Membrane and Water Treatment

  • 제8권5호
  • /
  • Pages.423-435
  • /
  • 2017
  • /
  • 2005-8624(pISSN)
  • /
  • 2092-7037(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance and flow field assessment of settling tanks using experimental and CFD modeling

  • 투고 : 2017.01.18
  • 심사 : 2017.05.04
  • 발행 : 2017.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Settling Basins are one of the most important and popular methods for removal of suspended sediments irrigation and drainage networks or power canals taking off from an alluvial river and wastewater treatment plant. Improving the performance and so increasing sediment removal efficiency of settling basins by an alternative method is necessary. In the present work, the effect of baffle and its angle of attack with the flow (${\theta}$) on the sediment removal efficiency is investigated by conducting a series of experiments on a straight canal with 8 m length, 0.3 m width and 0.5 m height and 3 m length of basin equipped with an adjustable glass baffle. A numerical analysis has been carried out using ANSYS Fluent 3D software (a general purpose computational fluid dynamics simulation tool) for three Froude numbers from the experiments. The numerical and experimental results were found to match reasonably well.

키워드

참고문헌

  1. Ahmed, F.H., Kamel, A. and Abdel Jawad, S. (1996), "Experimental determination of the optimal location and contraction of sedimentation tank baffles", Water Air Soil Pollut., 92, 251-271.
  2. Bretscher, U., Krebs, P. and Hager, W.H. (1992), "Improvement of flow in final settling tanks", J. Environ. Eng., 118(3), 307-321. https://doi.org/10.1061/(ASCE)0733-9372(1992)118:3(307)
  3. Crosby, R.M. (1984), "Evaluation of the hydraulic characteristics of activated sludge secondary clarifiers", Environmental Protection Agency, Office of Research and Development, Washington, D.C. U.S Report EPA-600/2.
  4. Goula, A.M., Kostoglou, M., Karapantsios, T.D. and Zouboulis, A.I. (2007), "A CFD methodology for the design of sedimentation tanks in potable water treatment case study, the influence of a feed flow control baffle", Chem. Eng. J., 140, 110-121.
  5. Huggins, D.L., Piedrahita, R.H. and Rumsey, T. (2004), "Analysis of sediment transport modeling using computational fluid dynamics (CFD) for aquaculture raceways", Aquacult. Eng., 31, 277-293. https://doi.org/10.1016/j.aquaeng.2004.05.007
  6. Krebs, P., Vischer, D. and Gujer, W. (1992), "Improvement of secondary clarifiers efficiency by porous walls", Water Sci. Technol., 26, 5-6.
  7. Krebs, P. (1995), "Success and shortcomings of clarifier modeling", J. Water Sci. Technol., 31(2), 181-191.
  8. Krebs, P., Vischer, D. and Gujer, W. (1995), "Inlet-structure design for final clarifiers", J. Environ. Eng., ASCE, 121(8), 558-564. https://doi.org/10.1061/(ASCE)0733-9372(1995)121:8(558)
  9. McCorquodale, J.A. and Zhou, S. (1993), "Effects of hydraulic and solids loading on clarifier performance", J. Hydraul. Res., 31(4), 461-477. https://doi.org/10.1080/00221689309498870
  10. Mehdizadeh, A. and Firoozabadi, B. (2009), "Simulation of a density current turbulent flow employing different RANS models, a comparison study", Tran. B:Mech. Eng., 16(1), 53-63.
  11. RangaRaju, K.G., Kothyari, U.C., Srivastav, S. and Saxena, M. (1999), "Sediment removal efficiency of settling basins", J. Irrig. Drain. Eng., 125(5), 308-314. https://doi.org/10.1061/(ASCE)0733-9437(1999)125:5(308)
  12. Razmi, A.M., Firoozabadi, B. and Ahmadi, G. (2008), "Experimental and numerical approach to enlargement of performance of primary settling tanks", J. Appl. Fluid. Mech., 2(1), 1-13
