한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제21권1호
  • /
  • Pages.134-141
  • /
  • 2017
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

PVA 섬유보강 황토 콘크리트에 대한 GFRP 보강근의 부착성능에 관한 실험적 연구

An Experimental Study on the Bond Characteristic of GFRP Bars in PVA Fiber Reinforced Activated Hwangtoh Concrete

  • 박미래 (한밭대학교 건축공학과) ;
  • 김승훈 (한밭대학교 건축공학과)
  • 투고 : 2016.12.12
  • 심사 : 2016.12.13
  • 발행 : 2017.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

시멘트 생산 과정에서 생성되는 이산화탄소 배출량을 감소시키기 위하여 시멘트를 대체할 수 있는 건축 재료 개발에 많은 연구가 진행되어왔다. 시멘트 대체재로 사용될 수 있는 활성 황토는 $850^{\circ}C$에서 소성 과정을 거쳐 제작된다. Poly-Vinyl Alcohol(PVA) 섬유와 GFRP 보강근은 활성 황토 콘크리트의 균열 문제를 해결하기 위하여 사용된다. 본 논문은 PVA 섬유 보강 활성 황토 콘크리트에 대하여 인발 하중에 따른 GFRP 보강근의 부착 성능을 평가하기 위한 실험 연구를 나타내고 있다. 실험 결과, 황토가 치환된 PVA 보강 및 무보강 실험체들의 평균 부착 응력 계수가 2.27~2.48로 나타났으며, 부착 응력 계수가 PVA 섬유 보강 유무 및 황토 치환율에 크게 영향을 받지 않는 것으로 나타났다. 그리고 부착 길이가 길어질수록 부착 강도는 저하되었다.

Many studies have been conducted with respect to the materials to replace the cement in order to reduce the carbon dioxide emissions during the cement production. Activated hwangtoh as cement replacement material goes through calcination process of $850^{\circ}C$. PVA fibers and GFRP bars are used in order to compensate for the cracks of activated hwangtoh concrete(AHC). This paper presents an experimental study investigating the bond characteristic of GFRP bars in PVA fiber reinforced AHC under tensile loads. Experimental results showed that average bond strength factor of specimens with and without PVA fiber was 2.27~2.48 and was not significantly affected by the ratio of PVA fiber andactivated hwangtoh. In addition, as the bond length was increased, the bond strength was reduced.

키워드

참고문헌

  1. ACI Committee 440. (2015), Guide for the Design and Constuction of Structural Concrete Reinforced with Fiber-reinforced Polymer (frp) Bars (ACI 440.1R-15), Ameican Concrete Institute, Farmington Hills, Michigan, 28.
  2. Chakchouk, A., Trifi, L., Samet, B., and Bouaziz, S. (2009). Formulation of Blended Cement: Effect of Process Variables on Clay Pozzolanic Activity. Construction and Building Materials, 23(3), 1365-1373. https://doi.org/10.1016/j.conbuildmat.2008.07.015
  3. Choi, B. W., Lee, J. M., Jung, Y. W., Oh, D. S., and Jo, Y. J. (2013), Application of Concrete and Manufacture of Lightweight Aggregate using Dyestuff Sludge, Proceeding of KSCE, KSCE, 2976-2979.
  4. Choi, H. Y., Kim, M. H., Kim, M. H., Hwang, H. Z., and Choi, S. W. (2001), Experimental Study on the Properties of Concrete by the Kinds of Admixture and the Replacement Ratios of Activated Hwangtoh, Journal of the Korea Concrete Institute, KCI, 13(2), 123-129. https://doi.org/10.22636/JKCI.2001.13.2.123
  5. El-Gamal, S. E., Al-Nuaimi, A., Al-Saidy, A., and Al-Lawati, A. (2016). Efficiency of Near Surface Mounted Technique using Fiber Reinforced Polymers for the Flexural Strengthening of RC Beams. Construction and Building Materials, 118, 52-62. https://doi.org/10.1016/j.conbuildmat.2016.04.152
  6. Hong, G. H., and Seo, M. C. (2010), Bond Performance Evaluation of the Eco-friendly Concrete Mixed with Hwang-toh and Blast Furnace Slag, Journal of the Architectural institute of korea structure & construction, AIK, 26(3), 19-26.
  7. Jang, B. J., Kim, S. W., Ju, M. K., Park, C. W., Park, H. M., and Song, J. H. (2012), A Study on the Fundamental Properties of Mortar using Ground Granulated Industrial Byproducts. Proceeding of KSRE, 2012(9), 227-232.
  8. Jang, H. O., and Jee, N. Y. (2013), An Experimental Study on the Mixing of Normal Strength and High Fluidity Concrete using Ground Granulated Blast Furnace Slag. Journal of the Architectural Institute of Korea Structure & Construction, AIK, 29(6), 81-88. https://doi.org/10.5659/JAIK_SC.2013.29.6.81
  9. Kim, J. Y., Kim, Y. S., and Kim, J. J. (2008), Analysis of Energy and co2 Emission to Evaluate Environmentally Sustainable Performance of Floor Components, Journal of the Architectural Institute of Korea Structure & Construction, 24(11), 297-304.
  10. Lee S. W. (2010), A Study on the Fluidity Properties and Strength Properties of Non-sintered Hwangtoh Mixed with PVA Fiber. Journal of The Korean Institute of Building Construction, 10(3), 49-56.
  11. Lee, H. C., Lee, G., and Go, S. S. (2006), An Experimental Study on the Properties of Hwangtoh Mortar for the Application of Construction Material. Proceeding of The Korean Institute of Building Construction, 6(2), 43-46.
  12. Lee, N. K., Hwang, H. Z., and Park, H. G. (2010), Flexural Performance of Activated Hwangtoh Concrete Beam, Journal of the Korea Concrete Institute, KCI, 22(4), 567-574. https://doi.org/10.4334/JKCI.2010.22.4.567
  13. Noushini, A., Samali, B., and Vessalas, K. (2013). Effect of Polyvinyl Alcohol (pva) Fibre on Dynamic and Material Properties of Fibre Reinforced Concrete, Construction and Building Materials, 49, 374-383. https://doi.org/10.1016/j.conbuildmat.2013.08.035
  14. Tak, S. Y., Hong, G. H., Kim, J. H. (2008), An Experimental Study on the Mechanical Properties of Hwangtoh Concrete. Proceeding of KCI Conforence, KCI, 2008(5), 689-692.
  15. Yang, K. H. (2010), Slump and Mechanical Properties of Hybrid Steel-pva Fiber Reinforced Concrete, Journal of the Korea Concrete Institute, KCI, 22(5), 651-658. https://doi.org/10.4334/JKCI.2010.22.5.651