대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

강섬유 혼입율에 따른 순환굵은골재 사용 SFRC 보의 휨 성능

Flexural Capacity of SRFC Beams with Recycled Coarse Aggregates according to Steel Fiber Volume Fraction

  • 이현호 (동양대학교 건축소방행정학과)
  • Lee, Hyun-Ho (Department of Architecture & Fire Service Administration, Dongyang University)
  • 투고 : 2017.07.05
  • 심사 : 2017.08.29
  • 발행 : 2017.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, performance evaluation of recycled coarse aggregate and steel fiber reinforced concrete was carried out in an effort to reduce the environmental load. A 30% of natural coarse aggregate was replaced with recycled coarse aggregate, and the volume fraction of steel fiber was used as a variable. As a result of evaluating the material strength and flexural strength, the strengthening effect of steel fiber was confirmed. In order to evaluate the applicability of recycled coarse aggregate, it was evaluated that there was no difference in the strength from the comparison using the natural coarse aggregate of the same condition. Also, the proposed formula considering the steel fiber strengthening factor was evaluated to be able to predict the flexural strength of SFRC beams.

키워드

과제정보

연구 과제 주관 기관 : 한국연구재단

참고문헌

  1. American Concrete Institute (2005). Design considerations for steel fiber reinforced concrete, ACI 544.4R-88, ACI Manual of Concrete Practice, Detroit.
  2. Ha, G.J., Yi, D.R., & Kim, J.B. (2016). Evaluation of Structural Performance of RC Beams Retrofitted Steel Fiber to the Change of Replacement Ratio of Recycled Fine Aggregates, Proceeding of the Architectural Institute of Korea, 36(2), 1493-1498.
  3. Ha, G.J., Yi, D.R., & Ha, J.H. (2013). Evaluation of Structural Performance of RC Beams Retrofitted Steel Fiber Consequential Replacement of Recycled Coarse Aggregate and Ground Granulated Blast Furnace Slag, Journal of the Korea Concrete Institute, 25(5), 477-484. https://doi.org/10.4334/JKCI.2013.25.5.477
  4. Jang, S.J., Ahn, K.L., & Yoon, H.D. (2015). Effect of Aggregate Size and Fiber Volume Fraction of Flexural Properties of Steel Fiber Reinforced Concrete (SFRC), Journal of the Architectural Institute of Korea Structure & Construction, 31(2), 45-54. https://doi.org/10.5659/JAIK_SC.2015.31.2.45
  5. Kang, S.T., Park, J.J., Koh, G.T., & Kim, S.W. (2008). Evaluation on Flexural Capacity of Reinforced Concrete Beams with Ultra High Performance Cementitious Composites, Journal of the Korea Institute for Structural Maintenance Inspection, 12(5), 81-90
  6. Kim, W.S., Baik, S.M., Lee, J.S., Kwon, J.H., & Kwak, Y.K. (2002). Flexural Capacities of Steel Fiber Reinforced Concrete Beams, Journal of the Architectural Institute of Korea, Structure & Construction Section, 18(9), 3-11.
  7. Kim, W.S., Kwak, Y.K., & Kwak, Y.K. (2006). Prediction of Flexural Capacities of Steel-Fiber Reinforced Concrete, Journal of the Korea Concrete Institute, 18(3), 361-370. https://doi.org/10.4334/JKCI.2006.18.3.361
  8. Kim, Y.I. (2016). The Effects of Steel-Fiber Reinforcement on High Strength Concrete Replaced with Recycled Coarse Aggregates More Than 60%, Journal of the Korean Recycled Construction Resources Institute, 4(4), 404-417. https://doi.org/10.14190/JRCR.2016.4.4.404
  9. Lee, H.H. (2017). Capacity Evaluation of SFRC Beams using Recycled Fine and Coarse Aggregates, Journal of the Korea Institute for Structural Maintenance Inspection, 21(2), 122-129.
  10. Lee, H.H. (2015). Flexural Behavior Evaluation of SFRC Beams Considering Steel Fiber Strengthening Factor, Journal of the Construction and Environment Research Institute, 10(1), 72-79.
  11. Lee, H.H., & Hur, M.W. (2005). Shear Capacity Estimation of SFRC Members Considering Steel Fiber Strengthening Factor and Shear Reinforcement, Journal of the Architectural Institute of Korea, Structure & Construction Section, 21(5), 35-42.
  12. Lee, H.H., & Lee, T.W. (2016). Experimental Study on Mechanical Properties and Deformation Behavior of Concrete with Recycled Aggregates and Steel Fiber, Journal of the Korea Concrete Institute, 28(3), 357-363. https://doi.org/10.4334/JKCI.2016.28.3.357
  13. Oh, Y.H., & Kim, J.H. (2008). Estimation of Flexural and Shear Strength for Steel Fiber Reinforced Flexural Members without Shear Reinforcements, Journal of the Korea Concrete Institute, 20(2), 257-267. https://doi.org/10.4334/JKCI.2008.20.2.257
  14. Sherif, Y., Kareemi, H., Anaam, A., Amani, Z., & Hiba, I. (2015). Strength and Durability Evaluation of Recycled Aggregate Concrete, Internal Journal of Concrete Structures and Materials, 9(2), 219-239. https://doi.org/10.1007/s40069-015-0100-0
  15. Shin, J,L., Kim, W.S., Baek, S.M., Kang, T.H.-K., & Kwak, Y.K. (2015). Structural Performance Evaluation of Steel Fiber-Reinforced Concrete Beams with Recycled Coarse Aggregates, Journal of the Korea Concrete Institute, 27(3), 215-227. https://doi.org/10.4334/JKCI.2015.27.3.215
  16. Shin, S.W., Oh, J.K., & Ghosh, S.K. (1994). Shear Behavior of Laboratory-Sized High-Strength Concrete Beams Reinforced with Bars and Steel Fibers, Fiber Reinforced Concrete Development and Innovations, ACI SP-142, 181-200.
  17. Yang, I.H., & Joh, C.B. (2010). Prediction of Flexural Capacity of Steel Fiber-Reinforced Ultra High Strength Concrete Beams, Journal of the Korea Society of Civil Engineers, 30(3A), 317-328.