  13. Razmi, A.M., Bakhtyar, R., Firoozabadi, B. and Barry, D.A. (2013), "Experiments and numerical modeling of baffle configuration effects on the performance of sedimentation tanks", Can. J. Civil Eng., 40(2), 140-150. https://doi.org/10.1139/cjce-2012-0176
  14. Rodi,W. (1980), "Turbulence models and their application in hydraulics", IAHR, Delft, the Netherlands.
  15. Rostami, F., Shahrokhi, M., Md Said, M.A., Abdullah, R. and Syafalni, S. (2011), "Numerical modeling on inlet aperture effects on flow pattern in primary settling tanks", Appl. Math. Model., 35(6), 3012-3020. https://doi.org/10.1016/j.apm.2010.12.007
  16. Shahrokhi, M., Rostami, F., Md Said, M.A., Sabbagh-Yazdi, S. and Syafalni, S. (2011a), "The effect of number of baffles on the improvement efficiency of primary sedimentation tanks", Appl. Math. Model., 36(8), 3725-3735. https://doi.org/10.1016/j.apm.2011.11.001
  17. Shahrokhi, M., Rostami, F., Md Said, M.A., Sabbagh-Yazdi, S., Syafalni, S. and Abdullah, R. (2012), "The effect of baffle angle on primary sedimentation tank efficiency", Can. J. Civil Eng., 39(3), 293-303. https://doi.org/10.1139/l2012-002
  18. Shahrokhi, M., Rostami, F., Md Said, M.A. and Syafalni, S. (2011b), "Numerical modeling of the effect of the baffle location on the flow field, sediment concentration and efficiency of the rectangular primary sedimentation tanks", World Appl. Sci. J., 15 (9), 1296-1309.
  19. Shahrokhi, M., Rostami, F., Md Said, M.A. and Syafalni, S. (2011c), "Numerical simulation of influence of inlet configuration on flow pattern in primary rectangular sedimentation tanks", World Appl. Sci. J., 15(7), 1024-1031.
  20. Shamloo, H. and Bayat, A.R. (2008), "Evaluation different turbulent models in hydraulic design of Primary Sedimentation Tank", 4 National Congress of Civil Engineering, Tehran. (in Persian)
  21. Shetab-Boushehri, S.N., Mousavi, S.F. and Shetab-Boushehri, S.B. (2010), "Design of settling basins in irrigation network using simulation and mathematical programming", J. Irrig. Drain. Eng., 136(2), 99-106. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000148
  22. Tamayol, A. (2005), "Effects of baffle configurations on the performance of settling tanks", MS Thesis, Sharif Univ. of Technology, Iran.
  23. Tamayol, A., Nazari, M., Firoozabadi, B. and Nabovati, A. (2004), "Effects of turbulent models and baffle position on Hydrodynamics of settling tanks", Int. Mech. Eng. Con., 4, 12-22.
  24. Tamayol, A. and Firoozabadi, B. (2006), "Effects of turbulent models and baffle position on the hydrodynamics of settling tanks", Scientia Iranica, 13)3), 255-260.
  25. Tamayol, A., Firoozabadi, B. and Ashjari, M.A. (2010), "Hydrodynamics of secondary settling tanks and increasing their performance using baffles", J. Environ. Eng., 136, 32-39. https://doi.org/10.1061/(ASCE)EE.1943-7870.0000126
  26. Vanoni, V.A. (1975), "Sedimentation engineering. ASCE manuals and reports on engineering practice", ASCE, 5, 582-587.
  27. Vittal, N. and Raghav, M.S. (1997), "Design of single-chamber settling basins", J. Hydraul. Eng., 123(5), 469-471. https://doi.org/10.1061/(ASCE)0733-9429(1997)123:5(469)
  28. Wills, R.F. and Davis, C. (1962), "Flow patterns in a rectangular sewage sedimentation tank", 1st Int Conference on Water Pollution Research.
  29. Xanthos, S., Gong, M., Ramalingam, K., Fillos, J., Deur, A., Beckmann, K. and McCorquodale, J.A. (2010), "Performance assessment of secondary settling tanks using CFD modeling", Water Res. Manage., 25(4), 1169-1182.
  30. Zhou, S., McCorquodale, J. and Vitasovic, Z. (1992), "Influences of density on circular clarifiers with baffles", J. Environ. Eng., ASCE, 118(6), 829-847. https://doi.org/10.1061/(ASCE)0733-9372(1992)118:6(829)