참고문헌
- M. N. Zervas and C. A. Codemard, "High power fiber lasers: a review," IEEE J. Sel. Top. Quantum Electron. 20(5), 0904123 (2014).
- Y. Ma, X. Wang, J. Leng, H. Xiao, X. Dong, J. Zhu, W. Du, P. Zhou, X. Xu, L. Si, Z. Liu, and Y. Zhao, "Coherent beam combination of 1.08 kW fiber amplifier array using single frequency dithering technique," Opt. Lett. 36(6), 951-953 (2011). https://doi.org/10.1364/OL.36.000951
- Y. Shamir, R. Zuitlin, Y. Sintov, and M. Shtait "3 kW-level incoherent and coherent mode combining via all-fiber fused Y-couplers", in Proc. Frontiers in Optics (Optical Society of America 2012), paper FW6C.
- S. M. Redmond, D. J. Ripin, C. X. Yu, S. J. Augst, T. Y. Fan, P. A. Thielen, J. E. Rothenberg, and G. D. Goodno, "Diffractive coherent combining of a 2.5 kW fiber laser array into a 1.9 kW Gaussian beam", Opt. Lett. 37(14), 2832-2834 (2012). https://doi.org/10.1364/OL.37.002832
- A. Hemming, N. Simakov, A. Davidson, S. Bennetts, M. Hughes, N. Carmody, P. Davies, L. Corena, D. Stepanov, J. Haub, R. Swain, and A. Carter, "A monolithic cladding pumped holmium-doped fibre laser," in CLEO: 2013, OSA Technical Digest (Optical Society of America, 2013), paper CW1M.1
-
V. I. Kopp, J. Park, M. Wlodawski, J. Singer, and D. Neugroshl, "Polarization maintaining, high-power and high efficiency (6+1)
${\times}$ 1 pump/signal combiner", Proc. SPIE 8961, Fiber Lasers XI: Technology, Systems, and Applications. 89612N (2014). - V. Filippov, Y. Chamorovskii, J. Kerttula, K. Golant, M. Pessa, and O. G. Okhotnikov, "Double clad tapered fiber for high power applications," Opt. Express 16(3), 1929-1944 (2008). https://doi.org/10.1364/OE.16.001929
- C. Wirth, O. Schmidt, A. Kliner, T. Schreiber, R. Eberhardt, and A. Tünnermann, "High-power tandem pumped fiber amplifier with an output power of 2.9 kW," Opt. Lett. 36(16), 3061-3063 (2011). https://doi.org/10.1364/OL.36.003061
- C. A. Codemard, J. K. Sahu, and J. Nilsson, "Tandem cladding-pumping for control of excess gain in Ytterbiumdoped fiber amplifiers," IEEE J. Quantum Electron. 46(12), 1860-1869 (2010). https://doi.org/10.1109/JQE.2010.2076408
- Z. Huang, Y. Zhang, Y. Deng, H. Lin, Q. Li, L. Zhao, and J. Wang, "Tapered inner-cladding fiber design for uniform heat deposition in Ytterbium-doped fiber amplifiers", J. Opt. 17(4), 045701-045707 (2015). https://doi.org/10.1088/2040-8978/17/4/045701
- S. Yin, P. Yan, and M. Gong, "End-pumped 300 W continuouswave ytterbium-doped all-fiber laser with master oscillator multi-stage power amplifiers configuration," Opt. Express 16(22), 17864-17869 (2008). https://doi.org/10.1364/OE.16.017864
- J. K. Kim, C. Hagemann, T. Schreiber, T. Peschel, S. Bohme, R. Eberhardt, and A. Tunnermann, "Monolithic all-glass pump combiner scheme for high-power fiber laser systems," Opt. Express 18(12), 13194-13203 (2010). https://doi.org/10.1364/OE.18.013194
-
B. Shaw, R. Gattass, F. Kung, D. Gibson, V. Nguyen, G. Chin, L. Busse, I. Aggarwal, and J. S. Sanghera, "Arsenic sulfide 7
${\times}$ 1 multimode fiber combiner," in Advanced Solid- State Lasers Congress, M. Ebrahim-Zadeh and I. Sorokina, eds., OSA Technical Digest (Optical Society of America, 2013), paper JTh2A.15. - H.-S. Seo, J. T. Ahn, B. J. Park, J.-H. Song, and W. Chung, "Efficient pump beam multiplexer based on single-mode fibers", Jpn. J. Appl. Phys. 51(1), 010203 (2012). https://doi.org/10.7567/JJAP.51.010203