DOI QR코드

DOI QR Code

Radar Cross Section Reduction by Planar Array of Dielectric Barrier Discharge Plasma under Atmospheric Pressure

평면 배열 유전체 장벽 방전 플라즈마 발생기의 대기압에서의 레이다 단면적 감소 효과

  • Kim, Yuna (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Kim, Sangin (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Kim, Doo-Soo (Agency for Defense Development) ;
  • Lee, Yongshik (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Yook, Jong-Gwan (Department of Electrical and Electronic Engineering, Yonsei University)
  • Received : 2017.05.29
  • Accepted : 2017.08.11
  • Published : 2017.08.31

Abstract

The effect of plasma on mono-static radar cross section under atmospheric pressure is demonstrated when the dielectric barrier discharge actuator has plasma layer. The volume of plasma layer is increased by using planar array of electrodes. Because the incident wave has electric field which is perpendicular to the electrode array, the undesired effect on radar cross section caused by structure of plasma actuator is minimized. In experiments, mono-static radar cross section is measured at the frequencies from 2 GHz to 25 GHz. The generated plasma reduces the radar cross section at frequencies above 18 GHz, and the amount of reduction reaches to 8 dB in maximum. The reduction can be controlled by changing the peak-to-peak voltage from high voltage generator. The result shows the possibility of plasma as a flexible radar cross section controller.

큰 부피의 플라즈마를 발생시키기 위하여 플라즈마 층을 포함하는 유전체 장벽 방전 구조(dielectric barrier discharge)를 제안하고, 발생기 동작 유무에 따른 모노스태틱 레이다 단면적(mono-static radar cross section)을 측정함으로써 대기압 플라즈마가 전자기파에 미치는 영향을 분석하였다. 다수의 전극을 평면으로 평행 배열함으로써 플라즈마 층의 부피를 증가시켰으며, 전극 배열과 수직인 방향의 전기장을 포함하는 전자기파를 입사시킴으로써 발생기와의 원치 않는 커플링을 최소화 시켰다. 실험 결과, 모노스태틱 레이다 단면적을 2 GHz부터 25 GHz까지 측정하였을 때, K band에서 최대 8 dB까지 감소하는 것을 확인하였다. 또한, 고전압 발생기의 인가 전압을 최대 20 kV까지 변화시킴으로써 원하는 주파수에서 플라즈마로 인한 감소치를 유연하게 조절 가능함을 보였다.

