한국신뢰성학회지:신뢰성응용연구 (Journal of Applied Reliability)

  • 제17권3호
  • /
  • Pages.236-245
  • /
  • 2017
  • /
  • 1738-9895(pISSN)
  • /
  • 2733-8320(eISSN)
한국신뢰성학회 (The Korean Reliability Society)
권호 표지

위상배열 탐상검사법을 이용한 풍력발전용 블레이드의 일정가압 메커니즘 신뢰성 평가

Reliability Evaluation of Constant Pressure Mechanism on Phased Array Ultrasonic Testing for Wind Turbine Blade

  • 남문호 ((주)삼영검사엔지니어링 부설연구소) ;
  • 지수정 ((주)삼영검사엔지니어링 부설연구소) ;
  • 임선 (전자부품연구원) ;
  • 임승환 (전자부품연구원) ;
  • 정예찬 (전자부품연구원)
  • Nam, Mun Ho (Samyong Inspection Engineering co., LTD) ;
  • Chi, Su Chung (Samyong Inspection Engineering co., LTD) ;
  • Lim, Sun (Department of Engineering, Korea Electronic Technology Institute) ;
  • Lim, Seung Hwan (Department of Engineering, Korea Electronic Technology Institute) ;
  • Jeong, Ye Chan (Department of Engineering, Korea Electronic Technology Institute)
  • 투고 : 2017.08.01
  • 심사 : 2017.09.01
  • 발행 : 2017.09.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: There is no established inspection system for composite wind blade during the fabrication stage even though the blades are one of the most important part at wind generation system, but phased array ultrasonic testing method has been continuously studied about wind turbine blade with composite. When wind turbine blade with complex shape by phased array probe is inspected, it is necessary to study for system keeping constant pressure using pressure device. Methods: In this paper, we propose constant pressure device for inspecting wind turbine blade by phased array ultrasonic test method. Design of the device controller is based on Hunt-Crossley model. We evaluate reliability of phased array ultrasonic inspection result that applicated constant pressure device. Result: Defect indication is precise and its error is small when constant pressure mechanism based on Hunt-Crossley model was used. Conclusion: When inspection is progressed using constant pressure mechanism, the reliability of composite wind blade inspection can be improved.

키워드

참고문헌

  1. Korea New and Renewable Energy Center (2016). "2016 New and Renewable Energy White Pater".
  2. International Energy Agency (2016). "World Energy Outlook 2016".
  3. Global Wind Energy Council (2017). "GLOBAL WIND REPORT 2016".
  4. Chi, S. C., Cho, B. J., Nam, M. H., and Lim, S. (2017). "Detection of the Delamination in composite wind blade by Phased Array Ultrasonic Technology". Journal of the Korean society for nondestructive testing, Vol. 37, No. 3, pp. 183-191. https://doi.org/10.7779/JKSNT.2017.37.3.183
  5. Kang, B. K., Nam, M. H., and Lim, I. S. (2014). "A Study on Reliability Validation by Infrared Thermography of Composite Material Blade for Wind Turbine Generator". Journal of Applied Reliability, Vol. 14, No. 3, pp. 176-181.
  6. Nam, M. H., Jung, H. S., Kim, C. H., Kang, B. K., and Lim, I. S. (2012). "An Evaluation on Suitable of Wind Blade Inspection with Phased Array Ultrasonic Testing (PAUT)". 2014 Annual fall conference of Korea society for nondestructive testing, pp. 383-387.
  7. Amenabar, I., Mendikute, A., Lopez-Arraiza, A., Lizaranzu, M., and Aurrekoetxea, J. (2011). "Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades". Composites Part B: Engineering, Vol. 42, Issue. 5, pp. 1298-1305. https://doi.org/10.1016/j.compositesb.2011.01.025
  8. Drewry, M. A. and Georgiou, G. A. (2007). "A review of NDT techniques for wind turbines". Insight Non-Destructive Testing and Condition Monitoring, Vol. 49, No. 3, pp. 137-141. https://doi.org/10.1784/insi.2007.49.3.137
  9. Galappaththi, U. I. K., De Silva, A. K. M., Macdonald, M., and Adewale, O. R. (2012). "Review of inspection and quality control techniques for composite wind turbine blades". Insight Non-Destructive Testing and Condition Monitoring, Vol. 54, No. 2, pp. 82-35. https://doi.org/10.1784/insi.2012.54.2.82
  10. Nam, M. H., Jung, J. Y., and Kim, C. H. (2012). "Analysis of Characteristic of the Wind Turbine Blade Damage". KIEE summer annual conference 2012, 10-P-013.
  11. Nam, J. U., Lim, S., and Yoon, T. W. (2016). "One-degree-of-freedom PD force control for Inspecting the bonded parts of a wind generator blade using the Hunt-Crossley model". KIEE, CICS 2016, pp. 4-5.
  12. Hunt, K. H. and Crossley, F. R. E. (1975). "Coefficient of Restitution interpreted as Damping in Vibroimpact". ASME J. Appl. Mech., pp. 440-445.