DOI QR코드

DOI QR Code

Experimental and analytical study of steel slit shear wall

  • 투고 : 2017.02.24
  • 심사 : 2017.05.21
  • 발행 : 2017.08.30

초록

A steel slit shear wall has vertical slits and when it is under lateral loads, the section between these slits has double-curvature deformation, and by forming a flexural plastic hinge at the end of the slit, it dissipates the energy on the structure. In this article, Experimental, numerical and analytical analyses are performed to study the effect of slit shape and edge stiffener on the behavior of steel slit shear wall. Seismic behavior of three models with different slit shapes and two models with different edge stiffener shapes are studied and compared. Hysteresis curves, energy dissipation, out of plane buckling, initial stiffness and strength are discussed and studied. The proposed slit shape reduces the initial stiffness, increases the strength and energy dissipation. Also, edge stiffener shape increases the initial stiffness significantly.

키워드

참고문헌

  1. ATC-24 (1992), Guidelines for cyclic seismic testing of components of steel structures; ATC-24, Redwood City, CA, USA.
  2. Abaqus, V.6.14 (2014), 6.14 Documentation; Dassault Systemes Simulia Corporation.
  3. Cortes, G. and Liu, J. (2011), "Experimental evaluation of steel slit panel-frames for seismic resistance", J. Constr. Steel Res., 67(2), 181-191. https://doi.org/10.1016/j.jcsr.2010.08.002
  4. Dhar, M.M. and Bhowmick, A.K. (2016), "Seismic response estimation of steel plate shear walls using nonlinear static methods", Steel Compos. Struct., Int. J., 20(4), 777-799. https://doi.org/10.12989/scs.2016.20.4.777
  5. Hitaka, T. and Matsui, C. (2003), "Experimental study on steel shear wall with slits", J. Struct. Eng., Int. J., 129(5), 586-595. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(586)
  6. Hitaka, T., Matsui, C. and Sakai, J.I. (2007), "Cyclic tests on steel and concrete-filled tube frames with Slit Walls", Earthq. Eng. Struct. Dyn., 36(6), 707-727. https://doi.org/10.1002/eqe.648
  7. Jacobsen, A., Hitaka, T. and Nakashima, M. (2010), "Online test of building frame with slit-wall dampers capable of condition assessment", J. Constr. Steel Res., 66(11), 1320-1329. https://doi.org/10.1016/j.jcsr.2010.04.011
  8. Jayalekshmi, B. and Chinmayi, H. (2016), "Seismic analysis of shear wall buildings incorporating site specific ground response", Struct. Eng. Mech., Int. J., 60(3), 433-453. https://doi.org/10.12989/sem.2016.60.3.433
  9. Krawinkler, H. (2009), "Loading histories for cyclic tests in support of performance assessment of structural components", The 3rd International Conference on Advances in Experimental Structural Engineering, San Francisco, CA, USA, October.
  10. Muto, K. (1968), Earthquake Resistant Design of 36-storied Kasumigaseki Building, Muto Institute of Structural Mechanics.
  11. Muto, K., Ohmori, N. and Takahashi, T. (1973), "A study on reinforced concrete slitted shear walls for high-rise buildings", Proceedings of the 5th World Conference on Earthquake Engineering, Rome, Italy, June.
  12. Parulekar, Y., Reddy, G., Singh, R., Gopalkrishnan, N. and Ramarao, G. (2016), "Seismic performance evaluation of midrise shear walls: Experiments and analysis", Struct. Eng. Mech., Int. J., 59(2), 291-312. https://doi.org/10.12989/sem.2016.59.2.291
  13. Rahmzadeh, A., Ghassemieh, M., Park, Y. and Abolmaali, A. (2016), "Effect of stiffeners on steel plate shear wall systems", Steel Compos. Struct., Int. J., 20(3), 545-569. https://doi.org/10.12989/scs.2016.20.3.545
  14. Sabuncu, M., Ozturk, H. and Yashar, A. (2016), "Static and dynamic stability of cracked multi-storey steel frames", Struct. Eng. Mech., Int. J., 58(1), 103-119. https://doi.org/10.12989/sem.2016.58.1.103
  15. Shi, Y., Wang, M. and Wang, Y. (2011), "Experimental and constitutive model study of structural steel under cyclic loading", J. Constr. Steel Res., 67(8), 1185-1197. https://doi.org/10.1016/j.jcsr.2011.02.011
  16. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability 1961, McGrawHill-Kogakusha Ltd., Tokyo, Japan, 109 p.
  17. Vatansever, C. and Berman, J.W. (2015), "Analytical investigation of thin steel plate shear walls with screwed infill plate", Steel Compos. Struct., Int. J., 19(5), 1145-1165. https://doi.org/10.12989/scs.2015.19.5.1145
  18. Vatansever, C. and Yardimci, N. (2011), "Experimental investigation of thin steel plate shear walls with different infill-toboundary frame connections", Steel Compos. Struct., Int. J., 11(3), 251-271. https://doi.org/10.12989/scs.2011.11.3.251
  19. Wang, M., Yang, W., Shi, Y. and Xu, J. (2015), "Seismic behaviors of steel plate shear wall structures with construction details and materials", J. Constr. Steel Res., 107(4), 194-210. https://doi.org/10.1016/j.jcsr.2015.01.007

피인용 문헌

  1. Experimental study on hysteretic behavior of steel moment frame equipped with elliptical brace vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.891