Steel and Composite Structures

  • 제25권1호
  • /
  • Pages.105-116
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Ant colony optimization for dynamic stability of laminated composite plates

  • Shafei, Erfan (Faculty of Civil Engineering, Urmia University of Technology) ;
  • Shirzad, Akbar (Faculty of Civil Engineering, Urmia University of Technology)
  • 투고 : 2016.11.04
  • 심사 : 2017.06.18
  • 발행 : 2017.09.20
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the dynamic stability study of laminated composite plates with different force combinations and aspect ratios. Optimum non-diverging stacking is obtained for certain loading combination and aspect ratio. In addition, the stability force is maximized for a definite operating frequency. A dynamic version of the principle of virtual work for laminated composites is used to obtain force-frequency relation. Since dynamic stiffness governs the divergence or flutter, an efficient optimization method is necessary for the response functional and the relevant constraints. In this way, a model based on the ant colony optimization (ACO) algorithm is proposed to search for the proper stacking. The ACO algorithm is used since it treats with large number of dynamic stability parameters. Governing equations are formulated using classic laminate theory (CLT) and von-Karman plate technique. Load-frequency relations are explicitly obtained for fundamental and secondary flutter modes of simply supported composite plate with arbitrary aspect ratio, stacking and boundary load, which are used in optimization process. Obtained results are compared with the finite element method results for validity and accuracy convince. Results revealed that the optimum stacking with stable dynamic response and maximum critical load is in angle-ply mode with almost near-unidirectional fiber orientations for fundamental flutter mode. In addition, short plates behave better than long plates in combined axial-shear load case regarding stable oscillation. The interaction of uniaxial and shear forces intensifies the instability in long plates than short ones which needs low-angle layup orientations to provide required dynamic stiffness. However, a combination of angle-ply and cross-ply stacking with a near-square aspect ratio is appropriate for the composite plate regarding secondary flutter mode.

