Abstract
This study discusses the applicability of environmental friendly EVA based butyl rubber self-adhesive waterproof sheet designed to prevent corrosion of large scale pipes used in the water treatment facilities during th water treatment process. The experiments conducted tested the waterproofing sheet's adhesion strength on the steel surface of the pipes and checked for whether the material has the proper response properties against the various environmental conditions. In addition, it the sheet adhered to the steel pipe was to see if the adhesion hold against the water pressure due to the ingress of inflow water. Finally, the waterproofing sheet's adhesion strength was tested on a rusted steel surface to confirm whether the material has the necessary properties to secure stable adhesion strength and prevent corrosion of steel pipes at the same time during the process of installation or maintenance. As a result, the self-adhesive waterproof sheets showed that all attachments in the untreated, long term pressuring, immersion in chemical substance (hydrochloric acid, hypochlorous acid, sodium hydroxide), low temperature ($-20^{\circ}C$) conditions showed a adhesion performance of higher than 1.5N/mm, which is the performance standard of KS F 4934. Also, in the testing to check for the adhesion property against inverse water pressure, it was observed that the adhesion failure did not occur even up to $3.0N/mm^2$ pressure. Also, in the process of assessing the adhesion performance on rusted steel surface, specimens after 12 hours of corrosion treatment was shown to have 2.1N/mm, and specimens after 168 hours of corrosion treatment was shown to have 2.0N/mm adhesion strength performance.
본 연구는 상수도 급수과정에 사용되는 대구경 강관이 정수과정에서 사용되는 약품으로 인하여 부식이 발생하게 되고 이를 보수하기 위하여 친환경 소재인 EVA 시트 및 강관과의 부착을 용의하게 할 수 있는 부틸고무를 적용하여 자착식 방수방식 시트를 개발하였다. 이에 자착식 방수방식 시트에 대한 강판과의 부착강도를 확인하고, 강관에 발생될 수 있는 다양한 환경조건에서의 부착강도를 확인하였다. 또한 외부에서 침입하는 유입수의 수압에 의해 강관에 부착된 시트의 탈락여부를 확인하였으며, 마지막으로 강관이 부식된 환경과 유사하게 강판에 녹을 발생시켜 자착식 방수방식 시트와 부착강도를 확인함으로써 대구경강관 보수 시 시공 용의성 외에도 안정적인 부착강도를 확보하여 강관의 부식을 차단함과 동시에 안정적인 성능 유지 방안을 확인하고자 하였다. 그 결과 본 연구에 사용된 자착식 방수방식 시트는 강관에 대한 무처리, 장기 누름, 장기 침수 내화학(염산, 차아염소산, 수산화나트륨), 저온($-20^{\circ}C$) 및 습윤 건조 반복에서의 모든 부착성능은 KS F 4934의 성능기준인 1.5N/mm 이상을 상회하는 부착강도가 나타났으며, 배면 누수압에 따른 시트의 탈락현상을 확인하는 시험에서도 배면 누수압 $3.0N/mm^2$까지 시트의 탈락이 발생되지 않았다. 또한 녹이 발생된 강관에서의 부착성능을 확인하는 과정에서도 12시간동안 녹을 발생시킨 시험편에서 2.1N/mm, 168시간동안 녹을 발생시킨 시험편에서 2.0N/mm 의 성능이 나타남에 따라 녹 발생 강관에 대한 안정성이 확인되었다.