Molding Method Determination of Cushion for Improving Reliability of the Rotation Driving System

회전 구동부의 신뢰성 개선을 위한 쿠션 성형 방법의 결정

  • Nam, Yoonwook (1st Land System Team, Defense Agency for Technology and Quality) ;
  • Son, Kijoong (1st Land System Team, Defense Agency for Technology and Quality) ;
  • Sung, Si-Il (Department of Industrial and Management Engineering, Inje University)
  • 남윤욱 (국방기술품질원 기동화력1팀) ;
  • 손기중 (국방기술품질원 기동화력1팀) ;
  • 성시일 (인제대학교 공과대학 산업경영공학과)
  • Received : 2017.07.26
  • Accepted : 2017.09.01
  • Published : 2017.09.25

Abstract

Purpose: This article provides an efficient cushion molding method for improving reliability of the rotation driving system. Method: Allowable stress level for cushion is calculated by using physical characteristics of the rotation driving system. In addition, various test units are manufactured and used to conduct the rebound resilience, the burst pressure and the alternating load test. Results: Actual allowable stress level and test results of the rebound resilience, the burst pressure and the alternating load test are provided. Conclusion: The cushion manufactured by the compression molding method gives more preferable characteristics for improving the reliability of the rotation driving system.

Keywords

References

  1. Park, G. C. and Ha, J. S. (2009). "L-band Pulsed Doppler Radar Development for Main Battle Tank". The Journal of Korean Institute of Electromagnetic Engineering and Science, Vol. 20, No. 6, pp. 580-588. https://doi.org/10.5515/KJKIEES.2009.20.6.580
  2. Lee, H. K. and Kim, J. B. (2014). "Prediction of Active Protection Performance of a Plate". The Korean Society of Mechanical Engineers, No. 2, p. 169.
  3. Koo, B. M., Choi, S. J., and Choi, J. K. (2006). "Development of a Precision BLDC Servo Position Controller for Composite Smoke Bomb Azimuth Driving System". The Korean Institute of Maritime Information and Communication Sciences, Vol. 10, No. 3, pp. 467-472.
  4. Park, Y. H. and Cho, C. G. (1998). "Synthesis and Characterization of PBS-PTMG Segmented Block Copolymer". The Polymer Society of Korea, Vol .22, No. 4, pp. 559-569.
  5. Woo, C. S., Park, H. S., and Lee, G. A. (2008). "Physical Test and Finite Element Analysis of Elastomer for Steel Rack Tube Forming". The Korean Society of Mechanical Engineers, Vol. 43, No. 3, pp. 173-182.
  6. Lee, J. M., Kim, B. M., and Ko, D. C. (2016). "CFRP Compression Forming Technology". The Korean Society for Technology of Plasticity, Vol. 25, No. 3, pp. 203-208.
  7. Lee, Y. C. (2013). "The Improvement of Weldline and Flow mark Defection by using Injection Molding Analysis". The Korean Society of Precision Engineering, Vol. 30, No. 12, pp. 1295-1301. https://doi.org/10.7736/KSPE.2013.30.12.1295
  8. The Korea Agency for Technology and Standards. (2006). "KS M 6518, Physical Test Methods for Vulcanized Rubber". pp. 3-20.
  9. Yoo, S. R., Ju, J. H., Choi, S. J., and Kim, D. M. (2016). "Non Linear Viscoelastic Constitutive Relation of Elastomers for Hysteresis Behavior". The Korean Society of Mechanical Engineers, Vol. 40, No. 4, pp. 353-362. https://doi.org/10.3795/KSME-A.2016.40.4.353
  10. Sohn, B. Y. and Park, C. Y. (1997). "Estimation of Loss Energy from the Measurement Returning Time of Rebound for Carbon Black-Filled Natural Rubber Compounds". The Korean Institute of Chemical Engineers, Vol. 35, No. 2, pp. 154-161.
  11. Kim, Y. S., Beak, U. K., and Jung, H. C. (1999) "The Study of Track Rubber Parts on Heat Generation Mechanism". The Korean Society For Power System Engineering, pp. 150-156.
  12. Park, T. S. and Lee, Y. S. (2006). "Behavior of High-elastic Stress Absorbing Interlayer for Reflective Cracking Resistance". Korean Society of Civil Engineers, Vol. 26, No. 3, pp. 445-451.
  13. Lee, K. Y. and Baik, W. C. (1990). "Stress Analysis and Fatigue Failure of Rubber in Automobile". The Korean Society of Automotive Engineers, Vol. 12, No. 2, pp. 11-15.
  14. Yoon, H. J,. Nam, Y. W., and Kim, K. R. (2016). "A Study on the Impact Resistance Improvement of Reducer by Impact Load". The Korean Society of Mechanical Technology, Vol. 18, No. 4, pp. 591-596. https://doi.org/10.17958/ksmt.18.4.201608.591