DOI QR코드

DOI QR Code

Structural response of rectangular composite columns under vertical and lateral loads

  • Sevim, Baris (Yildiz Technical University, Department of Civil Engineering)
  • 투고 : 2017.01.10
  • 심사 : 2017.07.03
  • 발행 : 2017.10.30

초록

The present study aims to determine the structural response of full scaled rectangular columns under both of vertical and lateral loads using numerical methods. In the study, the composite columns considering full concrete filled circular steel tube (FCFRST) and concrete filled double-skin rectangular steel tube (CFDSRST) section types are numerically modelled using ANSYS software. Vertical and lateral loads are applied to models to assess the structural response of the composite elements. Also similar investigations are done for reinforced concrete rectangular (RCR) columns to compare the results with those of composite elements. The analyses of the systems are statically performed for both linear and nonlinear materials. In linear static analyses, both of vertical and lateral loads are applied to models as only one step. However in nonlinear analyses, while vertical loads are applied to model as only one step, lateral loads are applied to systems as step by step. The displacement and stress changes in some critical nodes and sections and contour diagrams are reported by graphs and figures. At the end of the study, it is demonstrated that the nonlinear models reveal more accurate result then those of linear models. Also, it is highlighted that composite columns provide more and more safety, ductility compared to reinforced concrete column.

