Advances in Computational Design

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A new approach to working coil design for a high frequency full bridge series resonant inverter fitted contactless induction heater

  • Dhar, Sujit (Department of Electrical and Electronics Engineering, Neotia Institute of Technology Management and Science) ;
  • Dutta, Biswajit (Department of Electrical Engineering, Seacom Engineering College) ;
  • Ghoshroy, Debasmita (Department of Electronics Engineering, Banasthali University) ;
  • Roy, Debabrata (Department of Electrical Engineering, Techno India-Batanagar) ;
  • Sadhu, Pradip Kumar (Department of Electrical Engineering, Indian Institute of Technology (Indian School of Mines)) ;
  • Ganguly, Ankur (Department of Electrical Engineering, Techno India-Batanagar) ;
  • Sanyal, Amar Nath (Department of Electrical Engineering, Jadavpur University) ;
  • Das, Soumya (Department of Electrical Engineering, University Institute of Technology)
  • Received : 2017.05.08
  • Accepted : 2017.09.02
  • Published : 2017.10.25
⟨ Previous Next ⟩

Abstract

High frequency full bridge series resonant inverters have become increasingly popular among power supply designers. One of the most important parameter for a High Frequency Full Bridge Series Resonant Inverter is optimal coil design. The optimal coil designing procedure is not a easy task. This paper deals with the New Approach to Optimal Design Procedure for a Real-time High Frequency Full Bridge Series Resonant Inverter in Induction Heating Equipment devices. A new design to experimental modelling of the physical properties and a practical power input simulation process for the non-sinusoidal input waveform is accepted. The design sensitivity analysis with Levenberg-Marquardt technique is used for the optimal design process. The proposed technique is applied to an Induction Heating Equipment devices model and the result is verified by real-time experiment. The main advantages of this design technique is to achieve more accurate temperature control with a huge amount of power saving.

Keywords

References

  1. Althaher, S., Mancarella, P. and Mutale, J. (2015), "Automated demand response from home energy management system under dynamic pricing and power and comfort constraints", IEEE Trans. Smart Grid., 6(4), 1874-1883. https://doi.org/10.1109/TSG.2014.2388357
  2. Arteconi, A., Hewitt, N.J. and Polonara, F. (2013), "Domestic demand-side management (DSM): Role of heat pumps and thermal energy storage (TES) systems", Appl. Therm. Energy, 51(1), 155-165. https://doi.org/10.1016/j.applthermaleng.2012.09.023
  3. Chakravorty, D., Chaudhuri, B. and Hui, S.Y.R. (2016), "Rapid frequency response from smart loads in Great Britain power system", IEEE Trans. Smart Grid., PP(99), 1.
  4. Dev, S.R.S., Gariepy, Y., Orsat, V. and Raghavan, G.S.V. (2012), "Finite element modeling for optimization of microwave heating of in-shell eggs and experimental validation", J. Numer. Modell. Electron. Netw., Dev. Field., 25(3), 275-287. https://doi.org/10.1002/jnm.831
  5. Feng, F. (2016), "3D finite element analysis of the whole-building behavior of tall building in fire", Adv. Comput. Des., 1(4), 329-344. https://doi.org/10.12989/ACD.2016.1.4.329
  6. Gottmann, A., Bailly, D., Bergweiler, G., Bambach, M., Stollenwerk, J. and Hirt, G. (2013), "A novel approach for temperature control in SPIF supported by laser and resistance heating", J. Adv. Manuf. Technol., 67(9), 2195-2205. https://doi.org/10.1007/s00170-012-4640-z
  7. Kantar, E. and Hava, A.M. (2016), "Optimal design of grid-connected voltage-source converters considering cost and operating factors", IEEE Trans. Ind. Electron., 63(9), 5336-5347. https://doi.org/10.1109/TIE.2016.2573759
  8. Karmaker, H., Ho, M. and Kulkarni, D. (2015), ''Comparison between different design topologies for multimegawatt direct drive wind generators using improved second generation high temperature superconductors", IEEE Trans. Appl. Supercond., 25(3), 1-5.
  9. McKenna, K. and Keane, A. (2015), "Residential load modeling of price-based demand response for network impact studies", IEEE Trans. Smart Grid., 7(5), 1-10.
  10. Naar, R. and Bay, F. (2013), "Numerical optimization for induction heat treatment processes", Appl. Math. Model., 37(4), 2074-2085. https://doi.org/10.1016/j.apm.2012.04.058
  11. Panigrahi, S.K. and Das, K. (2016), "Ballistic impact analyses of triangular corrugated plates filled with foam core", Adv. Comput. Des., 1(2), 139-154. https://doi.org/10.12989/ACD.2016.1.2.139
  12. Pitchai, K., Birla, S.L., Jones, D. and Subbiah, J. (2012), "Assessment of heating rate and non-uniform heating in domestic microwave ovens", J. Microw. Pow. Electromagn. Energy, 46(4), 229-240. https://doi.org/10.1080/08327823.2012.11689839
  13. Pitchai, K., Chen, J., Birla, S., Jones, D. and Subbiah, J. (2016), "Modeling microwave heating of frozen mashed potato in a domestic oven incorporating electromagnetic frequency spectrum", J. Food Eng., 173(1), 124-131. https://doi.org/10.1016/j.jfoodeng.2015.11.002
  14. Richardson, I., Thomson, M., Infield, D. and Clifford, C. (2010), "Domestic electricity use: A highresolution energy demand model", Energy Build., 42(10), 1878-1887. https://doi.org/10.1016/j.enbuild.2010.05.023
  15. Schweizer, M. and Kolar, J.W. (2013), "Design and implementation of a highly efficient three-level T-type converter for low-voltage applications", IEEE Trans. Pow. Electron., 28(2), 899-907. https://doi.org/10.1109/TPEL.2012.2203151
  16. Schweizer, M., Friedli, T. and Kolar, J. (2013), "Comparative evaluation of advanced three-phase three-level inverter/converter topologies against two-level systems", IEEE Trans. Ind. Electron., 60(12), 5515-5527. https://doi.org/10.1109/TIE.2012.2233698
  17. Shin, D., Lee, J.P., Yoo, D.W. and Kim, H.J. (2015), "Stability improvement of interleaved voltage source inverters employing coupled inductors for grid-connected applications", IEEE Trans. Ind. Electron., 62(10), 6014-6023. https://doi.org/10.1109/TIE.2015.2420044
  18. Wang, Z., Shi, X., Tolbert, L. and Wang, F. (2016), "Temperature-dependent short-circuit capability of silicon carbide power MOSFETs", IEEE Trans. Pow. Electron., 31(2), 1555-1566. https://doi.org/10.1109/TPEL.2015.2416358
  19. Wang, Z., Shi, X., Xue, Y., Tolbert, L., Wang, F. and Blalock, B. (2014), "Design and performance evaluation of overcurrent protection schemes for silicon carbide power MOSFETs", IEEE Trans. Ind. Electron., 61(10), 5570-5581. https://doi.org/10.1109/TIE.2013.2297304
  20. Xu, Y. and Milanovic, J.V. (2015), "Artificial-intelligence-based methodology for load disaggregation at bulk supply point", IEEE Trans. Pow. Syst., 30(2), 795-803. https://doi.org/10.1109/TPWRS.2014.2337872