactor and its implications", Bioresour. Technol., 146(10), 7-14. https://doi.org/10.1016/j.biortech.2013.07.040
  6. Hong, H., Zhang, M., He, Y., Chen, J. and Lin, H. (2014), "Fouling mechanisms of gel layer in a submerged membrane bioreactor", Bioresour. Technol., 166, 295-302. https://doi.org/10.1016/j.biortech.2014.05.063
  7. Ji J., Qiu J. and Wai N. (2010), "Influence of organic and inorganic flocculants on physical-chemical properties of biomass and membrane-fouling rate", Water Res., 44(5), 1627-1635. https://doi.org/10.1016/j.watres.2009.11.013
  8. Le-Clech, P., Chen, V. and Fane, T.A.G. (2006), "Fouling in membrane bioreactors used in wastewater treatment", J. Membr. Sci., 284(1-2), 17-53. https://doi.org/10.1016/j.memsci.2006.08.019
  9. Lee, W., Kang, S. and Shin, H. (2003), "Sludge characteristics and their contribution to microfiltration in submerged membrane bioreactor", J. Membr. Sci., 216(1-2), 217-227. https://doi.org/10.1016/S0376-7388(03)00073-5
  10. Li, H., Wen, Y., Cao, A., Huang, J. and Zhou, Q. (2014), "The influence of multivalent cations on the flocculation of activated sludge with different sludge retention times", Water Res., 55(2), 225-232. https://doi.org/10.1016/j.watres.2014.02.014
  11. Li, H., Wen, Y., Cao, A., Huang, J., Zhou, Q. and Somasundaran, P. (2012), "The influence of additives ($Ca^{2+}$, $Al^{3+}$, and $Fe^{3+}$) on the interaction energy and loosely bound extracellular polymeric substances (EPS) of activated sludge and their flocculation mechanisms", Bioresour. Technol., 114(2), 188-194. https://doi.org/10.1016/j.biortech.2012.03.043
  12. Li, J. (2005), "Effects of Fe(III) on floc characteristics of activated sludge", J. Chem. Technol. Biotechnol., 80(3), 313-319. https://doi.org/10.1002/jctb.1169
  13. Liang, S., Liu, C. and Song, L. (2007), "Soluble microbial products in membrane bioreactor operation: Behaviors, characteristics, and fouling potential", Water Res., 41(1), 95-101. https://doi.org/10.1016/j.watres.2006.10.008
  14. Nguyen, T.N.P., Su, Y.C., Pan, J.R. and Huang, C. (2014), "Comparison of membrane foulants occurred under different sub-critical flux conditions in a membrane bioreactor (MBR)", Bioresour. Technol., 166, 389-394. https://doi.org/10.1016/j.biortech.2014.05.073
  15. Novak, J.T., Verma, N. and Muller, C.D. (2007), "The role of iron and aluminium in digestion and odor formation", Water Sci. Technol., 56(9), 59-65. https://doi.org/10.2166/wst.2007.705
  16. Sheng, G.P., Yu, H.Q. and Li, X.Y. (2010), "Extracellular polymeric substances (EPS) of microbial aggregates in biological wastewater treatment systems: A review", Biotechnol. Adv., 28(6), 882-894. https://doi.org/10.1016/j.biotechadv.2010.08.001
  17. Sponza D.T. (2003) "Investigation of extracellular polymer substances (EPS) and physicochemical properties of different activated sludge flocs under steady-state conditions", Enzyme Microb. Technol., 32(3-4), 375-385. https://doi.org/10.1016/S0141-0229(02)00309-5
  18. Waite, T.D. (2002), "Challenges and opportunities in the use of iron in water and wastewater treatment", Rev. Environ. Sci. Bio. Technol., 1(1), 9-15. https://doi.org/10.1023/A:1015131528247
  19. Wang, Z., Wu, Z., Yin, X. and Tian, L. (2008), "Membrane fouling in a submerged membrane bioreactor (MBR) under sub-critical flux operation: membrane foulant and gel layer characterization", J. Membr. Sci., 325(1), 238-244. https://doi.org/10.1016/j.memsci.2008.07.035
  20. Wen, Y., Zhang, W., Yang, Y., Cao, A. and Zhou, Q. (2015), "Influence of $Al^{3+}$ addition on the flocculation and sedimentation of activated sludge: Comparison of single and multiple dosing patterns", Water Res., 75, 201-209. https://doi.org/10.1016/j.watres.2015.02.053
  21. Wu, J. and Huang, X. (2008), "Effect of dosing polymeric ferric sulfate on fouling characteristics, mixed liquor properties and performance in a long-term running membrane bioreactor", Sep. Purif. Technol., 63(1), 45-52. https://doi.org/10.1016/j.seppur.2008.03.033
  22. Yu, G.H., He, P.J., Shao, L.M. and He, P.P. (2008), "Stratification structure of sludge flocs with implications to dewaterability", Environ. Sci. Technol., 42(21), 7944-7949. https://doi.org/10.1021/es8016717
  23. Zhang, H., Lv., N. and Sun, B. (2014b), "Research of the activated sludge reduction under low nutrition in MBR", J. Northeast Dianli Univ., 34(6), 58-61.
  24. Zhang, H., Wang, Z., Zhang, L. and Song, L. (2014a), "Impact of sludge cation distribution pattern on its filterability in membrane bioreactor", Bioresour. Technol., 171, 16-21. https://doi.org/10.1016/j.biortech.2014.07.084
  25. Zhang, H.F., Sun, B.S., Zhao, X.H. and Gao, Z.H. (2008), "Effect of ferric chloride on fouling in membrane bioreactor", Sep. Purif. Technol., 63(2), 341-347. https://doi.org/10.1016/j.seppur.2008.05.024
  26. Zhang, Z., Bligh, M.W. and Yuan, W. (2015), "Cleaning strategies for iron-fouled membranes from submerged membrane bioreactor treatment of wastewaters", J. Membr. Sci., 475, 9-21. https://doi.org/10.1016/j.memsci.2014.09.003

피인용 문헌

  1. Effects of Loosely Bound EPS Release and Floc Reconstruction on Sludge Dewaterability vol.229, pp.2, 2017, https://doi.org/10.1007/s11270-017-3683-z