키워드

참고문헌

  1. Ajel, H.A. and Abbas, A.M. (2016), "Experimental and analytical investigations of composite stub columns", Int. J. Innovative Res. Sci. Eng Tech., 4(2), 185-200.
  2. Alnahhal, W. and Aref, A. (2008), "Structural performance of hybrid fiber reinforced polymer-concrete bridge superstructure systems", Compos. Struct., 84(4), 319-336. https://doi.org/10.1016/j.compstruct.2007.09.002
  3. ANSYS 2016, Swanson Analysis System, USA.
  4. Aslani, F., Uy, B., Wang, Z. and Patel, V. (2016), "Confinement models for high strength short square and rectangular concretefilled steel tubular columns", Steel Compos. Struct., 22(5), 937-974. https://doi.org/10.12989/scs.2016.22.5.937
  5. Bouazaoui, L., Perrenot, G., Delmas, Y. and Li, A. (2007), "Experimental study of bonded steel concrete composite structures", J. Constr. Steel. Res., 63(9), 1268-1278. https://doi.org/10.1016/j.jcsr.2006.11.002
  6. Chacon, R. (2015), "Circular concrete-filled tubular columns: state of the art oriented to the vulnerability assessment", Open Civ. Eng. J., 9, 249-259.
  7. Chen, Z., Lei, J. and Zheng, Z. (2008), Research on CCRST columns used in seismic regions", Proceedings of the 14 th World Conference on Earthquake Engineering, Beijing, China, October.
  8. Essopjee, Y. and Dundu, Y.M. (2015), "Performance of concretefilled double-skin circular tubes in compression", Compos. Struct., 133, 1276-1283. https://doi.org/10.1016/j.compstruct.2015.08.033
  9. Eurocode 4, EN 1994-1-1 (2004), Design of Composite Steel And Concrete Structures, European Committee For Standardization, Brussel, Belgium.
  10. Fakharifar, M., Chen, G., Lin, Z. and Woolsey, Z.T. (2014), "Behavior and strength of passively confined concrete filled tubes", Proceedings of the 10th National Conference in Earthquake Engineering, Earthquake Engineering, Research Institute, Anchorage.
  11. Furlong, R. (1997), "Steel-concrete composite columns", Transportation Research Record: Journal of the Transportation Research Board, 1594, 57-63. https://doi.org/10.3141/1594-06
  12. Guo, W.X., Ruofei, H.Q.Z., Xinyu, Z. and Qun, Y. (2014), "Structural behaviors of sustainable hybrid columns under compression and flexure", Struct. Eng. Mech., 52(5), 857-873. https://doi.org/10.12989/sem.2014.52.5.857
  13. Ha, S.K., Na, S. and Lee, H.K. (2013), "Bond characteristics of sprayed frp composites bonded to concrete substrate considering various concrete surface conditions", Compos. Struct., 100, 270-279. https://doi.org/10.1016/j.compstruct.2012.12.031
  14. Hajjar, J.F. (2002), "Composite steel and concrete structural systems for seismic engineering", J. Constr. Steel. Res., 58(5-8), 703-723. https://doi.org/10.1016/S0143-974X(01)00093-1
  15. Huang, Z., Jiang, L.Z., Zhou, WB. and Chen, S. (2016), "Studies on restoring force model of concrete filled steel tubular laced column to composite box-beam connections", Steel Compos. Struct., 22(6), 1217-1238. https://doi.org/10.12989/scs.2016.22.6.1217
  16. Jacobs, W.P. and Hajjar, J.F. (2010), "Load transfer in composite construction", 2010 Structures Congress, Orlando, May.
  17. Kachlakev, D. and Miller. T (2001), "Finite element modelling of concrete structures strengthened with FRP laminates", Final Report, SPR316, Oregon Department of Transportation Research Group, Salem.
  18. Karimi, K., Tait, M.J. and El-Dakhakhni, W.W. (2011), "Testing and modeling of a novel FRP-encased steel-concrete composite column", Compos. Struct., 93(5), 1463-1473. https://doi.org/10.1016/j.compstruct.2010.11.017
  19. Kisala, D. (2016), "A finite element analysis of steel plate- concrete composite beams including the influence of stiffness of the connectors on deflection", Technical Transactions, Civil Engineering, DOI: 10.4467/2353737XCT.16.159.5770, 69-80.
  20. Li, J. and Hadi, M.N.S. (2003), "Behaviour of externally confined high-strength concrete columns under eccentric loading", Compos. Struct., 6, 145-153.
  21. Liu, J. (2013). "Neural networks method applied to the property study of steel-concrete composite columns under axial compression", Int. J. Smart Sens. Intel. Syst., 6(2), 548-566.
  22. Oyawa, W.O., Gathimba, N.K. and Mang'uriu, G.N. (2016), "Structural response of composite concrete filled plastic tubes in compression", Steel Compos. Struct., 21(3), 589-604. https://doi.org/10.12989/scs.2016.21.3.589
  23. Patel, V. and Lande, P.S. (2016), "Analytical behavior of concrete filled steel tubular columns under axial compression", Int. J. Eng. Res., 5(3), 629-632.
  24. Patidar, A.K. (2012), "Behaviour of concrete filled rectangular steel tube column". IOSR J. Mech. Civ. Eng., 4(2), 46-52. https://doi.org/10.9790/1684-0424652
  25. Pecce, M. and Ceroni, F. (2010), "Bond tests of partially encased composite columns", Adv. Steel Constr., 6(4), 1001-1018.
  26. Pereira, M.F., Nardin, S.D. and Debs, A.L.H.C. (2016), "Structural behavior of partially encased composite columns under axial loads", Steel Compos. Struct., 20(6), 1305-1322. https://doi.org/10.12989/scs.2016.20.6.1305
  27. Remennikov, A.M. and Kong, S.Y. (2012), "Numerical simulation and validation of impact response of axially-restrained steelconcrete-steel sandwich panels", Compos. Struct., 94(12), 3546-3555. https://doi.org/10.1016/j.compstruct.2012.05.011
  28. Robinson, M.J. and Melby, I.H. (2015), "Effects of bonding in short-span rectangular concrete filled GFRP tubes", Compos. Struct., 133, 131-139. https://doi.org/10.1016/j.compstruct.2015.07.105
  29. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (20049, "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng., 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  30. Schneider, S.P. (1998), "Axially loaded concrete-filled steel tubes", J. Struct. Eng., 124(10), 1125-1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125)
  31. Uenaka, K., Kitoh, H. and Sonoda, K. (2010), "Concrete filled double skin circular stub columns under compression", Thin Wall. Struct., 48(1), 19-24. https://doi.org/10.1016/j.tws.2009.08.001
  32. Wei, S., Mau, S.T., Vipulanandan, C. and Mantrala, S.K. (1995), "Performance of newsandwich tube under axial loading: experiment", J. Struct. Eng., 121(12), 1806-1814. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1806)
  33. Wu, X.G., Zou, R., Zhao, X. and Yu, Q. (2015), "Theoretical study of UHPCC composite column behaviors under axial compression", Struct.Eng. Mech., 55(5), 931-951. https://doi.org/10.12989/sem.2015.55.5.931
  34. Zhao, H. (2016), "Analysis of seismic behavior of composite frame structures", Steel Compos. Struct., 20(3), 719-729. https://doi.org/10.12989/scs.2016.20.3.719

피인용 문헌

  1. Cyclic Testing of Bolt-Weld Joints Reinforced by Sleeves Connecting Circular CFST Columns to Steel Beams vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/9674128
  2. Yield strength estimation of X65 and X70 steel pipe with relatively low t/D ratio vol.38, pp.2, 2017, https://doi.org/10.12989/scs.2021.38.2.151