DOI QR코드

DOI QR Code

A Study on the Characteristics of Solid-Fuel Combustion

고형연료의 배출특성 연구

  • Jang, Kee-Won (Air Pollution Engineering Research Division, National Institute of Environmental Research) ;
  • Heo, Sun-Hwa (Air Pollution Engineering Research Division, National Institute of Environmental Research) ;
  • Lim, Seung-Young (Air Pollution Engineering Research Division, National Institute of Environmental Research) ;
  • Kim, Dae-Gon (Air Pollution Engineering Research Division, National Institute of Environmental Research) ;
  • Jung, Yong-Won (Department of Environmental Engineering, Inha University) ;
  • Kang, Dae-Il (Air Pollution Engineering Research Division, National Institute of Environmental Research)
  • 장기원 (국립환경과학원 대기공학연구과) ;
  • 허선화 (국립환경과학원 대기공학연구과) ;
  • 임승영 (국립환경과학원 대기공학연구과) ;
  • 김대곤 (국립환경과학원 대기공학연구과) ;
  • 정용원 (인하대학교 환경공학과) ;
  • 강대일 (국립환경과학원 대기공학연구과)
  • Received : 2017.07.11
  • Accepted : 2017.08.22
  • Published : 2017.08.31

Abstract

In this study, we developed emission factors from solid-fuel fired combustors. In order to increase the reliability of emission factors, we conducted a joint research with the Institute of Health and Environment. As a result, PM average concentration was $8.19mg/m^3$. $SO_2$ and $NO_x$ were respectively 8.46 ppm, 50.64 ppm. Hazardous air pollutants such as Cr, Pb and Hg were detected in trace amounts continuously for 2 years in some solid-fuel fired combustors. The emission factors for the three kinds of PM, $SO_x$, $NO_x$ were developed based on the measurement data. For the PM emission factors, that of SRF was 15.93 g/kg and that of Bio-SRF was 14.18 g/kg. Compared with those of US. EPA, emission factors of this study showed the results of low values. $SO_x$ emission factors were 4.42 g/kg for SRF and 1.39 g/kg for Bio-SRF. $NO_x$ emission factors were 13.21 g/kg and 4.43 g/kg, respectively. Through the results of this study, we would support atmospheric administration policies such as the emission factor notification revision.

Keywords

References

  1. Kim, H.-C., R.-H. Kim, J.-H. Kim, S.-Y. Lim, D.-I. Kang, J.-H. Hong, and K.-W. Jang (2016) A Study on the Comparison of Measuring Methods and Development of Emission Factor on Mercury from Large-Scale Emission Source, Journal of Korean Society for Atmospheric Environment, 32(2), 184-192. (in Korean with English abstract) https://doi.org/10.5572/KOSAE.2016.32.2.184
  2. Kim, S.-K., K.-W. Jang, J.-H. Kim, C. Yoo, J.-H. Hong, and H.-C. Kim (2012) SRF Combustion Pollutants' Impact on Domestic Emissions Assessments, Journal of Korean Society for Atmospheric Environment, 28(6), 656-665. (in Korean with English abstract) https://doi.org/10.5572/KOSAE.2012.28.6.656
  3. Lee, D.-K., J.-S. Lee, H. Kwak, and S.-Y. Bae (2005) Combustion Characteristics of RDF, Journal of Korea Society of Waste Management, 22(1), 101-112. (in Korean with English abstract)
  4. MOE (2017) Enforcement rule of Clean Air Conservation Act, Attachment 10.
  5. MOTIE (2016) New and Renewable Energy Supply Statistics, 11-12.
  6. NIER (2010) A study of Emission Characteristics of Air Pollutants from Facilities using Reclaiming Fuel, NIER No. 2010-76-1251, 1-2, 23-26.
  7. NIER (2015a) Development of Air Air Pollutants Emission Factors for the Other Fuels (I), NIER-RP 2015-211, 20-21.
  8. NIER (2015b) Notification of Emission Factor on Emission Facilities, Notification No. 2015-9, Attachment 3.
  9. NIER (2016) Development of Air Air Pollutants Emission Factors for the Other Fuels (II), NIER-RP 2016-302, 1.
  10. U.S. EPA (1996) AP-42, Fifth Efition Compilation of Air Pollutant Emission Factors, Volume 1: Stationary Point and Area Sources - Chapter2 Solid Waste Disposal.