References
- K. Ding and L. Ye, "Laser Shock Peening Performance and Process Simulation," CRC Press, pp. 47-118, 2006.
- K. Ding, and L. Ye, "Simulation of Multiple Laser Shock Peening of a 35CD4 Steel Alloy," J. of Materials Processing Technology, Vol. 178, pp. 162-169, 2006. https://doi.org/10.1016/j.jmatprotec.2006.03.170
- J. E. Masse and G. Barreau, "Laser Generation of Stress Waves in Metal," Surface and Coating Technology, Vol. 70, pp. 231-234, 1995. https://doi.org/10.1016/0257-8972(95)80020-4
- LSP Technologies, Inc., "http://www.lsptechnologies.com/tag/f110-engine/," Laser Processing Services and Equipment Design, 2014
- J. D, Kim, M. KUTSUNA and Y. SANO, “Laser Peening Process and Its Application Technique,” Journal of Welding and Joining, Vol. 33, No. 4, pp. 1-6, 2015. https://doi.org/10.5781/JWJ.2015.33.4.1
- A. Lloyd, "Hacke l : Proc. of SAIL," June 2-4, Williamsburg, US, Paper #sec6-05, 2003.
- ABAQUS Version 6.13, User's Manual, Dassault Systemes, 2008.
- X. Ling, W. Peng, and G. Ma, “Influence of Laser Peening Parameters on Residual Stress Field of 304 Stainless Steel,” J. of Pressure Vessel Technology, Vol. 130, No. 021120, pp. 1-8, 2008.
- B. W. Bang, S. K. Son, J. M. Kim and C. D. Cho, "Residual Stress Prediction in LSP Surface Treatment by Using FEM," KSME-A, Vol. 33, No. 8, pp. 776-772, 2009.
- W. Braisted and R. Brockman, "Finite Element Simulation of Laser Shock Peening," Int. J. of Fatigue, Vol. 21, pp. 719-724, 1999. https://doi.org/10.1016/S0142-1123(99)00035-3
- P. Peyre and R. Fabbro, "Laser Shock Processing: A Review of the Physics and Applications," Optical and Quantum Electronics, Vol. 27, pp. 1213-1229, 1995.
- P. Peyre, R. Fabbro, P. Merrien and H. P. Lieurade, "Laser Shock Processing of Aluminium Alloys, Application to High Cycle Fatigue Behaviour," Mater. Sci. Eng., A 210, pp. 102-113, 1996.
- C. Yang, P. D. Hodgso, Q. Liu and L. Ye, "Geometrical Effects on Residual Stresses in 7050-T7451 Aluminum Alloy Rods Subject to Laser Shock Peening," J. of Material Processing Technology, Vol. 201, pp. 303-309, 2008. https://doi.org/10.1016/j.jmatprotec.2007.11.147
- R. Fabbro, J. Fournier, P. Ballard and D. Devaux, “Physical Study of Laser Produced Plasma in Confined Geometry,” Journal of Applied Physics, Vol. 68, No. 2, pp. 775-784, 1999. https://doi.org/10.1063/1.346783
- Y. Hu, Z. Yao and J. Hu, "3-D FEM Simulation of Laser Shock Processing," Surface & Coating Technology, Vol. 201, pp. 1426-1435, 2006. https://doi.org/10.1016/j.surfcoat.2006.02.018
- P. Ballard, J. Fournier, R. Fabbro and J. Frelat, "Residual Stresses Induced by Laser-Shocks," J. de Physique IV, Vol. 1, pp. 487-581, 1991.
- J. H. Kim, Y. J. Kim, J. S. Kim, "Effects of Simulation Parameters on Residual Stresses for Laser Shock Peening Finite Element Analysis," J. of Mechanical Science and Technology, Vol. 27, pp. 2025-2034, 2013. https://doi.org/10.1007/s12206-012-1263-0
- K. Ogawa, D. Deng, S. Kiyoshima, N. Yanagida and K. Saito, "Influences of Heat Source Model on Welding Residual Stress and Distortion in a Multi-Pass J-Groove Joint," J. of Computation Materials Science, Vol. 46, pp. 987-995, 2009. https://doi.org/10.1016/j.commatsci.2009.05.002
- D. Rudland, Y. Chen, T. Zhang, G. Wilkowski, J. Broussard and G. White, "Comparison of Welding Residual Stress Solutions for Control Rod Drive Mechanism Nozzles," ASME PVP, 2007-26045, pp. 1-15, 2007.
- S. Wu, C. Huang, X. Wang and H. Song, "A New Effective Method to Estimate the Effect of Laser Shock Peening," Int. J. of Impact Engineering, Vol. 38, pp. 322-329, 2011. https://doi.org/10.1016/j.ijimpeng.2010.11.008