DOI QR코드

DOI QR Code

Fracture properties of concrete using damaged plasticity model -A parametric study

  • Kalyana Rama, J.S. (Department of Civil Engineering, BITS Pilani, Hyderabad Campus) ;
  • Chauhan, D.R. (Department of Civil Engineering, BITS Pilani, Hyderabad Campus) ;
  • Sivakumar, M.V.N (Department of Civil Engineering, National Institute of Technology) ;
  • Vasan, A. (Department of Civil Engineering, BITS Pilani, Hyderabad Campus) ;
  • Murthy, A. Ramachandra (CSIR-Structural Engineering Research Centre)
  • 투고 : 2017.02.01
  • 심사 : 2017.07.10
  • 발행 : 2017.10.10

초록

The field of fracture mechanics has gained significance because of its ability to address the behaviour of cracks. Predicting the fracture properties of concrete based on experimental investigations is a challenge considering the quasi-brittle nature of concrete. So, there is a need for developing a standard numerical tool which predicts the fracture energy of concrete which is at par with experimental results. The present study is an attempt to evaluate the fracture energy and characteristic length for different grades of concrete using Concrete Damage Plasticity (CDP) model. Indian Standard and EUROCODE are used for the basic input parameters of concrete. Numerical evaluation is done using Finite Element Analysis Software ABAQUS/CAE. Hsu & Hsu and Saenz stress-strain models are adopted for the current study. Mesh sensitivity analysis is also carried to study the influence of type and size of elements on the overall accuracy of the solution. Different input parameters like dilatation angle, eccentricity are varied and their effect on fracture properties is addressed. The results indicated that the fracture properties of concrete for various grades can be accurately predicted without laboratory tests using CDP model.

