Smart Structures and Systems

  • 제20권3호
  • /
  • Pages.285-301
  • /
  • 2017
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Self-powered hybrid electromagnetic damper for cable vibration mitigation

  • Jamshidi, Maziar (Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology) ;
  • Chang, C.C. (Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology) ;
  • Bakhshi, Ali (Department of Civil Engineering, Sharif University of Technology)
  • 투고 : 2016.01.30
  • 심사 : 2017.08.07
  • 발행 : 2017.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the design and the application of a new self-powered hybrid electromagnetic damper that can harvest energy while mitigating the vibration of a structure. The damper is able to switch between an energy harvesting passive mode and a semi-active mode depending on the amount of energy harvested and stored in the battery. The energy harvested in the passive mode resulting from the suppression of vibration is employed to power up the monitoring and electronic components necessary for the semi-active control. This provides a hybrid control capability that is autonomous in terms of its power requirement. The proposed hybrid circuit design provides two possible options for the semi-active control: without energy harvesting and with energy harvesting. The device mechanism and the circuitry that can drive this self-powered electromagnetic damper are described in this paper. The parameters that determine the device feasible force-velocity region are identified and discussed. The effectiveness of this hybrid damper is evaluated through a numerical simulation study on vibration mitigation of a bridge stay cable under wind excitation. It is demonstrated that the proposed hybrid design outperforms the passive case without external power supply. It is also shown that a broader force range, facilitated by decoupled passive and semi-active modes, can improve the vibration performance of the cable.

