Advances in materials Research

  • 제6권2호
  • /
  • Pages.155-168
  • /
  • 2017
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Aluminum and E-glass epoxy plates behavior subjected to shock loading

  • Muhit, Imrose B. (School of Civil and Environmental Engineering, Chung-Ang University) ;
  • Sakib, Mostofa N. (Institute of Water and Flood Management, Bangladesh University of Engineering and Technology) ;
  • Ahmed, Sheikh S. (Department of Civil Engineering, University of Asia Pacific)
  • 투고 : 2017.03.17
  • 심사 : 2017.06.26
  • 발행 : 2017.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The terrorist attacks and dangers by bomb blast have turned into an emerging issue throughout the world and the protection of the people and structures against terrorist acts depends on the prediction of the response of structures under blast and shock load. In this paper, behavior of aluminum and unidirectionally reinforced E-Glass Epoxy composite plates with and without focal circular holes subjected to shock loading has been identified. For isotropic and orthotropic plates (with and without holes) the classical normal mode approach has been utilized as a part of the processing of theoretical results. To obtain the accurate results, convergence of the results was considered and a number of modes were selected for plate with and without hole individually. Using a shock tube as a loading device, tests have been conducted to composite plates to verify the theoretical results. Moreover, peak dynamic strains, investigated by experiments are also compared with the theoretical values and deviation of the results are discussed accordingly. The strain-time histories are likewise indicated for a specific gauge area for aluminum and composite plates. Comparison of dynamic-amplification factors between the isotropic and the orthotropic plates with and without hole has been discussed.