키워드

참고문헌

  1. Alyhya, W., Dhaheer, M.A., Al-Rubaye, M. and Karihaloo, B. (2016), "Influence of mix composition and strength on the fracture properties of self-compacting concrete", Constr. Build. Mater., 110, 312-322. https://doi.org/10.1016/j.conbuildmat.2016.02.037
  2. Birtel, V. and Mark, P. (2006), "Parameterised finite element modelling of RC beam shear failure", 2006 ABAQUS Users Conference.
  3. Brestler, B. and Pister, K.S. (1958a), "Behaviour of concrete under triaxle compressive-compressive-tensile stresses", ACI Mater. J., 8(2), 181-185.
  4. Brestler, B. and Pister, K.S. (1958b), "Strength of concrete under combined stresses", Proc. ACI J., 55, 321-345.
  5. Carreira, D.J. and Chu, K.H. (1985), "Stress-strain relationship for plain concrete in compression", Proc. ACI J., 82, 797-804.
  6. Cement and Concrete Sectional Committee, CED 2 (2000), Indian Standard Plain and reinforced concrete-code of practice (IS 456: 2000), Bureau of Indian Standards.
  7. Chen, A.C. and Chen, W.F. (1975), "Constitutive relations for concrete", J. Eng. Mech., 101(4), 465-481.
  8. Chuan-Zhi, W., Zhen-Hai, G. and Xiu-Qin, Z. (1987), "Experimental investigation of biaxial and triaxle compressive concrete strength", ACI Mater. J., 84(2), 92-100.
  9. Elices, M., Guinea, G. and Planas, J. (1992), "Measurement of the fracture energy using three-point bend tests: Part 3-influence of cutting the P- tail", Mater. Struct., 25(6), 327-334. https://doi.org/10.1007/BF02472591
  10. European Committee for Standards, E.C. (2008), BS EN 1992-1-1 - Design of concrete structures. General rules and rules for buildings, CEN, Brussels.
  11. Gardner, N.J. (1969), "Triaxial behaviour of concrete", Proc. ACI J., 66, 136-158.
  12. Guinea, G., Planas, J. and Elices, M. (1992), "Measurement of the fracture energy using three-point bend tests: Part 1-Influence of experimental procedures", Mater. Struct., 25(4), 212-218. https://doi.org/10.1007/BF02473065
  13. Hillerborg, A., Moder, M. and Petersson, P.E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6(6), 773-782. https://doi.org/10.1016/0008-8846(76)90007-7
  14. Hsu, L.S. and Hsu, C.T. (1994), "Stress-strain behaviour of steel-fiber high-strength concrete under compression", ACI Struct. J., 91(4), 448-457.
  15. Hu, X.Z. and Wittmann, F. (1992), "Fracture energy and fracture process zone", Mater. Struct., 25(6), 319-326. https://doi.org/10.1007/BF02472590
  16. Karihaloo, B., Abdalla, H. and Imjai, T. (2003), "A simple method for determining the true specific fracture energy of concrete", Mag. Concrete Res., 55(5), 471-481. https://doi.org/10.1680/macr.2003.55.5.471
  17. Kmiecik, P. and Kamin'ski, M. (2011), "Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration", Arch. Civil Mech. Eng., 11(3), 623-636. https://doi.org/10.1016/S1644-9665(12)60105-8
  18. Kotsovos, M. and Newman, J. (1977), "Behaviour of concrete under multiaxial stress", Proc. ACI J., 74, 443-446.
  19. Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1969), "Behaviour of concrete under biaxial stresses", Proc. ACI J., 66, 656-666.
  20. Kupfer, H.B. and Gerstle, K.H. (1973), "Behaviour of concrete under biaxial stresses", J. Eng. Mech. Div., 99(4), 853-866.
  21. Kwak, H.G. and Filippou, F.C. (1990), "Finite element analysis of reinforced concrete structures under monotonic loads", Department of Civil Engineering, University of California Berkeley, CA.
  22. L'opez-Almansa, F., Alfarah, B. and Oller, S. (2014), "Numerical simulation of RC frame testing with damaged plasticity model. Comparison with simplified models", Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey,
  23. Lee, S.K., Song, Y.C. and Han, S.H. (2004), "Biaxial behaviour of plain concrete of nuclear containment building", Nucl. Eng. Des., 227(2), 143-153. https://doi.org/10.1016/j.nucengdes.2003.09.001
  24. Majewski, S. (2003), The Mechanics of Structural Concrete in Terms of Elasto-Plasticity, Silesian Polytechnic Publishing House, Gliwice.
  25. Mills, L.L. and Zimmerman, R.M. (1970), "Compressive strength of plain concrete under multiaxial loading conditions", J. Am. Concrete Inst., 67(10), 802-807.
  26. Murthy, A.R., Karihaloo, B.L., Iyer, N.R. and Prasad, B.R. (2013), "Determination of size-independent specific fracture energy of concrete mixes by two methods", Cement Concrete Res., 50, 19-25. https://doi.org/10.1016/j.cemconres.2013.03.015
  27. Muthukumar, G. and Kumar, M. (2014), "Failure criteria of concrete-A review", Comput. Concrete, 14(5), 503-526. https://doi.org/10.12989/cac.2014.14.5.503
  28. Planas, J., Elices, M. and Guinea, G.(1992), "Measurement of the fracture energy using three-point bend tests: Part 2-Influence of bulk energy dissipation", Mater. Struct., 25(5), 305-312. https://doi.org/10.1007/BF02472671
  29. RILEM Technical Committee 50-FMC (1985), "Draft recommendation: determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams", Mater. Struct., 18(106), 285-290. https://doi.org/10.1007/BF02472917
  30. Saenz, L. (1964), "Discussion of equation for the stress-strain curve of concrete, by P. Desayi and S. Krishnan", ACI J., 61, 1229-1235.
  31. Upreti, G., Murthy, A.R., Goptinath, S., Iyer, N.R. and Venkat, L. (2016), "Strength and ductility of RC beams strengthened with ultra-high strength cementitious composite overlay", J. Struct. Eng. (Madras), 43(2), 190-198.
  32. Wahalathantri, B.L. (2012), "Damage assessment in reinforced concrete flexural members using modal strain energy based method", Ph.D. Thesis, Queensland University of Technology.

피인용 문헌

  1. Three-Dimensional Reconstruction and Numerical Simulation Analysis of Acid-Corroded Sandstone Based on CT vol.2021, pp.None, 2017, https://doi.org/10.1155/2021/5582781
  2. Experimental Study and Extended Finite Element Simulation of Fracture of Self-Compacting Rubberized Concrete vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/6622880
  3. Numerical evaluation of effects of shear span, stirrup spacing and angle of stirrup on reinforced concrete beam behaviour vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.309