한국측량학회지 (Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography)

  • 제35권4호
  • /
  • Pages.241-248
  • /
  • 2017
  • /
  • 1598-4850(pISSN)
  • /
  • 2288-260X(eISSN)
한국측량학회 (Korean Society of Surveying, Geodesy, Photogrammetry and Cartography)
권호 표지
DOI QR코드

DOI QR Code

Accuracy Improvement of KOMPSAT-3 DEM Using Previous DEMs without Ground Control Points

  • Lee, Hyoseong (Dept. of Civil Engineering, Sunchon National University) ;
  • Park, Byung-Wook (Dept. of Civil, Safety, and Environmental Engineering, Hankyong National University) ;
  • Ahn, Kiweon (Dept. of Civil Engineering, Gyeongsang National University)
  • 투고 : 2017.07.13
  • 심사 : 2017.08.28
  • 발행 : 2017.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

GCPs (Ground Control Points) are needed to correct the DEM (Digital Elevation Model) produced from high-resolution satellite images and the RPC (Rational Polynomial Coefficient). It is difficult to acquire the GCPs through field surveys such as GPS surveys and to read the image coordinates corresponding to the GCPs. In addition, GCPs cannot cover the entire image of the test site, and the RPC correction results may be influenced by the arrangement and distribution of the GCPs in the image. Therefore, a new method for the RPC correction is needed. In this study, an LHD (Least-squares Height Difference) DEM matching method was applied using previous DEMs: SRTM DEM, digital map DEM, and corrected IKONOS DEM. This was carried out to correct the DEM produced from KOMPSAT-3 satellite images and the provided RPC without GCPs. The IKONOS DEM had the highest accuracy, and the height accuracy was about ${\pm}3m$ RMSE in a mountainous area and about ${\pm}2m$ RMSE in an area with only low heights.

키워드

참고문헌

  1. Besl, P., and Mckay, N. (1992), A method for registration of 3-D shapes, IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 14, No. 2, pp. 239-256. https://doi.org/10.1109/34.121791
  2. Bernhard, R., Michael, E., Achim, R., and Richard, B. (2003), The shuttle radar topography mission-new class of digital elevation models acquired by spaceborne radar, ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 57, pp. 241-262. https://doi.org/10.1016/S0924-2716(02)00124-7
  3. Ebner, H. and Strunz, G. (1988), Combined point determination using digital terrain models as control information, International Archives of Photogrammetry and Remote Sensing, Vol. 27, Part B11/3, pp. 578-587.
  4. Gruen, A. and Akca, D. (2005), Least squares 3D surface and curve matching, ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 59, No. 3, pp. 151-174. https://doi.org/10.1016/j.isprsjprs.2005.02.006
  5. Han, D. (2007), Automatic Adjustment of Airborne LiDAR Strip Data Using the ICP and Extrema Detection Algorithm, Ph.D. dissertation, Seoul National University, Seoul, Korea, 107p. (in Korean with English abstract)
  6. Joung, J. (2009), 3D Environment Reconstruction Using Modified ICP Algorithm by Fusion of a Camera and a 3D Laser Range Finder, Master's thesis, Korea Advanced Institute of Science and Technology, Daejeon, Korea, 83p. (in Korean with English abstract)
  7. Karras, G. and Petsa, E. (1993), DEM matching and detection of deformation in close-range photogrammetry without control, Photogrammetric Engineering & Remote Sensing, Vol. 59, No. 9, pp. 1419-1424.
  8. Kim, T. and Jeong, J. (2011), DEM matching for bias compensation of rigorous pushbroom sensor models, ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 66, pp. 692-699. https://doi.org/10.1016/j.isprsjprs.2011.06.002
  9. Lee, H. (2015), Accuracy improvement of the ICP DEM matching, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 33, No. 5, pp. 443-451. (in Korean with English abstract) https://doi.org/10.7848/ksgpc.2015.33.5.443
  10. Lee, C.N. and Oh, J.H. (2014), LiDAR chip for automated geo-referencing of high-resolution satellite imagery, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 32, No. 4-1, pp. 319-326. (in Korean with English abstract) https://doi.org/10.7848/ksgpc.2014.32.4-1.319
  11. Lee, H., Han, D., and Ahn, K. (2011), Change estimation of tidal flat elevation of Suncheon Bay using aerial images, Journal of Korean Society of Environmental Technology, Vol. 12, No. 3, pp. 223-229. (in Korean with English abstract)
  12. Lee, H., Seo, D., Ahn, K., and Jeong, D. (2013), Positioning accuracy analysis of KOMPSAT-3 satellite imagery by RPC adjustment, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 31, No. 6-1, pp. 503-510. (in Korean with English abstract) https://doi.org/10.7848/ksgpc.2013.31.6-1.503
  13. Lee, H., Shin, S., and Ahn, K. (2004), Bias compensation of IKONOS geo-level satellite imagery using the digital map, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 22, No. 4, pp. 331- 338. (in Korean with English abstract)
  14. Oh, J.H. and Lee, C.N. (2014), Automated improvement of RapidEye 1-B geo-referencing accuracy using 1:25,000 digital maps, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 32, No.5, pp. 505-513. (in Korean with English abstract) https://doi.org/10.7848/ksgpc.2014.32.5.505
  15. Oh, K. and Jung, H. (2012), Automatic geometric calibration of KOMPSAT-2 stereo pair data, Korean Journal of Remote Sensing, Vol. 28, No. 2, pp. 191-202. (in Korean with English abstract) https://doi.org/10.7780/kjrs.2012.28.2.191
  16. Rosenholm, D. and Torlegard, K. (1988), Three-dimensional absolute orientation of stereo models using digital elevation models, Photogrammetric Engineering & Remote Sensing, Vol. 54, No. 10, pp. 1385-1389.
  17. Zhang, T., Cen, M., Wu, X., and Zhou, G. (2005), Fully automatic DEM deformation detection without control points using differential model based on LZD algorithm, Proceedings of International Geoscience and Remote Sensing Symposium(IGARSS) 2005, IEEE, 25-29 July, Seoul, Korea, Vol. 6, pp. 3982-3985.