대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제41권11호
  • /
  • Pages.775-784
  • /
  • 2017
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

운행 가솔린자동차 엔진성능에 미치는 튜닝 흡기 및 배기 시스템의 효과에 관한 연구

A Study on Effects of Tuning Intake and Exhaust Systems upon Engine Performance in a Driving Gasoline Car

  • 배명환 (경상대학교 기계설계학과) ;
  • 구영진 (경상대학교 기계설계학과) ;
  • 박희성 (경상대학교 기계설계학과)
  • Bae, Myung-whan (Dept. of Mechanical Engineering for Production, Gyeongsang Nati'l Univ.) ;
  • Ku, Young Jin (Dept. of Mechanical Engineering for Production, Gyeongsang Nati'l Univ.) ;
  • Park, Hui-seong (Dept. of Mechanical Engineering for Production, Gyeongsang Nati'l Univ.)
  • 투고 : 2017.05.31
  • 심사 : 2017.08.29
  • 발행 : 2017.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구의 목적은 운행자동차에 있어서 안전운행과 환경에 문제가 없는 효과적인 엔진튜닝의 작업가능성을 확인하고, 튜닝엔진의 특징을 파악하여 엔진튜닝 검사의 기초자료를 분석하는 것이다. 비튜닝 및 튜닝 엔진 2-1, 2-2, 2-3의 4종류에 대한 넓은 범위의 엔진회전수 하에서 4행정, 4기통 DOHC, 터보 인터쿨러, 수냉 가솔린엔진의 실제 운행자동차를 사용하여 공연비 및 성능 특성에 미치는 튜닝엔진의 효과를 실험적으로 조사했다. 운행 가솔린자동차에 대한 엔진의 튜닝 부분은 흡기 다기관, 흡기 파이프, 공기필터, 배기 다기관, 배기 파이프 및 소음기를 포함한다. 1인이 탑승한 5단 자동변속기를 갖는 운행 가솔린자동차 비튜닝 및 튜닝 엔진의 공연비 및 토크는 차대 동력계(Dynojet 224xLC)에 의하여 실험에 의해 측정하였다. 운행 가솔린자동차 튜닝엔진의 최대 토크는 비튜닝엔진보다 평균 103.68% 만큼 증가되었고, 튜닝엔진의 최대 출력은 비튜닝엔진보다도 평균 119.68% 만큼 증가되었음을 알았다.

The purpose of this study was to analyse the basic data of the engine tuning inspection by confirming the working possibility of effective engine tuning and identifying the characteristics of tuned engine that are no problem with the safety operation and environment in a driving gasoline car. The effects of tuned engine on the characteristics of air/fuel ratio and performance at a wide range of engine speeds were experimentally investigated by the actual driving car with a four-cycle, four-cylinder DOHC, turbo-intercooler, water-cooled gasoline engine operating under four types of non-tuning, and tuning 2-1, 2-2 and 2-3. The tuned parts of engine in a driving gasoline car include the intake manifold, intake pipe, air filter, exhaust manifold, exhaust pipe and silencer. In this experiment, the air-fuel ratio and torque of both non-tuned and tuned engines that one person took on board in the car with a five-speed automatic transmission were measured by the chassis dynamometer(Dynojet 224xLC). It was found that the maximum torque of tuned engine in a driving gasoline car was increased by 103.68% on average, while the maximum output was increased by 119.68% on average in comparison to the non-tuned engine.

키워드

참고문헌

  1. Kamimoto, T. and Bae, M. W., 1988, "High Combustion Temperature for the Reduction of Particulate in Diesel Engines," SAE Paper 880423, pp. 1-10.
  2. Kamimoto, T., Bae, M. W. and Kobayashi, H., 1989, "A Study on Soot Formation in Premixed Constant Volume Propane Combustion," Combustion and Flame 75, pp. 221-228. https://doi.org/10.1016/0010-2180(89)90039-4
  3. Bae, M. W., 1989, "A Study on Soot Forma- tion in Premixed Combustion at High Pressures," Doctoral Dissertation of Tokyo Institute of Technology, pp. 1-168.
  4. Bae, M. W. and Ha, J. H., 1998, "A Study on the Characteristics of Exhaust Emissions in Diesel Engines with Scrubber EGR System," Journal of the Korean Society of Marine Engineers, Vol. 22, No. 6, pp. 481-489.
  5. Bae, M. W. and Syaiful, 2009, "Numerical Simulation on Effect of Heating Temperature upon the Gaseous Flow in a SCR Catalytic Filter Device," SAE Technical Paper 2009-01-2628, pp. 1-8.
  6. Riyandwita, B. W. and Bae, M. W., 2010, "Effects of Gas Transport Properties on the Processes of $NO_x$ Reduction and $NH_3$ Oxidation in a Urea-SCR System Using Numerical Analyses," SAE Technical Paper 2010-01-2093, pp. 1-11.
  7. Riyandwita, B. W. and Bae, M. W., 2011, "Three-Dimensional Simulation with Porous Medium as the Washcoat Layer for an SCR Monolith Reactor," SAE Technical Paper 2011-01 -1240, pp. 1-11.
  8. Riyandwita, B. W., Bae, M. W., Tanjung, E. F. and Tsuchiya, K., 2011, "Evaluation of Gas Transport Properties on the Process of Urea Gas Decomposition in the Modeling of a Urea-SCR System," SAE Technical Paper 2011-28-0044, pp. 1-6.
  9. Bae, M. W., 2014, "A Study on Characteristics of an Integrated Urea-SCR Catalytic Filter System for Simultaneous Reduction of Soot and NOX Emissions in ECU Common-rail Diesel Engines," Transactions of the KSAE, Vol. 22, No. 4, pp. 111-120. https://doi.org/10.7467/KSAE.2014.22.4.111
  10. Bae, M. W., Jung, K. H. and Park, S B., 2016, "A Study on Effect of Recirculated Exhaust Gas upon Performance and Exhaust Emissions in a Power Plant Boiler with FGR System," Transactions of the KSME, Vol. 40, No. 4, pp. 263-273.
  11. Bae, M. W., Ku, Y. J. and Park, H. S., 2016, "A Study on Tuning Effects of Intake Manifold, Intake Pipe and Air Filter upon Performance and Exhaust Emissions of Driving Car," Transactions of the KSAE, Vol. 24, No. 5, pp. 538-548. https://doi.org/10.7467/KSAE.2016.24.5.538
  12. Kim, B. H. and Lee, S. Y., 2008, "Engine ECU Mapping Technology Training for Automotive Tuning," Proceedings of 2008 KSAE 30th Anniversary Conference, KSAE08-S0238, pp. 1444-1447.