DOI QR코드

DOI QR Code

합성수지의 보강비율에 따른 목재의 휨 보강 성능에 관한 연구

A Study on the Flexural Capacity of Wooden Member According to the Reinforcement Ratio of Synthetic Resin

  • 강호근 (경남도립거창대학교 건축.인테리어과)
  • Kang, Ho-Geun (Dept. of Architecture & Interior, University of Gyeong-nam Geochang)
  • 투고 : 2017.08.03
  • 심사 : 2017.08.07
  • 발행 : 2017.09.15

초록

Most of the cultural assets in Korea are wooden structures. Due to the material characteristics of wood, the preservation of traditional wooden structure is impossible by simple maintenance. Damaged member is replaced with new member or completely dissolve and restore them. But member has a cultural value, so that it is impossible to arbitrarily replace each member. Although the preservation treatment method using synthetic resin is emphasized, there is no exact standard for proper reinforcement ratio. This paper is experimental study for reinforcement ratio of wooden flexural member with synthetic resins, Reinforced ratio on section area of flexural member. As a result, synthetic resin reinforcement are selected as experimental variables by proper ratio enhanced flexural capacity of reinforced wooden member than new wooden member.

키워드

참고문헌

  1. Kim, Wang-Jik, Cho, Hyun-Jung, "A study on the Conservation of Historic Timber Architecture by Synthetic Resin", Journal of Architectural History, Vol.15, No.1, 2006, pp.43-57
  2. Lee, Jong-Kyun, "Experimental Study on the Flexural Behavior of Deteriorated Wooden Beams Reinforced with Synthetic Resin", M.S Thesis, Yeungnam University, 2011, pp. 136
  3. Yu, Tae-Jung, Kim, Byung-Ho, "Reparing Measures and Methods of Dilapidated Wooden Buildings, Architectural Institute of Korea", Vol.36, No.4, 1992, pp. 46-47
  4. Lee, Jong-Kyun, Park, Sung-Moo, "A study on the Flexural Capacity of Circular Section Wood using Synthetic Resins", Architectural Institute of Korea, Vol.26, No.8, 2009, pp. 49-50
  5. Lee, Seung-Jung, "A Study on Structural Flexural Strengthening of Traditional Wooden Architecture, Graduate School of Industry", Chosun University, 2008, pp. 36-37
  6. Lee, Hwa-Hyung, Yeo, Hwan-Myeong et al, Report Wood Physical and Mechanical, Hyangmunsa, 2008, pp.20, pp293, pp.296