Structural Engineering and Mechanics

  • 제64권3호
  • /
  • Pages.287-292
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural fatigue modeling of short fibers/epoxy composites

  • Shokrieh, M.M. (Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology) ;
  • Haghighatkhah, A.R. (Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology) ;
  • Esmkhani, M. (Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology)
  • 투고 : 2016.05.21
  • 심사 : 2017.07.11
  • 발행 : 2017.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

In the present research, an available flexural stiffness degradation model was modified and a new comprehensive model called "X-NFSD" was developed. The X-NFSD model is capable of predicting the flexural stiffness degradation of composite specimen at different states of stresses and at room temperature. The model was verified by means of different experimental data for chopped strand mat/epoxy composites under displacement controlled bending loading condition at different displacements and states of stresses. The obtained results provided by the present model are impressively in very good agreement with the experimental data and the mean value of error of 5.4% was achieved.

키워드

참고문헌

  1. ASTM B593-96 (2003), Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials.
  2. ASTM D 790-10 (2010), Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials.
  3. Berchem, K. and Hocking, M.G. (2006), "A simple plane bending fatigue and corrosion fatigue testing machine", Measur. Sci. Technol., 17, 60-66. https://doi.org/10.1088/0957-0233/17/10/N05
  4. Caprino, G. and D'Amore, A. (1998), "Flexural fatigue behavior of random continuous-fiber reinforced thermoplastic composites", Compos. Sci. Tech., 58, 957-965. https://doi.org/10.1016/S0266-3538(97)00221-2
  5. Catangiu, A., Dumitrescu, A.T. and Ungureanu, D. (2011), "Glass-Epoxy composite materials", Mater. Mech., 6, 47-51.
  6. De Baere, I., Van Paepegem, W. and Degrieck, J. (2009), "Comparison of different setups for fatigue testing of thin composite laminates in bending", Int. J. Fatig., 31(6), 1095-1101. https://doi.org/10.1016/j.ijfatigue.2008.05.011
  7. Epaarachchi, J.A. and Clausen, P.D. (2003), "A model for fatigue behavior prediction of Glass Fibre-Reinforced Plastic (GFRP) composites for various stress ratios and test frequencies", Comp. A: Appl. Sci. Manuf., 34, 313-326. https://doi.org/10.1016/S1359-835X(03)00052-6
  8. Koricho, E.G., Belingardi, G. and Beyene, A.T. (2014), "Bending fatigue behavior of twill fabric E-glass/epoxy composite", Comput. Struct., 111, 169-178. https://doi.org/10.1016/j.compstruct.2013.12.032
  9. Mandell, J.F. (1990), Fatigue of Composite Materials, Ed. Reifsnider, K.L., Elsevier Science Publishers B.V.
  10. Mortazavian, S. and Fatemi, A. (2015), "Fatigue behavior and modeling of short fiber reinforced polymer composites: A literature review" Int. J. Fatig., 70, 297-321. https://doi.org/10.1016/j.ijfatigue.2014.10.005
  11. Naderi, M. and Khonsari, M.M. (2012), "Thermodynamic analysis of fatigue failure in a composite laminate", Mech. Mater., 46, 113-122. https://doi.org/10.1016/j.mechmat.2011.12.003
  12. Paepegem, V.M. and Degrieck, J. (2001a), "Experimental set-up for and numerical modelling of bending fatigue experiments on plain woven glass/epoxy composites", Compos. Struct., 51, 1-8. https://doi.org/10.1016/S0263-8223(00)00092-1
  13. Paepegem, V.M. and Degrieck, J. (2002), "A new coupled approach of residual stiffness and strength for fatigue of fibrereinforced composites", Int. J. Fatig., 24, 747-762. https://doi.org/10.1016/S0142-1123(01)00194-3
  14. Paepegem, V.M. and Degrieck, J. (2001b), "Fatigue degradation modelling of plain woven glass/epoxy composites", Compos. Part A, Appl. Sci. Manuf., 32, 1433-1441. https://doi.org/10.1016/S1359-835X(01)00042-2
  15. Paepegem, V.M. and Degrieck, J. (2001c), "Modelling strategies for fatigue damage behaviour of fibre-reinforced polymer composites", Eur. J. Mech. Environ. Eng., 1, 3.
  16. Rajeesh, K.R., Gnanamoorthy, R. and Velmurugan, R. (2010), "Effect of humidity on the indentation hardness and flexural fatigue behavior of polyamide 6 nanocomposite", Mater. Sci. Eng.: A, 527(12), 2826-2830. https://doi.org/10.1016/j.msea.2010.01.070
  17. Ramkumar, A. and Gnanamoorthy, R. (2010), "Effect of nanoclay addition on the displacement-controlled flexural fatigue behavior of a polymer", J. Mater. Sci., 45, 4180-4187. https://doi.org/10.1007/s10853-010-4508-2
  18. Shokrieh, M.M., Esmkhani, M. and Taheri-Behrooz, F. (2014a), "Fatigue modeling of chopped strand mat/epoxy composites", Struct. Eng. Mech., 50, 231-240. https://doi.org/10.12989/sem.2014.50.2.231
  19. Shokrieh, M.M. Esmkhani, M. and Haghighatkhah, A.R. (2014b), "Flexural fatigue behaviour of carbon nanofiber/epoxy nanocomposites", Fatig. Fract. Eng. Mater. Struct., 37(5), 553-560. https://doi.org/10.1111/ffe.12137
  20. Sidoroff, F. and Subagio, B. (1987), "Fatigue damage modelling of composite materials from bending tests", Sixth International Conference on Composite Materials (ICCM-VI) & Second European Conference on Composite Materials (ECCM-II), 4, 4-32.
  21. Tarar, W., Scott-Emuakpor, O. and Herman, S. (2010), "Development of new finite elements for fatigue life prediction in structural components", Struc. Eng. Mech., 35(6), 659-676. https://doi.org/10.12989/sem.2010.35.6.659