DOI QR코드

DOI QR Code

철도차량 추진용 Linear Pulse Motor의 축소 모델 해석 및 추력 리플 저감 연구

Study on the FEA Model of the Linear Pulse Motor for Railway Application and Reduction of Thrust Ripple

  • Seol, Hyun-Soo (Dept. of Electrical Engineering, Hanyang University) ;
  • Lee, Gang-Seok (Dept. of Electrical Engineering, Hanyang University) ;
  • Jeong, Geochul (Dept. of Electrical Engineering, Hanyang University) ;
  • Lee, Ju (Dept. of Electrical Engineering, Hanyang University)
  • 투고 : 2017.03.21
  • 심사 : 2017.04.04
  • 발행 : 2017.06.01

초록

In this paper, we describe the LPM structure with a two-phase, which is not used previously, and explain its operation principle. In order to predict the accurate performance of LPM reduction model, finite element model was derived and the back EMF of LPM reduction model was measured and compared. In order to investigate the thrust and normal force of the LPM reduction model, a driving circuit capable of applying two-phase pulse currents was constructed and the performance was predicted in conjunction with the finite element analysis model. Finally, the design considering actual LPM size was performed. Since the size of the reduction model is small, the field could be made of a permanent magnet. However, it is almost impossible to manufacture a permanent magnet to match the size and capacity of a real LPM for a vehicle, in terms of cost and writing. Therefore, the actual vehicle LPM was replaced by wound type that generates a magnetic field by applying current to the field winding, and the final model was derived using the reaction surface method.

키워드

참고문헌

  1. Chan-Bae Park, Byung-Song Lee, Chang-Young Lee, "Characteristic Analysis of Superconducting LSM for the Wheel-rail-guided Very High Speed Train according to Winding Method of the Ground 3-phase Coils," The Tractions of the Korean Institute of Electrical Engineers Vol. 63, No. 8, pp. 1164-1169, 2014. https://doi.org/10.5370/KIEE.2014.63.8.1164
  2. Chan-Bae Park, Jae-Hee Kim, Byung-Song Lee, "Design of a Small-scaled Superconducting LSM for the Very High Speed Railway Vehicle," The Transactions of the Korean Institute of Electrical Engineers Vol. 63, No. 11, pp. 1602-1607, 2014. https://doi.org/10.5370/KIEE.2014.63.11.1602
  3. Hyun-Soo Seol, Eung-Seok Park, Ju Lee, Chan-Bae Park, "Design of High-Speed LSM Rotary Type Testing Machine in Consideration of Mechanical Strength," The Transactions of the Korean Institute of Electrical Engineers Vol. 64, No. 5, pp. 824-829, 2015. https://doi.org/10.5370/KIEE.2015.64.5.824
  4. Jaehuck Choi, Chanyong Zun, Hyungsoo Mok, "Reducing the Thrust Ripple Generated by the Staking of Stator Phase Windings of a Linear Pulse Motor," The Transactions of the Korean Institute of Electrical Engineers Vol. 66, No. 2, pp. 447-452, 2017. https://doi.org/10.5370/KIEE.2017.66.2.447
  5. Yun-Chul Choi, Jung-Ho Lee, "Optimum Design Criteria for Maximum Torque Density & Minimum Torque Ripple of SynRM according to the Rated Wattage using Response Surface Methodology," The Transactions of the Korean Institute of Electrical Engineers Vol. 57, No. 10, pp. 1777-1781, 2008.
  6. Young-Hyun Kim, Jung-Ho Lee, Nam-Hoon Kim, Bon-Sam Koo, Chan Hui Kim, "Optimum Design Criteria for Maximum Torque Density & Minimum Torque Ripple of Flux Switching Motor using RSM & FEM," The Transactions of the Korean Institute of Electrical Engineers Vol. 59, No. 3, pp. 549-554, 2010.