키워드

참고문헌

  1. Abdelhak, Z., Hadji, L., Daouadji, T. and Bedia, E. (2015), "Thermal buckling of functionally graded plates using an-order four variable refined theory", Adv. Mater. Res., 4(1), 31-44. https://doi.org/10.12989/amr.2015.4.1.31
  2. Ancy, A. and Parvathy, U. (2016), "Thermal buckling behaviour of functionally graded plates", Appl. Mech. Mater., 857, 279-284. https://doi.org/10.4028/www.scientific.net/AMM.857.279
  3. Aslan, Z., Karakuzu, R. and Sayman, O. (2002), "Dynamic characteristics of laminated woven E-glassepoxy composite plates subjected to low velocity heavy mass impact", J. Compos. Mater., 36(21), 2421-2442. https://doi.org/10.1177/0021998302036021672
  4. Bathe, K.J. and Wilson, E.L. (1986), Numerical Methods in Finite Element Analysis, Englewood Cliffs, Prentice-Hall.
  5. Carvalho, A. and Soares, C.G. (1996), "Dynamic response of rectangular plates of composite materials subjected to impact loads", Compos. Struct., 34(1), 55-63. https://doi.org/10.1016/0263-8223(95)00131-X
  6. Daniel, A.J. and Dubey, R.N. (2015), "Finite element simulation of earthquake resistant brick masonry building under shock loading", Adv. Struct. Eng., 1027-1038.
  7. Daouadji, T.H. and Adim, B. (2016), "An analytical approach for buckling of functionally graded plates", Adv. Mater. Res., 5(3), 141-169. https://doi.org/10.12989/amr.2016.5.3.141
  8. Daouadji, T.H., Benferhat, R. and Adim, B. (2016), "A novel higher order shear deformation theory based on the neutral surface concept of FGM plate under transverse load", Adv. Mater. Res., 5(2), 107-120. https://doi.org/10.12989/amr.2016.5.2.107
  9. Dewey, J.M. (2001), Expanding Spherical Shocks (Blast Waves), Handbook of Shock Waves, Academic Press, Burlington, 441-481.
  10. Dhiraj, V.S., Jadvani, N. and Kalita, K. (2016), "Stress and strain analysis of functionally graded plates with circular cutout", Adv. Mater. Res., 5(2), 81-92. https://doi.org/10.12989/amr.2016.5.2.081
  11. Ebrahimi, F., Ehyaei, J. and Babaei, R. (2016), "Thermal buckling of FGM nanoplates subjected to linear and nonlinear varying loads on Pasternak foundation", Adv. Mater. Res., 5(4), 245-261. https://doi.org/10.12989/amr.2016.5.4.245
  12. Gupta, A.D., Gregory, F.H., Bitting, R.L. and Bhattacharya, S. (1987), "Dynamic analysis of an explosively loaded hinged rectangular plate", Comput. Struct., 26(1-2), 339-344. https://doi.org/10.1016/0045-7949(87)90263-X
  13. Hebali, H., Bakora, A., Tounsi, A. and Kaci, A. (2016), "A novel four variable refined plate theory for bending, buckling, and vibration of functionally graded plates", Steel Compos. Struct., 22(3), 473-495. https://doi.org/10.12989/scs.2016.22.3.473
  14. Hosseini, S.A., Abolbashari, M.H. and Hosseini, S.M. (2016), "Generalized coupled non-Fickian/non-Fourierian diffusion-thermoelasticity analysis subjected to shock loading using analytical method", Struct. Eng. Mech., 60(3), 529-545. https://doi.org/10.12989/sem.2016.60.3.529
  15. Houlston, R. and Desrochers, C.G. (1987), "Nonlinear structural response of ship panels subjected to air blast loading", Comput. Struct., 26(1-2), 1-15. https://doi.org/10.1016/0045-7949(87)90232-X
  16. Houlston, R., Slater, J.E., Pegg, N. and Desrochers, C.G. (1985), "On analysis of structural response of ship panels subjected to air blast loading", Comput. Struct., 21(1-2), 273-289. https://doi.org/10.1016/0045-7949(85)90250-0
  17. Kalnins, A. and Dym, C.L. (1976), Vibration: Beams, Plates, and Shells, Stroudsburg, Dowden, Hutchinson & Ross.
  18. Kazanci, Z. and Mecitoglu, Z. (2006), "Nonlinear damped vibrations of a laminated composite plate subjected to blast load", AIAA J., 44(9), 2002-2008. https://doi.org/10.2514/1.17620
  19. Kumari, E. and Singha, M. (2017), "Nonlinear response of laminated panels under blast load", Proc. Eng., 173, 539-546. https://doi.org/10.1016/j.proeng.2016.12.086
  20. Librescu, L. and Nosier, A. (1990), "Response of laminated composite flat panels to sonic boom and explosive blast loadings" AIAA J., 28(2), 345-352. https://doi.org/10.2514/3.10395
  21. Librescu, L., Oh, S.Y. and Hohe, J. (2004), "Linear and non-linear dynamic response of sandwich panels to blast loading", Compos. Part B: Eng., 35(6-8), 673-683. https://doi.org/10.1016/j.compositesb.2003.07.003
  22. Liou, W., Tseng, C. and Chao, L. (1996), "Stress analysis of laminated E-glass epoxy composite plates subject to impact dynamic loading", Comput. Struct., 61(1), 1-11. https://doi.org/10.1016/0045-7949(96)00020-X
