DOI QR코드

DOI QR Code

Vibration of a rotary FG plate with consideration of thermal and Coriolis effects

  • Ghadiri, Majid (Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University) ;
  • Shafiei, Navvab (Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University) ;
  • Babaei, Ramin (Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University)
  • 투고 : 2016.05.09
  • 심사 : 2017.07.13
  • 발행 : 2017.10.10

초록

In this paper, Coriolis effect on vibration behavior of a rotating rectangular plate made of functionally graded (FG) materials under thermal loading has been investigated. The material properties of the FG plate are supposed to get changed in parallel with the thickness of the plate and the thermal properties of the material are assumed to be thermo-elastic. In this research, the effect of hub size, rotating speed and setting angle are considered. Governing equation of motion and the associated boundary conditions are obtained by Hamilton's principle. Generalized differential quadrature method (GDQM) is used to solve the governing differential equation with respect to cantilever boundary condition. The results were successfully verified with the published literatures. These results can be useful for designing rotary systems such as turbine blades. In this work, Coriolis and thermal effects are considered for the first time and GDQM method has been used in solving the equations of motion of a rotating FGM plate.

키워드

참고문헌

  1. Aranda-Ruiz, J., Loya, J. and Fernandez-Saez, J. (2012), "Bending vibrations of rotating nonuniform nanocantilevers using the Eringen nonlocal elasticity theory", Compos. Struct., 94(9), 2990-3001. https://doi.org/10.1016/j.compstruct.2012.03.033
  2. Bernardo, G.M.S., Damasio, F.R., Silva, T.A.N. and Loja, M.A. R. (2016), "A study on the structural behaviour of FGM plates static and free vibrations analyses", Compos. Struct., 136, 124-138. https://doi.org/10.1016/j.compstruct.2015.09.027
  3. Ghadiri, M. and Shafiei, N. (2015), "Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen's theory using differential quadrature method", Microsyst. Technol., 1-15.
  4. Hong, C.C. (2012), "Rapid heating induced vibration of magnetostrictive functionally graded material plates", J. Vib. Acoust., 134(2), 021019. https://doi.org/10.1115/1.4004663
  5. Huang, Y. and Li, X.F. (2010), "A new approach for free vibration of axially functionally graded beams with non-uniform crosssection", J. Sound Vib., 329(11), 2291-2303. https://doi.org/10.1016/j.jsv.2009.12.029
  6. Huang, S.C. and Soedel, W. (1987), "Effects of coriolis acceleration on the free and forced in-plane vibrations of rotating rings on elastic foundation", J. Sound Vib., 115(2), 253-274. https://doi.org/10.1016/0022-460X(87)90471-8
  7. Ketabdari, M.J., Allahverdi, A., Boreyri, S. and Ardestani, M.F. (2016), "Free vibration analysis of homogeneous and FGM skew plates resting on variable Winkler-Pasternak elastic foundation", Mech. Ind., 17(1), 107. https://doi.org/10.1051/meca/2015051
  8. Lessia, A.W. (1969), Vibration of plates, NASA SP, p. 160.
  9. Li, L. and Zhang, D.G. (2016), "Free vibration analysis of rotating functionally graded rectangular plates", Compos. Struct., 136, 493-504. https://doi.org/10.1016/j.compstruct.2015.10.013
  10. Malgaca, L., Al-Qahtani, H. and Sunar, M. (2015), "Vibration control of rotating blades using root-embedded piezoelectric materials", Arab. J. Sci. Eng., 40(5), 1487-1495. https://doi.org/10.1007/s13369-014-1566-9
  11. Park, J.S. and Kim, J.H. (2006), "Thermal postbuckling and vibration analyses of functionally graded plates", J. Sound Vib., 289(1), 77-93. https://doi.org/10.1016/j.jsv.2005.01.031
  12. Prakash, T., Singha, M.K. and Ganapathi, M. (2012), "A finite element study on the large amplitude flexural vibration characteristics of FGM plates under aerodynamic load", Int. J. Non-Linear Mech., 47(5), 439-447. https://doi.org/10.1016/j.ijnonlinmec.2011.08.004
  13. Pandey, S. and Pradyumna, S. (2015), "Free vibration of functionally graded sandwich plates in thermal environment using a layerwise theory", Eur. J. Mech.-A/Solids, 51, 55-66. https://doi.org/10.1016/j.euromechsol.2014.12.001