키워드

과제정보

연구 과제 주관 기관 : Hong Kong University of Science and Technology

참고문헌

  1. Caetano, E.d.S. (2007). Cable Vibration in Cable-stayed Bridges, International Association for Bridge and Structural Engineering, Switzerland.
  2. Cahill, P., Nuallain, N.A.N., Jackson, N., Mathewoson, A., Karoumi, R. and Pakrashi, V. (2014), "Energy harvesting from train-induced response in bridges", J. Bridge Eng., 19(9).
  3. Casciati, F. and Rossi, R. (2007), "A power harvester for wireless sensing applications", Struct. Control Health Monit., 14(4), 649-659. https://doi.org/10.1002/stc.179
  4. Casciati, S., Faravelli, L. and Chen, Z. (2012), "Energy harvesting and power management of wireless sensors for structural control applications in civil engineering", Smart Struct. Syst., 10(3), 299-312. https://doi.org/10.12989/sss.2012.10.3.299
  5. Cassidy, I. (2012), "Control of vibratory energy harvesters in the presence of nonlinearities and power-flow constraints", PhD Dissertation, Duke University.
  6. Cassidy, I.L., Scruggs, J.T. and Behrens, S. (2011), "Design of electromagnetic energy harvesters for large-scale structural vibration applications", Proceedings of SPIE7977, San Diego, California.
  7. Chen, C. and Liao, W.H. (2012), "A self-sensing magnetorheological damper with power generation", Smart Mater. Struct., 21(2).
  8. Cho, S.W., Jung, H.J. and Lee, I.W. (2005), "Smart passive system based on magnetorheological damper", Smart Mater. Struct., 14(4).
  9. Choi, Y.T. and Wereley, N.M. (2009), "Self-powered magnetorheological dampers", J. Vib. Acoust., 131(4).
  10. Dyke, S.J., Spencer, B.F., Sain, M.K. and Carlson, J.D. (1996), "Modeling and control of magnetorheological dampers for seismic response reduction", Smart Mater. Struct., 5(5).
  11. Gonzalez-Buelga, A., Clare, L.R., Cammarano, A., Neild, S.A., Burrow, S.G. and Inman, D.J. (2014), "An optimised tuned mass damper/harvester device", Struct. Control Health Monit., 21(8), 1154-1169. https://doi.org/10.1002/stc.1639
  12. Gonzalez-Buelga, A., Clare, L.R., Neild, S.A., Burrow, S.G. and Inman, D.J. (2015), "An electromagnetic vibration absorber with harvesting and tuning capabilities", Struct. Control Health Monit., 22(11), 1359-1372. https://doi.org/10.1002/stc.1748
  13. Green, P.L., Papatheou, E. and Sims, N.D. (2013), "Energy harvesting from human motion and bridge vibrations: An evaluation of current nonlinear energy harvesting solutions", J. Intel. Mat. Syst. Str., 24(12), 1494-1505. https://doi.org/10.1177/1045389X12473379
  14. Huang, H., Sun, L. and Jiang, X. (2012), "Vibration mitigation of stay cable using optimally tuned MR damper", Smart Struct. Syst., 9(1), 35-53. https://doi.org/10.12989/sss.2012.9.1.035
  15. Hui, M.C.H., Larsen, A. and Xiang, H.F. (2009a), "Wind turbulence characteristics study at the Stonecutters Bridge site: Part I-Mean wind and turbulence intensities", J. Wind Eng. Ind. Aerod., 97(1), 22-36. https://doi.org/10.1016/j.jweia.2008.11.002
  16. Hui, M.C.H., Larsen, A. and Xiang, H.F. (2009b), "Wind turbulence characteristics study at the Stonecutters Bridge site: Part II: Wind power spectra, integral length scales and coherences", J. Wind Eng. Ind. Aerod., 97(1), 48-59. https://doi.org/10.1016/j.jweia.2008.11.003
  17. Irvine, H.M. (1981), Cable Structures, MIT Press, Cambridge, Massachusett, USA.
  18. Johnson, E.A., Baker, G.A., Spencer, B.F. and Fujino, Y. (2007), "Semiactive damping of stay cables", J. Eng. Mech. - ASCE, 133(1), 1-11. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:1(1)
  19. Jung, H.J., Kim, I.H. and Koo, J.H. (2011), "A multi-functional cable-damper system for vibration mitigation, tension estimation and energy harvesting", Smart Struct. Syst., 7(5), 379-392. https://doi.org/10.12989/sss.2011.7.5.379
  20. Kim, S.S. and Okada, Y. (2001), "Variable resistance type energy regenerative damper using pulse width modulated step-up chopper", J. Vib. Acoust., 124(1), 110-115.
  21. Kollmorgen (2016), "AKM Servomotor Selection Guide; Retrieved from www.kollmorgen.com/".
  22. Krenk, S. (2000), "Vibrations of a taut cable with an external damper", J. Appl. Mech., 67(4), 772-776. https://doi.org/10.1115/1.1322037
  23. Lefeuvre, E., Audigier, D., Richard, C. and Guyomar, D. (2007), "Buck-boost converter for sensorless power optimization of piezoelectric energy harvester", IEEE T. Power Electr., 22(5), 2018-2025. https://doi.org/10.1109/TPEL.2007.904230
  24. Li, Z., Zuo, L., Luhrs, G., Lin, L. and Qin, Y.X. (2013), "Electromagnetic energy-harvesting shock absorbers: design, modeling, and road tests", IEEE T. Veh. Technol., 62(3), 1065-1074. https://doi.org/10.1109/TVT.2012.2229308
  25. Main, J.A. and Jones, N.P. (2001), "Evaluation of viscous dampers for stay-cable vibration mitigation", J. Bridge Eng., 6(6), 385-397. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(385)