키워드

참고문헌

  1. Abaqus Inc. (2007), ABAQUS 6.7 User's Manual; Simulia, Johnston, RI, USA.
  2. Awad, Z.K., Aravinthan, T., Zhuge, Y. and Gonzalez, F. (2012), "A review of optimization techniques used in the design of fiber composite structures for civil engineering applications", Mater. Des., 33, 534-544. https://doi.org/10.1016/j.matdes.2011.04.061
  3. Aydin, L., Aydin, O., Artem, H.S. and Mert, A. (2016), "Design of dimensionally stable composites using efficient global optimization method", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 1464420716664921.
  4. Aymerich, F. and Serra, M. (2008), "Optimization of laminate stacking sequence for maximum buckling load using the ant colony optimization (ACO) metaheuristic", Compos. Part A: Appl. Sci. Manuf., 39(2), 262-272. https://doi.org/10.1016/j.compositesa.2007.10.011
  5. Biswal, M., Sahu, S.K. and Asha, A.V. (2016), "Vibration of composite cylindrical shallow shells subjected to hygrothermal loading-experimental and numerical results", Compos. Part B: Eng., 98, 108-119. https://doi.org/10.1016/j.compositesb.2016.05.037
  6. Chen, C.S., Tsai, T.C., Chen, W.R. and Wei, C.L. (2013), "Dynamic stability analysis of laminated composite plates in thermal environments", Steel Compos. Struct., Int. J., 15(1), 57-79. https://doi.org/10.12989/scs.2013.15.1.57
  7. Debowski, D., Magnucki, K. and Malinowski, M. (2010), "Dynamic stability of a metal foam rectangular plate", Steel Compos. Struct., Int. J., 10(2), 151-168. https://doi.org/10.12989/scs.2010.10.2.151
  8. Dey, S., Mukhopadhyay, T. and Adhikari, S. (2015), "Stochastic free vibration analysis of angle-ply composite plates-a RSHDMR approach", Compos. Struct., 122, 526-536. https://doi.org/10.1016/j.compstruct.2014.09.057
  9. Ehsani, A. and Rezaeepazhand, J. (2016), "Stacking sequence optimization of laminated composite grid plates for maximum buckling load using genetic algorithm", Int. J. Mech. Sci., 119, 97-106. https://doi.org/10.1016/j.ijmecsci.2016.09.028
  10. Fukuchi, N. and Tanaka, T. (2006), "Non-periodic motions and fractals of a circular arch under follower forces with small disturbances", Steel Compos. Struct., Int. J., 6(2), 87-101. https://doi.org/10.12989/scs.2006.6.2.087
  11. Guimaraes, T.A., Castro, S.G., Rade, D.A. and Cesnik, C.E. (2017), "Panel flutter analysis and optimization of composite tow steered plates", Proceedings of the 58th AIAA/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conference, Grapevine, TX, USA, January, 1118.
  12. Hajianmaleki, M. and Qatu, M.S. (2013), "Vibrations of straight and curved composite beams: A review", Compos. Struct., 100, 218-232. https://doi.org/10.1016/j.compstruct.2013.01.001
  13. Ho-Huu, V., Do-Thi, T.D., Dang-Trung, H., Vo-Duy, T. and Nguyen-Thoi, T. (2016), "Optimization of laminated composite plates for maximizing buckling load using improved differential evolution and smoothed finite element method", Compos. Struct., 146, 132-147. https://doi.org/10.1016/j.compstruct.2016.03.016
  14. Hu, N. and Fish, J. (2016), "Enhanced ant colony optimization for multiscale problems", Computat. Mech., 57(3), 447-463. https://doi.org/10.1007/s00466-015-1245-z
  15. Hu, X.B., Cui, X.Y., Liang, Z.M. and Li, G.Y. (2017), "The performance prediction and optimization of the fiber-reinforced composite structure with uncertain parameters", Compos. Struct., 164, 207-218. https://doi.org/10.1016/j.compstruct.2016.12.074
  16. Kaveh, A. and Bakhshpoori, T. (2015), "Subspace search mechanism and cuckoo search algorithm for size optimization of space trusses", Steel Compos. Struct., Int. J., 18(2), 289-303. https://doi.org/10.12989/scs.2015.18.2.289
  17. Krishnamurthy, T. (2010), "Frequencies and flutter speed estimation for damaged aircraft wing using scaled equivalent plate analysis", Proceedings of the 51st AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials Conference 18th AIAA/ASME/AHS Adaptive Structures Conference 12th (p. 2769), Orlando, FL, USA, April.
  18. Kurpa, L., Mazur, O. and Tkachenko, V. (2013), "Dynamical stability and parametrical vibrations of the laminated plates with complex shape", Latin Am. J. Solids Struct., 10(1), 175-188. https://doi.org/10.1590/S1679-78252013000100017
  19. Lecheb, S., Nour, A., Chellil, A., Mechakra, H., Ghanem, H. and Kebir, H. (2015), "Dynamic prediction fatigue life of composite wind turbine blade", Steel Compos. Struct., Int. J., 18(3), 673691.
  20. Librescu, L. and Thangjitham, S. (1991), Analytical studies on static aeroelastic behavior of forward-swept composite wing structures", J. Aircraft, 28(2), 151-157. https://doi.org/10.2514/3.46004
  21. Maalawi, K.Y. (2017), "Dynamic optimization of functionally graded thin-walled box beams", Int. J. Struct. Stabil. Dyn., 1750109. https://doi.org/10.1142/S0219455417501097
  22. Mason, B., Stroud, W., Krishnamurthy, T., Spain, C. and Naser, A. (2005), "Probabilistic design of a wind tunnel model to match the response of a full-scale aircraft", Proceedings of the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Austin, TX, USA, April, 2185.
  23. Mo, Y., Ge, D. and He, B. (2016), "Experiment and optimization of the hat-stringer-stiffened composite panels under axial compression", Compos. Part B: Eng., 84, 285-293. https://doi.org/10.1016/j.compositesb.2015.08.039
  24. Najafov, A.M., Sofiyev, A.H., Hui, D., Karaca, Z., Kalpakci, V. and Ozcelik, M. (2014), "Stability of EG cylindrical shells with shear stresses on a Pasternak foundation", Steel Compos. Struct., Int. J., 17, 453-470. https://doi.org/10.12989/scs.2014.17.4.453
  25. Phan, D.T., Lim, J.B., Tanyimboh, T.T. and Sha, W. (2012), "An efficient genetic algorithm for the design optimization of coldformed steel portal frame buildings", Ph.D. Thesis; Michigan State University, East Lansing, MI, USA.
  26. Roque, C.M.C. and Martins, P.A.L.S. (2017), "Maximization of fundamental frequency of layered composites using differential evolution optimization", Compos. Struct. DOI: j.compstruct.2017.01.037
  27. Sabuncu, M., Ozturk, H. and Yashar, A. (2016), "Static and dynamic stability of cracked multi-story steel frames", Struct. Eng. Mech., Int. J., 58(1), 103-119. https://doi.org/10.12989/sem.2016.58.1.103
  28. Shafei, E. and Kabir, M.Z. (2011), "Dynamic Stability Optimization of Laminated Composite Plates under Combined Boundary Loading", App. Compos. Mater., 18(6), 539-557. https://doi.org/10.1007/s10443-011-9222-y
  29. Sofiyev, A.H. and Kuruoglu, N. (2015), "Buckling of nonhomogeneous orthotropic conical shells subjected to combined load", Steel Compos. Struct., Int. J., 19(1), 1-19. https://doi.org/10.12989/scs.2015.19.1.001
  30. Sreehari, V.M. and Maiti, D.K. (2016), "Buckling load enhancement of damaged composite plates under hygrothermal environment using unified particle swarm optimization", Struct. Multidiscipl. Optimiz., 55(2), 437-447.
  31. Stutzle, T. and Hoos, H.H. (2000), "MAX-MIN ant system", Future Gener. Comput. Syst., 16(8), 889-914. https://doi.org/10.1016/S0167-739X(00)00043-1
  32. The Math Works, Inc. (2005), MATLAB 7.04 User's Manual; Mathworks, Natick, MA, USA.
  33. Wang, W., Guo, S., Chang, N. and Yang, W. (2010), "Optimum buckling design of composite stiffened panels using ant colony algorithm", Compos. Struct., 92(3), 712-719. https://doi.org/10.1016/j.compstruct.2009.09.018
  34. Wang, H., Chen, C.S. and Fung, C.P. (2013), "Hygrothermal effects on dynamic instability of a laminated plate under an arbitrary pulsating load", Struct. Eng. Mech., Int. J., 48(1), 103124.
  35. Yeh, J.Y. (2014), "Axisymmetric dynamic instability of polar orthotropic sandwich annular plate with ER damping treatment", Smart Struct. Syst., Int. J., 13(1), 25-39. https://doi.org/10.12989/sss.2014.13.1.025
  36. Zhang, X.J. (2010), "Study of structural parameters on the aerodynamic stability of three-tower suspension bridge", Wind Struct., Int. J., 13(5), 471-485. https://doi.org/10.12989/was.2010.13.5.471