DOI QR코드

DOI QR Code

Parametric study of pendulum type dynamic vibration absorber for controlling vibration of a two DOF structure

  • Bur, Mulyadi (Department of Mechanical Engineering, Faculty of Engineering, Andalas University) ;
  • Son, Lovely (Department of Mechanical Engineering, Faculty of Engineering, Andalas University) ;
  • Rusli, Meifal (Department of Mechanical Engineering, Faculty of Engineering, Andalas University) ;
  • Okuma, Masaaki (Department of Mechanical and Aerospace Engineering, Tokyo Institute of Technology)
  • Received : 2016.10.30
  • Accepted : 2017.06.10
  • Published : 2017.07.25

Abstract

Passive dynamic vibration absorbers (DVAs) are often used to suppress the excessive vibration of a large structure due to their simple construction and low maintenance cost compared to other vibration control techniques. A new type of passive DVA consists of two pendulums connected with spring and dashpot element is investigated. This research evaluated the performance of the DVA in reducing the vibration response of a two degree of freedom shear structure. A model for the two DOF vibration system with the absorber is developed. The nominal absorber parameters are calculated using a Genetic Algorithm(GA) procedure. A parametric study is performed to evaluate the effect of each absorber parameter on performance. The simulation results show that the optimum condition for the absorber frequencies and damping ratios is mainly affected by pendulum length, mass, and the damping coefficient of the pendulum's hinge joint. An experimental model validates the theoretical results. The simulation and experimental results show that the proposed technique is able be used as an effective alternative solution for reducing the vibration response of a multi degree of freedom vibration system.

Keywords

Acknowledgement

Supported by : Andalas University

References

  1. Bayramoglu, G., Ozgen, A. and Altinok, E.(2014), "Seismic performance evaluation and retrofitting with viscous fluid dampers of an existing bridge in Istanbul", Struct. Eng. Mech, 49(4), 463-477. https://doi.org/10.12989/sem.2014.49.4.463
  2. Farshidianfar, A. and Soheili, S. (2013), "ABC optimization of TMD parameters for tall buildings with soil structure interaction", Inter. Multi. Mech., 6(4), 339-356. https://doi.org/10.12989/imm.2013.6.4.339
  3. Fosdick, R. and Ketema, Y. (1998), "A thermoviscoelastic dynamic vibration absorber", J. Appl. Mech., 65(1), 17-24. https://doi.org/10.1115/1.2789023
  4. Gong, X., Peng, C., Xuan, S., Xu, Y. and Xu, Z. (2012), "A pendulum-like tuned vibration absorber and its application to a multi-mode system", J. Mech. Sci. Tech., 26(11), 3411-3422. https://doi.org/10.1007/s12206-012-0857-x
  5. Haupt, R.L. and Haupt, S.E. (2004), Practical Genetic Algorithm, John Willey & Sons, USA.
  6. Mizuno, T. and Araki, K. (1993), "Control system of a dynamic vibration absorber with an electromagnetic servomechanism", J. Mech. Syst. Sig. Proc., 7(4), 293-306. https://doi.org/10.1006/mssp.1993.1016
  7. Ni, P. (2014), "Seismic assessment and retrofitting of existing structure based on nonlinear static analysis", Struct. Eng. Mech., 49(5), 631-644. https://doi.org/10.12989/sem.2014.49.5.631
  8. Rusli, M., Bur. M. and Son, L. (2015), "Dynamic vibration absorber for squeal noise suppression in simple model structures", Int. J. Struct. Stab. Dyn., 15(5), 1450078. https://doi.org/10.1142/S0219455414500783
  9. Salazar, A.R., Beltran, F.V., Escobedo, D.D., Mora, E.B. and Barraza, A.L. (2016), "Combination rules and critical seismic response of steel buildings modeled as complex MDOF systems", Earthq. Struct., 10(1), 211-238. https://doi.org/10.12989/eas.2016.10.1.211
  10. Seto, K., Iwasaki, Y., Shimoda, I., Oda, S. and Watanabe, T. (2011), "Vibrataion control for house structures beyond 3 story using pendulum-type controller underground excitation like traffic vibrations or earthquakes", J. Syst. Des. Dyn., 5(5), 653-664. https://doi.org/10.1299/jsdd.5.653
  11. Shariatmadar, H. and Razavi, H.M. (2014), "Seismic control response of structures using an ATMD with fuzzy logic controller and PSO method", Struct. Eng. Mech., 51(4), 547-564. https://doi.org/10.12989/sem.2014.51.4.547
  12. Son, L., Bur, M. and Rusli, M.(2016b), "Response reduction of Two DOF shear structure using TMD and TLCD by considering absorber space limit and fluid motion", Appl. Mech. Mat., 836, 251-256.
  13. Son, L., Bur, M., Rusli, M. and Adriyan, A. (2016), "Design of double dynamic vibration absorbers for reduction of two DOF vibration system", Struct. Eng. Mech., 57(1), 161-178. https://doi.org/10.12989/sem.2016.57.1.161
  14. Wang, L., Liang, S., Song, J. and Wang, S. (2015), "Analysis of vortex induced vibration frequency of super tall building based on wind tunnel tests of MDOF aero-elastic model", Wind Struct., 21(5), 523-536. https://doi.org/10.12989/was.2015.21.5.523
  15. Xiang, P. and Nishitani, A. (2015), "Optimum design and application of non-traditional tuned mass damper toward seismic response control with experimental test verification", Earthq. Eng. Struct. D., 44(13), 2199-2220. https://doi.org/10.1002/eqe.2579
  16. Yamada, K. (2015), "Enhancing efficiency of piezoelectric element attached to beam using extended spacers", J. Sound Vib., 341(1), 31-52. https://doi.org/10.1016/j.jsv.2014.12.022
  17. Zhang, C., Zhou, Y., Weng, D.G., Lu, D.H. and Wu, C.X. (2015), "A methodology for design of metallic dampers in retrofit of earthquake-damaged frame", Struct. Eng. Mech., 56(4), 569-588. https://doi.org/10.12989/sem.2015.56.4.569
  18. Zhou, X., Lin, Y. and Gu, M. (2015), "Optimization of multiple tuned mass dampers for large-span roof structures subjected to wind loads", Wind Struct., 20(3), 363-388. https://doi.org/10.12989/was.2015.20.3.363