  23. Louca, L.A., Pan, Y.G. and Harding, J.E. (1998), "Response of stiffened and unstiffened plates subjected to blast loading", Eng. Struct., 20(12), 1079-1086. https://doi.org/10.1016/S0141-0296(97)00204-6
  24. Mazek, S.A. and Wahab, M.M. (2015), "Impact of composite materials on buried structures performance against blast wave", Struct. Eng. Mech., 53(3), 589-605. https://doi.org/10.12989/sem.2015.53.3.589
  25. Moradipour, P., Chan, T.H. and Gallag, C. (2015), "An improved modal strain energy method for structural damage detection, 2D simulation", Struct. Eng. Mech., 54(1), 105-119. https://doi.org/10.12989/sem.2015.54.1.105
  26. Needham, C.E. (2012), Blast Waves, Springer-Verlag Berlin and Heidelberg GmbH & Co. KG, Berlin, Germany.
  27. Olson, M.D. (1991), "Efficient modelling of blast loaded stiffened plate and cylindrical shell structures", Comput. Struct., 40(5), 1139-1149. https://doi.org/10.1016/0045-7949(91)90385-Y
  28. Pack, D.C. (1957), "The reflection and transmission of shock waves I: The reflection of a detonation wave at a boundary", Philosoph. Mag., 2(14), 182-188. https://doi.org/10.1080/14786435708243807
  29. Rajamani, A. and Prabhakaran, R. (1977a), "Dynamic response of composite plates with cut-outs, part I: Simply-supported plates", J. Sound Vibr., 54(4), 549-564. https://doi.org/10.1016/0022-460X(77)90612-5
  30. Rajamani, A. and Prabhakaran, R. (1977b), "Dynamic response of composite plates with cut-outs, part II: Clamped-clamped plates", J. Sound Vibr., 54(4), 565-576. https://doi.org/10.1016/0022-460X(77)90613-7
  31. Rajamani, A. and Prabhakaran, R. (1980), "Response of composite plates to blast loading", Exper. Mech., 20(7), 245-250. https://doi.org/10.1007/BF02327708
  32. Ramajeyathilagam, K., Vendhan, C.P. and Rao, V.B. (2000), "Non-linear transient dynamic response of rectangular plates under shock loading", J. Imp. Eng., 24(10), 999-1015. https://doi.org/10.1016/S0734-743X(00)00018-X
  33. Reddy, J.N. (1983), "Geometrically nonlinear transient analysis of laminated composite plates", AIAA J., 21(4), 621-629. https://doi.org/10.2514/3.8122
  34. Redekop, D. (1994), "Dynamic response of a toroidal shell panel to blast loading", Comput. Struct., 51(3), 235-239. https://doi.org/10.1016/0045-7949(94)90331-X
  35. Redekop, D. and Azar, P. (1991), "Dynamic response of a cylindrical shell panel to explosive loading", J. Vibr. Acoust., 113(3), 273-278. https://doi.org/10.1115/1.2930181
  36. Shabana, A.A. (1996), Forced Vibration, Theory of Vibration: An Introduction, Springer, New York, U.S.A.
  37. Shim, C., Lee, P. and Chang, S. (2001), "Design of shear connection in composite steel and concrete bridges with precast decks", J. Constr. Steel Res., 57(3), 203-219. https://doi.org/10.1016/S0143-974X(00)00018-3
  38. Shim, C., Yun, N., Yu, R. and Byun, D. (2012), "Mitigation of blast effects on protective structures by aluminum foam panels", Metal., 2(2), 170-177. https://doi.org/10.3390/met2020170
  39. Turkmen, H.S. (1998), "Dynamic response of laminated composite panels subjected to blast loading", Ph.D. Dissertation, Istanbul Technical University.
  40. Turkmen, H.S. (2002), "Structural response of laminated composite shells subjected to blast loading: Comparison of experimental and theoretical methods", J. Sound Vibr., 249(4), 663-678. https://doi.org/10.1006/jsvi.2001.3861
  41. UFC (2008), Structures to Resist the Effects of Accidental Explosions, Unified Facilities Criteria, United States Army, US Government Printing Office, Washington, U.S.A.
  42. Upadhyay, A.K., Pandey, R. and Shukla, K.K. (2011), "Nonlinear dynamic response of laminated composite plates subjected to pulse loading", Commun. Nonlin. Sci. Numer. Simulat., 16(11), 4530-4544. https://doi.org/10.1016/j.cnsns.2011.03.024
  43. Uyaner, M. and Kara, M. (2007), "Dynamic response of laminated composites subjected to low-velocity impact", J. Compos. Mater., 41(24), 2877-2896. https://doi.org/10.1177/0021998307079971
  44. Wang, Y., Xu, C., Wan, Y., Li, J., Yu, H. and Ren, L. (2016), "A modal approach for the efficient analysis of a bionic multi-layer sound absorption structure", Steel Compos. Struct., 21(2), 249-266. https://doi.org/10.12989/scs.2016.21.2.249
  45. Wiernicki, C.J., Liem, F., Woods, G.D. and Furio, A.J. (1991), "Structural analysis methods for lightweight metallic corrugated core sandwich panels subjected to blast loads", Naval Eng. J., 103(3), 192-202. https://doi.org/10.1111/j.1559-3584.1991.tb00949.x
  46. Yun, N.R., Park, S.D., Muhit, I.B. and Shim, C.S. (2014), "Impact tests on aluminum foams", Proceedings of the 4th International Technical Conference, Seoul, Korea, November.