References
- Boonkanokwong, V., Remy, B., Khinast, J.G., Glasser, B.J. (2016) The Effect of the Number of Impeller Blades on Granular Flow in a Bladed Mixer, Powder Technol., 302, pp.333-349. https://doi.org/10.1016/j.powtec.2016.08.064
- Chandratilleke, G.R., Yu, A.B., Stewart, R.L., Bridgwater, J. (2009) Effect of Blade Rake Angle and Gap on Particle Mixing in a Cylindrical Mixer, Powder Technol., 193(3), pp.303-311. https://doi.org/10.1016/j.powtec.2009.03.007
- Cho, M. (2017) Particle-Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices, Trans. Korean Soc. Mech. Eng., B, 41(2), pp.145-152. https://doi.org/10.3795/KSME-B.2017.41.2.145
- Cho, M., Dutta, P., Shim, J. (2017) A Non-sampling Mixing Index for Multicomponent Mixtures, Powder Technol., 319, pp.434-444. https://doi.org/10.1016/j.powtec.2017.07.011
- Choi, Y., Choi, J., Kim, D., Hur, N. (2013) A Numerical Analysis on Mixing Performance for Various Types of Turbine Impeller in a Stirred Vessel, Korea Soc. Fluid Mach., 16(1), pp.47-55. https://doi.org/10.5293/kfma.2013.16.1.047
- Cleary, P.W., Sinnott, M.D. (2008) Assessing Mixing Characteristics of Particle-Mixing and Granulation Devices, Particuology, 6(6), pp.419-444. https://doi.org/10.1016/j.partic.2008.07.014
- Cundall, P.A., Strack, O.D.L. (1979) A Discrete Numerical Model for Granular Assemblies, Geotechnique, 29(1), pp.47-65. https://doi.org/10.1680/geot.1979.29.1.47
- Hassanpour, A., Tan, H., Bayly, A., Gopalkrishnan, P., Ng, B., Ghadiri, M. (2011) Analysis of Particle Motion in a Paddle Mixer using Discrete Element Method (DEM), Powder Technol., 206(1-2), pp.189-194. https://doi.org/10.1016/j.powtec.2010.07.025
- Jeong, J.-Y., Choi, E.-H., Kang, Y.-J., Noh, Y., Lim, O-K. (2017) Influence of Design Variables on Flow Characteristics of Poppet Valve Using Analysis of Means, J. Comput. Struct. Eng. Ins. Korea, 30(3), pp.239-248. https://doi.org/10.7734/COSEIK.2017.30.3.239
- Lee, S.-H., Yu, E. (2017) Model Updating of a RC Frame Building using Response Surface Method and Multiobjective Optimization, J. Comput. Struct. Eng. Ins. Korea, 30(1), pp.39-46. https://doi.org/10.7734/COSEIK.2017.30.1.39
- Nguyen, D.H., Kang, N., Park, J. (2013) Validation of Partially Flexible Rod Model Based on Discrete Element Method Using Beam Deflection and Vibration, Powder Technol., 237, pp.147-152. https://doi.org/10.1016/j.powtec.2013.01.038
- Pantaleev, S., Yordanova, S., Janda, A., Marigo, M., Ooi, J.Y. (2017) An Experimentally Validated DEM Study of Powder Mixing in a Paddle Blade Mixer, Powder Technol., 311, pp.287-302. https://doi.org/10.1016/j.powtec.2016.12.053
- Poux, M., Fayolle, P., Bertrand, J., Bridoux, D., Bousquet, J. (1991) Powder Mixing: Some Practical Rules Applied to Agitated Systems, Powder Technol., 68(3), pp.213-234. https://doi.org/10.1016/0032-5910(91)80047-M
- Rhodes, M.J. (2013) Introduction to Particle Technology, John Wiley & Sons, England, p.474.
- Song, G., Park, J. (2014) Discrete Element Method for Emergency Flow of Pedestrian in S-Type Corridor, J. Nanosci. & Nanotechnol., 14(10), pp.7469-7476. https://doi.org/10.1166/jnn.2014.9555
- Wen, Y., Liu, M., Liu, B., Shao, Y. (2015) Comparative Study on the Characterization Method of Particle Mixing Index Using DEM Method, Procedia. Eng., 102, pp.1630-1642. https://doi.org/10.1016/j.proeng.2015.01.299
- Zhang, H.W., Zhou, Q., Muhlhaus, H. (2011) A DEM Study on the Effective Thermal Conductivity of Granular Assemblies, Powder Technol., 205(1-3), pp.172-183. https://doi.org/10.1016/j.powtec.2010.09.008