DOI QR코드

DOI QR Code

열차 차상 통신용 소프트웨어의 사전 위험원 분석 연구

Preliminary Hazard Analysis for Communication Software in Train Communication Network

  • 투고 : 2016.11.16
  • 심사 : 2017.08.08
  • 발행 : 2017.09.01

초록

To guarantee safety and reliability, RAMS(Reliability Availability Maintainability and Safety) activity for a communication software in train communication network is studied. In this paper, preliminary hazard analysis in RAMS activities is studied for the communication software. Preliminary hazard analysis is done through library for communication software that the specification is defined by IEC 61375. The hazards are defined, then causes and consequence for each hazard are defined. The total 36 preliminary hazards are classified. For high severity hazards are changed to acceptable level by upgrading of system requirement specification.

키워드

참고문헌

  1. IEC, "IEC 61375-1: Electronic railway equipment - Train communication network(TCN) - Part 1: General architecture," 2012.
  2. IEC, "IEC 61375-2-3: Railway Applications - Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile," 2015.
  3. EN50126, "Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety(RAMS)," 1999.
  4. EN50128, "Railway applications - Communication, signaling and processing systems - Software for railway control and protection systems," 2011.
  5. D. H. Ahn, S. Han, K. K. Shin, J. J. Kim, "Introduction of certify process for TMS SIL#2 system," Proceeding of the Korean Society for Railway, pp. 848-856, 2014.
  6. K. Li, X. Yao, D. C. Chen, L. Yuan, D. Zhou, "HAZOP Study on the CTCS-3 Onboard System," IEEE Transaction on Intelligent Transportation Systems, accepted for inclusion in a future issue, 2014.
  7. B. K. Cho, K. J. Park, S. W. Lim, G. H. Cha, K. J. Oh, "Preliminary Hazard Analysis for Near Surface Transit Signal System," The Transactions of the Korean Institute of Electrical Engineers, Vol. 64P, No. 3, pp. 97-103, 2015
  8. T. W. Gu, "A novel approach supporting evaluation of software Safety Integrity Level on embedded systems," Proceedings of Information Science and Service Science (NISS), 2011 5th International Conference on New Trends in, pp. 140-145, 2011.
  9. A. Ceccarelli, I. Majzik. D. Iovino, F. Caneschi, G. Pinter, A. Bondavalli, "A Resilient SIL2 Driver Machine Interface for Train Control Systems," Proceedings of Computer Systems, 2008. DepCos-RELCOMDEX '08. Third International Conference on, pp. 365-374, 2008.
  10. T. Fujiwara, J. M. Estevez, Y. Satoh, S. Yamada, "A calculation method for software safety integrity level," Proceedings of the 1st Workshop on Critical Automotive applications: Robustness & Safety, pp. 31-34, 2010.
  11. S. Connelly, H. Becht, "Developing a methodology for the use of COTS operating systems with safety-related software," ASSC '11 Proceedings of the Australian Systems Safety Conference - Vol. 133, pp. 27-36, 2011.
  12. J. D. Lawrence, "Software Safety Hazard Analysis," UCRL-ID-122514, 1995.