DOI QR코드

DOI QR Code

Thermal-flow analysis of a simple LTD (Low-Temperature-Differential) heat engine

  • Kim, Yeongmin (Department of Nuclear and Energy Engineering, Jeju National University) ;
  • Kim, Won Sik (Department of Nuclear and Energy Engineering, Jeju National University) ;
  • Jung, Haejun (Department of Nuclear and Energy Engineering, Jeju National University) ;
  • Chen, Kuan (Department of Mechanical Engineering, University of Utah) ;
  • Chun, Wongee (Department of Nuclear and Energy Engineering, Jeju National University)
  • 투고 : 2017.02.01
  • 심사 : 2017.02.27
  • 발행 : 2017.03.31

초록

A combined thermal and flow analysis was carried out to study the behavior and performance of a small, commercial LTD (Low-Temperature-Differential) heat engine. Laminar-flow solutions for annulus and channel flows were employed to estimate the viscous drags on the piston and the displacer and the pressure difference across the displacer. Temperature correction factors were introduced to account for the departure from the ideal heat transfer processes. The analysis results indicate that the work required to overcome the viscous drags on engine moving parts and to move the displacer is much smaller than the moving-boundary work produced by the power piston for temperature differentials in the neighborhood of $20^{\circ}C$ and engine speeds below 10 RPS. A comparison with experimental data reveals large degradations from the ideal heat transfer processes. Thus, heat-transfer devices inside the displacer cylinder are recommended.

키워드

참고문헌

  1. Cengel, Y. A., Boles. M. A., 2015, Thermodynamics: An Engineering Approach, 8th Edition, McGraw Hill., New York, USA, pp. 275-313.
  2. Shirani, M., Kadkhodaei. M., 2016, One-dimensional constitutive model with transformation surfaces for phase transition in shape memory alloys considering the effect of loading history, International Journal of Solids and Structures, Vol. 81, pp. 117-129. https://doi.org/10.1016/j.ijsolstr.2015.11.019
  3. Chen, K., Gwilliam. S. B., 1996, An analysis of the heat transfer rate and efficiency of TE (Thermoelectric) cooling systems, International Journal of Energy Research, Vol. 20, No. 5, pp. 399-417. https://doi.org/10.1002/(SICI)1099-114X(199605)20:5<399::AID-ER160>3.0.CO;2-R
  4. Riba, J. R., et al., 2016, Rare-earth-free propulsion motors for electric vehicles: A technology review, Renewable and Sustainable Energy Reviews, Vol. 57, pp. 367-379. https://doi.org/10.1016/j.rser.2015.12.121
  5. Rizzo, J. G., 1995, The Stirling engine manual, Camden miniature steam service.
  6. Senft, J. R., 1993, Ringbom Stirling Engines, Oxford University Press, New York, USA.
  7. Alveno, D., et al., 2105, Electricity harvesting from low temperature waste heat, ME EN 4010 Final Design Report (faculty advisors: K. Chen and S. Roundy), Mechanical Engineering Department, University of Utah, USA.
  8. Aragon-Gonzalez, G., et al., 2013, Developing and testing low cost LTD Stirling engines, THERMODYNAMICS, Revista Mexicana de Fisica, Vol. 50, No. 1, pp. 199-203.