DOI QR코드

DOI QR Code

Parallel damage detection through finite frequency changes on multicore processors

  • Messina, Arcangelo (Dipartimento di Ingegneria dell'Innovazione, Universita del Salento) ;
  • Cafaro, Massimo (Dipartimento di Ingegneria dell'Innovazione, Universita del Salento)
  • 투고 : 2017.01.05
  • 심사 : 2017.05.14
  • 발행 : 2017.08.25

초록

This manuscript deals with a novel approach aimed at identifying multiple damaged sites in structural components through finite frequency changes. Natural frequencies, meant as a privileged set of modal data, are adopted along with a numerical model of the system. The adoption of finite changes efficiently allows challenging characteristic problems encountered in damage detection techniques such as unexpected comparison of possible shifted modes and the significance of modal data changes very often affected by experimental/environmental noise. The new procedure extends MDLAC and exploits parallel computing on modern multicore processors. Smart filters, aimed at reducing the potential damaged sites, are implemented in order to reduce the computational effort. Several use cases are presented in order to illustrate the potentiality of the new damage detection procedure.

키워드

참고문헌

  1. Adams, R.D., Cawley, P., Pye, C.J. and Stone, B.J. (1978), "A vibration technique for non-destructively assessing the integrity of structures", J. Mech. Eng. Sci., 20(2), 93-100. https://doi.org/10.1243/JMES_JOUR_1978_020_016_02
  2. Allemang, R.J. and Brown, D.L. (1982), "A correlation coefficient for modal vector analysis", Proceedings of the 1st International Modal Analysis Conference, Orlando, Florida, November.
  3. Chang, P.C., Flatau, A. and Liu, S.C. (2003), "Review paper: Health monitoring of civil infrastructure", Struct. Hlth. Monit., 2(3), 257-267. https://doi.org/10.1177/1475921703036169
  4. Contursi, T., Messina, A. and Williams, E. (1998), "A multipledamage location assurance criterion based on natural frequency changes", J. Vib. Control, 4(5), 619-633. https://doi.org/10.1177/107754639800400505
  5. Dimarogonas, A.D. (1996), "Vibration of cracked structures: A state of the art review", Eng. Fract. Mech., 55(5), 831-857. https://doi.org/10.1016/0013-7944(94)00175-8
  6. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods, identification methods", Shock Vib. Digest, 30, 91-105. https://doi.org/10.1177/058310249803000201
  7. Fan, W. and Qiao, P. (2011), "Vibration-based damage identification methods: A review and comparative study", Struct. Hlth. Monit., 10(1), 83-111. https://doi.org/10.1177/1475921710365419
  8. Farrar, C.R., Cornwell, P.J., Doebling, S.W. and Prime, M.B. (2000), "Structural Health Monitoring Studies of the Alamosa Canyon and I-40 Bridges", Los Alamos National Laboratory.
  9. Farrar, C.R., Doebling, S.W. and Nix, D.A. (2001), "Vibrationbased structural damage identification", Phil. Tran. Royal Soc. London A: Math. Phys. Eng. Sci., 359(1778), 131-149. https://doi.org/10.1098/rsta.2000.0717
  10. Friswell, M.I. (2007), "Damage identification using inverse methods", Phil. Tran. Royal Soc. London A: Math. Phys. Eng. Sci., 365(1851), 393-410. https://doi.org/10.1098/rsta.2006.1930
  11. Hakim, S. and Razak, H.A. (2014), "Modal parameters based structural damage detection using artificial neural networks-a review", Smart Struct. Syst., 14(2), 159-189. https://doi.org/10.12989/sss.2014.14.2.159
  12. Horn, R. and Johnson, C. (1985), Matrix Analysis, Cambridge University Press.
  13. MathWorks (2017), Matlab(C) getting started guide.
  14. Messina, A. and Mantriota, G. (2012), "Introspective of damage detection methods based on natural frequencies changes and sensitivities", Proceedings of the 15th International Conference on Experimental Mechanics, New Trends and Perspectives. Porto, July.
  15. Messina, A. and Williams, E.J. (1996), "Damage detection and localisation using natural frequency changes", Proceedings of the 1st International Conference on Identification in Engineering Systems, Wales, Swansea.
  16. Messina, A., Williams, E. and Contursi, T. (1998), "Structural damage detection by a sensitivity and statistical-based method", J. Sound Vib., 216(5), 791-808. https://doi.org/10.1006/jsvi.1998.1728
  17. Montalvao, D., Maia, N. and Ribeiro, A. (2006), "A review of vibration-based structural health monitoring with special emphasis on composite materials", Shock Vib. Digest, 38(4), 295-324. https://doi.org/10.1177/0583102406065898
  18. Rytter, A. (1993), "Vibrational based inspection of civil engineering structures", Ph.D. Dissertation, University of Aalborg, Denmark.
  19. Salawu, O. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/S0141-0296(96)00149-6
  20. Sinou, J. (2013), "A review of damage detection and health monitoring of mechanical systems from changes in the measurement of linear and non-linear vibrations", Hal archivesouvertes.fr
  21. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D. W., Nadler B. R. and Czarnecki J. J. (2004), "A review of structural health monitoring literature", 1996-2001, LA (Series) (Los Alamos, N.M.).
  22. Sonnenhof Holdings (2013), Lisa finite element analysis software version 8.0.0 (2013), Tutorials and Reference Guide. http://www.lisafea.com.