  26. Ottman, G.K., Hofmann, H.F. and Lesieutre, G.A. (2003), "Optimized piezoelectric energy harvesting circuit using stepdown converter in discontinuous conduction mode", IEEE T. Power Electr., 18(2), 696-703. https://doi.org/10.1109/TPEL.2003.809379
  27. Pacheco, B.M., Fujino, Y. and Sulekh, A. (1993), "Estimation curve for modal damping in stay cables with viscous damper", J. Struct. Eng. - ASCE, 119(6), 1961-1979. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1961)
  28. Pillay, P. and Krishnan, R. (1989), "Modeling, simulation, and analysis of permanent-magnet motor drives. I. The permanentmagnet synchronous motor drive", IEEE T. Ind. Appl., 25(2), 265-273. https://doi.org/10.1109/28.25541
  29. Roshan, Y.M., Maravandi, A. and Moallem, M. (2015), "Power electronics control of an energy regenerative mechatronic damper", IEEE T. Ind. Electron., 62(5), 3052-3060. https://doi.org/10.1109/TIE.2015.2392714
  30. Sarkar, P.K. (2015), Advanced Process Dynamics and Control, PHI Learning Private Limited.
  31. Scruggs, J.T. and Iwan, W.D. (2003), "Control of a civil structure using an electric machine with semiactive capability", J. Struct. Eng. - ASCE, 129(7): 951-959. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(951)
  32. Shen, W. and Zhu, S. (2015), "Harvesting energy via electromagnetic damper: Application to bridge stay cables", J. Intel. Mat. Syst. Str., 26(1), 3-19. https://doi.org/10.1177/1045389X13519003
  33. Shen, W., Zhu, S. and Xu, Y. (2012), "An experimental study on self-powered vibration control and monitoring system using electromagnetic TMD and wireless sensors", Sensor Actuat. - A: Physical, 180, 166-176. https://doi.org/10.1016/j.sna.2012.04.011
  34. Shen, W., Zhu, S., Zhu, H. and Xu, Y.I. (2016), "Electromagnetic energy harvesting from structural vibrations during earthquakes", Smart Struct. Syst., 18(3), 449-470. https://doi.org/10.12989/sss.2016.18.3.449
  35. Shi, D., Chen, L., Wang, R., Jiang, H. and Shen, Y. (2014), "Design and experiment study of a semi-active energyregenerative suspension system", Smart Mater. Struct., 24.
  36. Suda, Y., Nakadai, S. and Nakano, K. (1998), "Hybrid suspension system with skyhook control and energy regeneration (development of self-powered active suspension)", Vehicle Syst. Dyn., 29, 619-634. https://doi.org/10.1080/00423119808969590
  37. Takeya, K., Sasaki, E. and Kobayashi, Y. (2016), "Design and parametric study on energy harvesting from bridge vibration using tuned dual-mass damper systems", J. Sound Vib., 361, 50-65. https://doi.org/10.1016/j.jsv.2015.10.002
  38. Tang, X. and Zuo, L. (2012), "Simultaneous energy harvesting and vibration control of structures with tuned mass dampers", J. Intel. Mat. Syst. Str., 23(18), 2117-2127. https://doi.org/10.1177/1045389X12462644
  39. Tremblay, O. and Dessaint, L. (2009), "Experimental validation of a battery dynamic model for EV applications", World Electric J., 3, 289-298. https://doi.org/10.3390/wevj3020289
  40. von Karman, T. (1948), "Progress in the statistical theory of turbulence", Proceedings of the National Academy of Science.
  41. Yu, Z. and Xu, Y.L. (1998), "Mitigation of three-dimensinal vibration of inclined sag cable using discrete oil dampers - I. formulation", J. Sound Vib., 214(4), 659-673. https://doi.org/10.1006/jsvi.1998.1609
  42. Zhou, Q., Nielsen, S.R.K. and Qu, W.L. (2006), "Semi-active control of three-dimensional vibrations of an inclined sag cable with magnetorheological dampers", J. Sound Vib., 296(1), 1-22. https://doi.org/10.1016/j.jsv.2005.10.028
  43. Zhu, S., Shen, W. and Xu, Y. (2012), "Linear electromagnetic devices for vibration damping and energy harvesting: Modeling and testing", Eng. Struct., 34, 198-212. https://doi.org/10.1016/j.engstruct.2011.09.024
  44. Zuo, L. and Cui, W. (2013), "Dual-functional energy-harvesting and vibration control: electromagnetic resonant shunt series tuned mass dampers", J. Vib. Acoust., 135(5).
  45. Zuo, L. and Tang, X. (2013), "Large-scale vibration energy harvesting", J. Intel. Mat. Syst. Str., 24(11), 1405-1430. https://doi.org/10.1177/1045389X13486707

피인용 문헌

  1. Experimental characterization and performance improvement evaluation of an electromagnetic transducer utilizing a tuned inerter vol.26, pp.1, 2017, https://doi.org/10.1177/1077546319876396
  2. Characteristic Test and Electromagnetic Analysis of Regenerative Hybrid Electrodynamic Damper for Vibration Mitigation and Monitoring of Stay Cables vol.10, pp.17, 2017, https://doi.org/10.3390/app10176078
  3. Damping enhancement of the inerter on the viscous damper in mitigating cable vibrations vol.28, pp.1, 2017, https://doi.org/10.12989/sss.2021.28.1.089