Keywords

References

  1. W. Swarner, L. Peters Jr, "Radar cross sections of dielectric or plasma coated conducting spheres and circular cylinders", Antennas and Propagation, IEEE Transactions on, vol. 11, pp. 558-569, 1963. https://doi.org/10.1109/TAP.1963.1138087
  2. B. Chaudhury, S. Chaturvedi, "Comparison of wave propagation studies in plasmas using three-dimensional finitedifference time-domain and ray-tracing methods", Physics of Plasmas, vol. 13, issue 12, p. 123302, 2006. https://doi.org/10.1063/1.2397582
  3. 김유나, 오일영, 정인균, 홍용준, 육종관, "유체 모델을 이용한 유전체 장벽 방전 플라즈마와 전자기파 간의 시간 의존적 상호 작용 분석", 한국전자파학회논문지, 25(8), pp. 857-863, 2014년 8월. https://doi.org/10.5515/KJKIEES.2014.25.8.857
  4. X. He, J. Chen, R. Chu, Y. Chen, X. Zeng, T. Zhu, and X. Ni, "Experimental and numerical investigation on electromagnetic absorption and diffraction by the plasmacovered cavity", IEEE Trans. Plasma Sci., vol. 38, pp. 3342-3347, 2010. https://doi.org/10.1109/TPS.2010.2084596
  5. A. Srivastava, G. Prasad, P. Atrey, and V. Kumar, "Attenuation of microwaves propagating through parallel-plate helium glow discharge at atmospheric pressure", Journal of Applied Physics, vol. 103, issue 3, pp. 033302-033302-7, 2008. https://doi.org/10.1063/1.2838199
  6. A. Schutze, J. Y. Jeong, S. E. Babayan, J. Park, G. S. Selwyn, and R. F. Hicks, "The atmospheric-pressure plasma jet: A review and comparison to other plasma sources", Plasma Science, IEEE Transactions on, vol. 26, pp. 1685-1694, 1998. https://doi.org/10.1109/27.747887
  7. B. Dong, D. Hong, J. Bauchire, and J. Pouvesle, "Experimental study of a gas jet generated by an atmospheric microcavity discharge", Plasma Science, IEEE Transactions on, vol. 40, pp. 2817-2821, 2012. https://doi.org/10.1109/TPS.2012.2210913
  8. B. Selvan, K. Ramachandran, K. P. Sreekumar, T. K. Thiyagarajan, and P. V. Ananthapadmanabhan, "Numerical and experimental studies on DC plasma spray torch", Vacuum, vol. 84, pp. 444-452, 2009. https://doi.org/10.1016/j.vacuum.2009.09.009
  9. A. V. Likhanskii, M. N. Shneider, D. F. Opaits, R. B. Miles, and S. O. Macheret, "Numerical modeling of DBD plasma actuators and the induced air flow", pp. 1060- 1072, Jun. 2007.
  10. A. Srivastava, G. Prasad, "Characteristics of parallelplate and planar-surface dielectric barrier discharge at atmospheric pressure", Journal of Electrostatics, vol. 72, pp. 140-146, 2014. https://doi.org/10.1016/j.elstat.2014.01.002
  11. F. Mirhosseini, B. G. Colpitts, R. Pimentel, and Y. de Villers, "The effect of dielectric-barrier-discharge plasma actuators on electromagnetic", IEEE Transactions on Plasma Science, vol. 44, pp. 665-669, 2016. https://doi.org/10.1109/TPS.2016.2530315
  12. Y. Wu, Y. Li, M. Jia, H. Song, Z. Guo, X. Zhu, and Y. Pu, "Influence of operating pressure on surface dielectric barrier discharge plasma aerodynamic actuation characteristics", Applied Physics Letters, vol. 93, no. 3, pp. 123-126, 2008.
  13. S. Wolf, M. Arjomandi, "Investigation of the effect of dielectric barrier discharge plasma actuators on the radar cross section of an object", Journal of Physics D: Applied Physics, vol. 44, p. 315202, 2011. https://doi.org/10.1088/0022-3727/44/31/315202
  14. 이현재, 정인균, 하정제, 신웅재, 양진모, 이용식, 육종관, "유전체 장벽 방전 플라즈마의 monostatic 레이다 단면적 측정", 한국전자파학회논문지, 27(3), pp. 246-252, 2016년. https://doi.org/10.5515/KJKIEES.2016.27.3.246
  15. K. Samanta, M. Jassal, and A. K. Agrawal, "Atmospheric pressure glow discharge plasma and its applications in textile", Indian Journal of Fibre and Textile Research, vol. 31, no. 1, p. 83, 2006.
  16. C. A. Balanis, Antenna Theory: Analysis and Design, John Wiley & Sons, 2016.
  17. C. Larsson, M. Gustafsson, and G. Kristensson, Wideband Microwave Measurements of the Extinction Cross Section: Experimental Techniques: Electromagnetic Theory, Department of Electrical and Information Technology, Lund University, 2009.
  18. E. F. Knott, Radar Cross Section Measurements, Springer Science & Business Media, 2012.
  19. M. I. Skolnik, Radar Handbook, 1970.
  20. H. Shirai, T. Ishikawa, and Y. Watanabe, "A study of radar cross-section measurements in an anechoic chamber", Electrical Engineering in Japan, vol. 123, pp. 8-14, 1998.