DOI QR코드

DOI QR Code

Capacity Evaluation of SFRC Beams Using Recycled Fine and Coarse Aggregates

순환 잔골재 및 굵은골재를 사용한 SFRC 보의 성능 평가

  • Lee, Hyun-Ho (Department of Architecture & Fire Service Administration, Dongyang University)
  • 이현호 (동양대학교 건축소방행정학과)
  • Received : 2016.12.05
  • Accepted : 2016.12.14
  • Published : 2017.03.01

Abstract

The aim of this study is a large amount use of recycled aggregates. The considering recycled aggregates replacement ratio is 50% that of natural aggregates. In order to increase the shear capacity of beams, that may be weaken by use of recycled aggregates, steel fibers are reinforced. The main variables are steel fiber volume fractions such as 0%, 0.5%, 0.75% and 1.0%. After the test, it could confirm that the strength and deformation capacity of beams with the steel fiber content values of 0.5% and 0.75% are comprehensively enhanced compared to non reinforcement. After evaluating the shear strength by using shear strength equations of previous researches, it concluded that the strength equation of Oh et al. (2008) is able to predict the shear strength of SFRC beams on the safety side.

본 연구의 목적은 순환골재를 대량 사용하기 위한 것이다. 천연골재를 순환골재로 50% 치환한 보의 전단성능을 증진시키기 위하여 강섬유를 보강하였다. 강섬유 혼입율은 0%, 0.5%, 0.75% 및 1.0%이다. 실험 결과, 강섬유 혼입율 0.5%인 경우와 0.75%인 경우의 강도 및 변형능력이 비보강 대비 월등히 증진됨을 확인할 수 있었다. 기존 연구자의 전단강도식으로 실험체의 강도를 평가한 결과, Oh et al.(2008)의 전단강도식이 SFRC 보의 전단강도를 안전측으로 예측할 수 있는 것으로 평가되었다.

Keywords

References

  1. Ashour, S. A., Hasanain, G. S., and Wafa, F. F.(1992), Shear Behavior of High-Strength Fiber Reinforced Concrete Beams, ACI Structural Journal, 89(2), 176-184.
  2. Dinh, N. H., Choi, K. K. and Kim, H. S.(2016), Mechanical Properties and Modeling of Amorphous Metallic Fiber-Reinforced Concrete in Compression, Internal Journal of Concrete Structures and Materials, 10(2), 221-236. https://doi.org/10.1007/s40069-016-0144-9
  3. Ha, G. J., Yi, D. R., and Ha, J. H. (2013), Evaluation of Structural Performance of RC Beams Retrofitted Steel Fiber consequential Replacement of Recycled Coarse Aggregate and Ground Granulated Blast Furnace Slag, Journal of the Korea Concrete Institute, 25(5), 477-484. https://doi.org/10.4334/JKCI.2013.25.5.477
  4. Kwak, Y. K, Eberhard, M. O., Kim, W. S., and Kim, J. (2002), Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups, ACI Structural Journal, 99(4), 530-538.
  5. Lee, H. H. (2004), Evaluation of Shear Strength in SFRC Beam without Stirrups Considering Steel Fiber Strengthening Factor, Journal of the Korea Institute for Structural Maintenance Inspection, 8(2), 213-220.
  6. Lee, H. H. (2015), Material Strength Evaluation of Recycled Coarse Aggregate by Replacement Ratio, Proceeding of the Korea sInstitute for Structural Maintenance Inspection, Korea Institute for Structural Maintenance Inspection, 19(2), 463-464.
  7. Lee, H. H. and Lee, T. W. (2016), Experimental Study on Mechanical Properties and Deformation Behaior of Concrete with Recycled Aggregates and Steel Fiber, Journal of the Korea Concrete Institute, 28(3), 357-363. https://doi.org/10.4334/JKCI.2016.28.3.357
  8. Lee, H. H., and Hur, M. W. (2005), Shear Capacity Estimation of SFRC Members Considering Steel Fiber Strengthening Factor and Shear Reinforcement, Journal of the Architectural Institute of Korea Structure & Construction, 21(5), 35-42.
  9. Oh, Y. H., and Kim, J. H.(2008), Estimation of Flexural and Shear Strength for Steel Fiber Reinforced Flexural Members without Shear Reinforcements, Journal of the Korea Concrete Institute, 20(2), 257-267. https://doi.org/10.4334/JKCI.2008.20.2.257
  10. Sherif, Y., Kareemi, H., Anaam, A., Amani, Z. and Hiba, I. (2015), Strength and Durability Evaluation of Recycled Aggregate Concrete, Internal Journal of Concrete Structures and Materials, 9(2), 219-239. https://doi.org/10.1007/s40069-015-0100-0
  11. Shin, J. L., Kim, W. S., Baek, S. M., Kang, T. H. -K., and Kwak, Y. K. (2015), Structural Performance Evaluation of Steel Fiber-Reinforced Concrete Beams with Recycled Coarse Aggregates, Journal of the Korea Concrete Institute, 27(3), 215-227. https://doi.org/10.4334/JKCI.2015.27.3.215
  12. Shin, S. W., Oh, J. K. and Ghosh, S. K. (1994), Shear Behavior of Laboratory-Sized High-Strength Concrete Beams Reinforced with Bars and Steel Fibers, Fiber Reinforced Concrete Development and Innovations, ACI SP-142, 181-200.