Composites Research

  • 제30권4호
  • /
  • Pages.254-260
  • /
  • 2017
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

이종소재인 CFRP와 알루미늄의 접착력 향상을 위한 Bead의 영향 평가

Evaluation on the Effect of Beads for Adhesive Improvement of CFRP and Aluminum

  • 투고 : 2017.07.13
  • 심사 : 2017.08.31
  • 발행 : 2017.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 알루미늄과 복합재료에 대한 이종소재 접합면의 성형안전성을 위해 일정한 두께를 확보할 수 있는 0.1 mm, 0.2 mm, 0.3 mm bead의 적용 방법과 물성변화에 대해 연구하였고, 이를 검증하기 위해 더블랩 시험과 FEM 시뮬레이션으로 접착제의 두께에 따라 미치는 영향을 평가하였다. 그 결과, 접착제에 bead의 양을 1% 이상 함량이 증가함에 따라 접착 소재의 강도가 높아지고 신율이 감소함을 확인하였고, bead의 크기가 커질수록, 강성은 낮아지고, 신율은 증가함을 확인하였다.

In this paper, we investigated the application method and properties of 0.1 mm, 0.2 mm and 0.3 mm beads, which can secure a certain thickness due to the molding stability of joint surfaces of different materials (aluminum and composite). In order to verify this, the influence was evaluated according to the thickness of the adhesive in the Double lap test and the FEM simulation. As a result, it was confirmed that as the content of the bead of the adhesive increased more than 1%, the strength of the adhesion increased and the elongation decreased. We confirmed as the size of the bead became larger, the rigidity became lower and the elongation increased.

키워드

참고문헌

  1. (Korean Journal) Deetz, J., "The Use of Wrought Magnesium in Bicycles", JOM Journal of the Minerals, Metals and Materials Society, Vol. 57, No. 5, 2005, pp. 50-53.
  2. (Korean Journal) Cicero, S., Lacalle, R., Cicero, R., Fernandez, D., and Mendez, D., "Analysis of The Cracking Causes in An Aluminum Alloy Bike Frame", Engineering Failure Analysis, Vol. 18, 2011, pp. 36-46. https://doi.org/10.1016/j.engfailanal.2010.08.001
  3. (Korean Journal) Ko, H.Y., Shin, K.B., and Kim, J.S., "A Study on Improving the Fatigue Life for a Woven Glass Fabric/Epoxy Laminate Composite Applied to Railway Vehicles", Transactions of the Korean Society of Mechanical Engineers A, Vol. 34, No. 2, 2010, pp. 203-209. https://doi.org/10.3795/KSME-A.2010.34.2.203
  4. (Korean Journal) Hong, S.W., Ahn, S.S., Koo, J.M., and Seok, C.S., "Analysis of Characteristics of CFRP Composites Exposed Under High-Temperature and High-Humidity Environment for a Long Period", Transactions of the Korean Society of Mechanical Engineers A, Vol. 36, No. 8, 2012, pp. 889-895. https://doi.org/10.3795/KSME-A.2012.36.8.889
  5. (International Journal) Zhang, K., Yang, Z., and Li, Y., "A Method for Predicting the Curing Residual Stress for CFRP/Al Adhesive Single-lap Joints", International Journal of Adhesion & Adhesives, Vol. 46, No. 1, 2013, pp. 7-13. https://doi.org/10.1016/j.ijadhadh.2013.05.010
  6. (Korean Journal) Park, S.-O., "Fatigue Crack Growth Properties of Epoxy Adhesives under Mode I Loading", Jounal of Korean Society of Mechanical Technology, Vol. 15, No. 1, 2013, pp. 5-13. https://doi.org/10.17958/ksmt.15.1.201302.5
  7. (Korean Journal) Lee, J.-H., and Cho, J.-U., "A Comparative Study of Fatigue Fracture Behavior on the Specimens of DCB and TDCB Aluminum Foams with Mode III Type", Jounal of Korean Society of Mechanical Technology, Vol. 18, No. 1, 2016, pp. 70-75. https://doi.org/10.17958/ksmt.18.1.201602.70
  8. (Korean Journal) Shon, M.-Y., "Evaluations of Lap Shear and Peel Strength for Epoxy and Polyurethane Adhesive Bonded Triplex Sheets at Cryogenic Temperatures", Composites Research, Vol. 24, No. 3, 2011, pp. 39-45. https://doi.org/10.7234/kscm.2011.24.3.039
  9. (Korean Journal) Kim, D., Kim, S., Park, Y.-I., Kim, Y.C., and Lim, C.-S., "The Physical Properties Analysis of Epoxy Resins Incorporated with Toughening Agents," Journal of Adhesion and Interface Vol. 16, No. 3, 2015, pp. 101-107. https://doi.org/10.17702/jai.2015.16.3.101
  10. (Korean Journal) Kwon, J.W., and Lee, D.G., "The Effects of Surface Roughness and Bond Thickness on the Fatigue Life of Adhesively Bonded Tubular Single Lap Joints", Journal of Mechanical Science and Technology, Composites Research, Vol. 24, No. 8, 2000, pp. 1968-1977.
  11. (Book) Federal Aviation Administration, "Methods of analysis and Failure Predictions for Adhesively Bonded Joints of Uniform and Varialbe Bondline Thickness", U.S. Department of Transportation, USA, 2005.
  12. (Korean Journal) Park, C.G., Choi, Y., Kang, B.Y., and Kim, E.G., "A Study on the Development of the Split-Type Carbon Composite Bicycle Frames", Journal of the Korean Society for Precision Engineering, Vol. 34, No. 2, 2017, pp. 139-143. https://doi.org/10.7736/KSPE.2017.34.2.139