참고문헌
- M. Y. Demeri, 2013, Advanced High-Strength Steel: Science, Technology, Application, ASM International.
- H. Komine, M. Asakura, T. Geka, T. Kiso, M. Takamura, T. Sugiyama, M. Asakawa, 2016, Reduction of Springback for Hat Channel with High-strength Steel Sheets by Stroke-returning Deep-drawing Process, J. Jpn. Soc. Technol. Plast., Vol. 57, No. 660, pp. 60-65. https://doi.org/10.9773/sosei.57.60
- T. Yoshida, K. Sato, E. Isogai, K. Hashimoto, 2014, Springback Problems in Forming of High-strength Steel Sheets and Countermeasures, Nippon Steel Technical Report, Vol. 103, pp. 4-10.
- N. Shinomiya, N. Shirakawa, 2013, Estimation of Numerical Control Servo Press Motion for Deep Drawing, J. Jpn. Soc. Technol. Plast., Vol. 54, No. 629, pp. 78-82.
- Y. Tamai, Y. Yamasaki, A. Yoshitake, T. Imura, 2010, Improving Deep Drawability of Steel Sheet by Motion Control of Servo Press, J. Jpn. Soc. Technol. Plast., Vol. 51, No. 592, pp. 68-72.
- N. Shinomiya, N. Shirakawa, 2015, Improved form Accuracy Througt Slide Motion Control in Impact Extrusion of Square Cups, J. Jpn. Soc. Technol. Plast., Vol. 56, No. 654, pp. 47-52. https://doi.org/10.9773/sosei.56.47
- T. Iwata, N. Iwata, S. Hotta, 2015, Material Model Incorporating Strain Rate and Sheet Metal Forming Analysis Under Slide Motion, J. Jpn. Soc. Technol. Plast., Vol. 56, No. 658, pp. 81-86.
- N. Shinomiya, N. Shirakawa, 2013, Estimation of Numerical Control Servo Press Motion for Deep Drawing, J. Jpn. Soc. Technol. Plast., Vol. 54, No. 629, pp. 78-82.
- K. H. Kang, S. H. Kim, H. C. Ro, 2016, Change in Springback Tendency during Forming of a Hat-type Product with High Strength Steel using a Digital Servo Press, Trans. Mater. Process., Vol. 25, No. 1, pp. 21-28. https://doi.org/10.5228/KSTP.25.1.21