Advances in concrete construction

  • 제5권5호
  • /
  • Pages.481-492
  • /
  • 2017
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of quartz powder, quartz sand and water curing regimes on mechanical properties of UHPC using response surface modelling

  • Mosaberpanah, Mohammad A. (Department of Civil Engineering, Cyprus International University (CIU)) ;
  • Eren, Ozgur (Department of Civil Engineering, Eastern Mediterranean University (EMU))
  • 투고 : 2017.04.27
  • 심사 : 2017.09.12
  • 발행 : 2017.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this paper is to investigate the effect of quartz powder (Qp), quartz sand (Qs), and different water curing temperature on mechanical properties including 7, 14, 28-day compressive strength and 28-day splitting tensile strength of Ultra High Performance Concrete and also finding the correlation between these variables on mechanical properties of UHPC. The response surface methodology was monitored to show the influences of variables and their interactions on mechanical properties of UHPC, then, mathematical models in terms of coded variables were established by ANOVA. The offered models are valid for the variables between: quartz powder 0 to 20% of cement substitution by cement weight, quartz sand 0 to 50% of aggregate substitution by crushed limestone weight, and water curing temperature 25 to $95^{\circ}C$.

키워드

참고문헌

  1. Aldahdooh, M.A.A., Bunnori, N.M. and Johari, M.M. (2013), "Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method", Mater. Des., 52, 957-965. https://doi.org/10.1016/j.matdes.2013.06.034
  2. Ambily, P.S., Ravisankar, K., Umarani, C., Dattatreya, J.K. and Iyer, N.R. (2013), "Development of ultra-high-performance geopolymer concrete", Mag. Concrete Res., 66(2), 82-89. https://doi.org/10.1680/macr.13.00057
  3. Arafa, M., Shihada, S. and Karmout, M. (2010), "Mechanical properties of ultra high performance concrete produced in the gaza strip", Asian J. Mater. Sci., 2(1), 1-12. https://doi.org/10.3923/ajmskr.2010.1.12
  4. De Larrard, F. and Sedran, T. (1994), "Optimization of ultra-high-performance concrete by the use of a packing model", Cement Concrete Res., 24(6), 997-1009. https://doi.org/10.1016/0008-8846(94)90022-1
  5. Kumar, V., Sondergeld, C.H. and Rai, C.S. (2012), "Nano to macro mechanical characterization of shale", Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers.
  6. Mohammed, B.S., Abdullahi, M. and Hoong, C.K. (2014), "Statistical models for concrete containing wood chipping as partial replacement to fine aggregate", Constr. Build. Mater., 55, 13-19. https://doi.org/10.1016/j.conbuildmat.2014.01.021
  7. Mosaberpanah, M.A. and Eren, O. (2016), "$CO_2$-full factorial optimization of an ultra-high performance concrete mix design", Eur. J. Environ. Civil Eng., 1-14.
  8. Prem, P.R., Murthy, A.R. and Bharatkumar, B.H. (2015), Influence of Curing Regime and Steel Fibres on the Mechanical Properties of UHPC.
  9. Reda, M.M., Shrive, N.G. and Gillott, J.E. (1999), "Microstructural investigation of innovative UHPC", Cement Concrete Res., 29(3), 323-329. https://doi.org/10.1016/S0008-8846(98)00225-7
  10. Reddy, T.C.S. and Elumalai, J.K. (2014), Study of Macro Mechanical Properties of Ultra High Strength Concrete Using Quartz Sand and Silica Fume.
  11. Richard, P. and Cheyrezy, M. (1995), "Composition of reactive powder concretes", Cement Concrete Res., 25(7), 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2
  12. Sahani, B.S. and Ray, N.H.S. (2014), "A comparative study of reactive powder concrete and ordinary Portland cement by ultra high strength technology", J. Res., 1(6), 524-534.
  13. Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z. and Fang, Z. (2015), "A review on ultra high performance concrete: Part II. Hydration, microstructure and properties", Constr. Build. Mater., 96, 368-377. https://doi.org/10.1016/j.conbuildmat.2015.08.095
  14. Wang, X.Y. (2014), "Properties prediction of ultra high performance concrete using blended cement hydration model", Constr. Build. Mater., 64, 1-10. https://doi.org/10.1016/j.conbuildmat.2014.04.084
  15. Wille, K. and Boisvert-Cotulio, C. (2015), "Material efficiency in the design of ultra-high performance concrete", Constr. Build. Mater., 86, 33-43. https://doi.org/10.1016/j.conbuildmat.2015.03.087
  16. Yazici, H. (2007), "The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures", Build. Environ., 42(5), 2083-2089. https://doi.org/10.1016/j.buildenv.2006.03.013
  17. Yu, R., Spiesz, P. and Brouwers, H.J.H. (2014), "Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)", Cement Concrete Res., 56, 29-39. https://doi.org/10.1016/j.cemconres.2013.11.002

피인용 문헌

  1. Effect of FC3R on the properties of ultra-high-performance concrete with recycled glass vol.86, pp.211, 2019, https://doi.org/10.15446/dyna.v86n211.79596
  2. Static behavior of stud shear connectors with initial damage in steel-UHPC composite bridges vol.9, pp.4, 2017, https://doi.org/10.12989/acc.2020.9.4.413
  3. The use of river sand for fine aggregate in UHPC and the effect of its particle size vol.10, pp.5, 2017, https://doi.org/10.12989/acc.2020.10.5.431
  4. Performance investigation of palm kernel shell ash in high strength concrete production vol.26, pp.6, 2017, https://doi.org/10.12989/cac.2020.26.6.577