  14. Ramu, I. and Mohanty, S.C. (2015), "Free vibration and dynamic stability of functionally graded material plates on elastic foundation", Defence Sci. J., 65(3), 245-251. https://doi.org/10.14429/dsj.65.8621
  15. Shokrani, M.H., Karimi, M., Tehrani, M.S. and Mirdamadi, H.R. (2015), "Buckling analysis of double-orthotropic nanoplates embedded in elastic media based on non-local two-variable refined plate theory using the GDQ method", J. Brazil. Soc. Mech. Sci. Eng., 1-18.
  16. Sofiyev, A.H. (2015), "On the vibration and stability of shear deformable FGM truncated conical shells subjected to an axial load", Compos. Part B: Eng., 80, 53-62. https://doi.org/10.1016/j.compositesb.2015.05.032
  17. Sreenivasamurthy, S. and Ramamurti, V. (1981a), "A parametric study of vibration of rotating pre-twisted and tapered low aspect ratio cantilever plates", J. Sound Vib., 76(3), 311-328. https://doi.org/10.1016/0022-460X(81)90515-0
  18. Sreenivasamurthy, S. and Ramamurti, V. (1981b), "Coriolis effect on the vibration of flat rotating low aspect ratio cantilever plates", J. Strain Anal. Eng. Des., 16(2), 97-106. https://doi.org/10.1243/03093247V162097
  19. Subrahmanyam, K.B. and Kaza, K.R.V. (1986), "Vibration and buckling of rotating, pretwisted, preconed beams including Coriolis effects", J. Vib. Acoust. Stress Reliabil. Des., 108(2), 140-149. https://doi.org/10.1115/1.3269314
  20. Tornabene, F., Fantuzzi, N., Viola, E. and Reddy, J.N. (2014), "Winkler-Pasternak foundation effect on the static and dynamic analyses of laminated doubly-curved and degenerate shells and panels", Compos. Part B: Eng., 57, 269-296. https://doi.org/10.1016/j.compositesb.2013.06.020
  21. Tornabene, F., Fantuzzi, N., Viola, E. and Batra, R.C. (2015a), "Stress and strain recovery for functionally graded free-form and doubly-curved sandwich shells using higher-order equivalent single layer theory", Compos. Struct., 119, 67-89. https://doi.org/10.1016/j.compstruct.2014.08.005
  22. Tornabene, F., Fantuzzi, N., Ubertini, F. and Viola, E. (2015b), "Strong formulation finite element method based on differential quadrature: A survey", Appl. Mech. Rev., 67(2), 020801. https://doi.org/10.1115/1.4028859
  23. Wang, J.S., Shaw, D. and Mahrenholtz, O. (1987), "Vibration of rotating rectangular plates", J. Sound Vib., 112(3), 455-468. https://doi.org/10.1016/S0022-460X(87)80111-6
  24. Wang, Z., Zhao, M. and Yang, J. (2015a), "A piezoelectric gyroscope with self-equilibrated coriolis force based on overtone thickness-shear modes of a lithium niobate plate with an inversion layer", Sensors J., IEEE, 15(3), 1794-1799.
  25. Wang, Y.T., Luan, P.G. and Zhang, S. (2015b), "Coriolis force induced topological order for classical mechanical vibrations", New J. Phys., 17(7), 073031. https://doi.org/10.1088/1367-2630/17/7/073031
  26. Yang, J. and Shen, H.S. (2002), "Vibration characteristics and transient response of shear-deformable functionally graded plates in thermal environments", J. Sound Vib., 255(3), 579-602. https://doi.org/10.1006/jsvi.2001.4161
  27. Yin, S., Yu, T. and Liu, P. (2013), "Free vibration analyses of FGM thin plates by isogeometric analysis based on classical plate theory and physical neutral surface", Adv. Mech. Eng., 5, 634584. https://doi.org/10.1155/2013/634584
  28. Yoo, H.H. and Pierre, C. (2003), "Modal characteristic of a rotating rectangular cantilever plate", J. Sound Vib., 259(1), 81-96. https://doi.org/10.1006/jsvi.2002.5182
  29. Young, T.H. and Liou, G.T. (1992), "Coriolis effect on the vibration of a cantilever plate with time-varying rotating speed", J. Vib. Acoust., 114(2), 232-241. https://doi.org/10.1115/1.2930253

피인용 문헌

  1. Nonlocal three-dimensional theory of elasticity for buckling behavior of functionally graded porous nanoplates using volume integrals vol.5, pp.9, 2018, https://doi.org/10.1088/2053-1591/aad4c3
  2. Vibration of multilayered functionally graded deep beams under thermal load vol.24, pp.6, 2017, https://doi.org/10.12989/gae.2021.24.6.545