References
- D. Luo, H. Wang, Z. Yang, L. Chen, J. Wang, Q. Jiang, Microstructure and mechanical properties of Mg-5Sn alloy fabricated by a centrifugal casting method, Mater. Letters, 16 (2014) 108-111.
- Y. C. Suh, J. W. Park, S. H. Kim, Development of cast rolls by horizontal spin casting method, J. Kor. Soc. Tech. Plast. 1 (2009) 111-114.
- Y. Choi, Status of domestic turbocharger technology, J. Kor. Soc. Auto. Eng. 35 (2013) 57-62. https://doi.org/10.4491/KSEE.2013.35.1.057
- W. Wang, J. Song, Y. Yu, M. Ouyang, D. Ye, Z. Zhuang, PIM advanced materials & applications 1: Metal injection moulding of heat and wear resistant alloy DIN1.4091, European PM conference proceedings (2015).
-
Z. G. Zhang, F. Gesmundo, P.Y. Hou, Y. Niu, Criteria for the formation of protective
$Al_2O_3$ scales on Fe-Al and Fe-Cr-Al alloys, Corros. Sci. 48 (2006) 741-765. https://doi.org/10.1016/j.corsci.2005.01.012 -
D. B. Lee, A. Muhammad, Y. Pooman, S. H. Bak, S. Yuke, M. J. Kim, Corrosion of Fe-9%Cr-1%Mo Steel at 600 and
$700^{\circ}C$ in$N_2$ /(0.5, 2.5)%$H_2S$ -mixed Gas, J. Korean Inst. Surf. Eng., 49 (2016) 147-151. https://doi.org/10.5695/JKISE.2016.49.2.147 - N. Birks, G. H. Meier, F. S. Pettit, Introduction to the high temperature oxidation of metals, 2nd ed., Cambridge University Press, UK (2006) 145.
- D. J. Young, High temperature oxidation and corrosion of metals, Elsevier, UK (2008) 342.
- D. B. Lee, Y. Poonam, Oxidation of high Mn TWIP steels in reheating furnace conditions, J. Kor. Met. Mater. 53 (2015) 859-866. https://doi.org/10.3365/KJMM.2015.53.12.859
-
S. H. Bak, D. B. Lee, S. P. Baek, Effect of alloying elements Si, S, Cu, Sn, and Ni on oxidation of low carbon steels between 1050 and
$1180^{\circ}C$ in Air, J. Kor. Met. Mater. 48 (2010) 749-756. -
D. B. Lee, Effect of alloying elements of Si, Mn, Ni, and Cr on oxidation of steels between 1050 and
$1200^{\circ}C$ in Air, J. Kor. Met. Mater. 50 (2014) 300-309. - D. B. Lee, Effect of Si on High-temperature oxidation of steels during reheating and hot rolling, J. Kor. Met. Mater. 52 (2014) 899-908. https://doi.org/10.3365/KJMM.2014.52.11.899
- J. B. Yoon, S. I. Kim, I. B. Kim, Effects of carbon and sulfur content on mechanical properties of high purity steel, J. Kor. Met. Mater. 47 (2009) 331-337.