References
- Hanafy, E. A. and Emery, J. J., 1980, Advancing face simulation of tunnel excavations and lining placement, In Proceeding of the 13th Canadian Rock Mechanics Symposium, Toronto, 119-125.
- Health and Safety Executive (HSE), 1996, Safety of new austrian tunnelling method (NATM) tunnels, 26-32.
- Jang, W. Y., Yang, H. S., and Chung, S. K., 2007, Analysis for measuring displacement of tunnel face using horizontal inclinometer, Tunnel and Underground Space, Journal of Korean Society for Rock Mechanics, 17(5), 428-434 (in Korean with English abstract).
- Kim, C. H., 2013, Measurement of tunnel arch settlements ahead of and behind the tunnel face using a horizontal inclinometer and settlement pins, Tunnel and Underground Space, Journal of Korean Society for Rock Mechanics, 23(2), 120-129 (in Korean with English abstract).
- Kim, C. H., Chae, Y. S., and Park, Y. J, 2008, Prediction of preceding displacement of a soil-tunnel by displacement monitoring using horizontal inclinometer, Tunnel and Underground Space, Journal of Korean Society for Rock Mechanics, 18(5), 355-365 (in Korean with English abstract).
- Kim, K. S., Kim, Y. S., You, K. H., Park, Y. J., and Lee, D. H., 2003, Prediction of change in ground condition ahead of tunnel face using three-dimensional convergence analysis, Tunnel and Underground Space, Journal of Korean Society for Rock Mechanics, 13(6), 476-485 (in Korean with English abstract).
- Kim, K. Y., Kim, C. Y., Hong, S. W., Bae, G. J., Seo, Y. S., and Jeon, J. S., 2003, A study on the measurement of tunnel pre-displacement using horizontal inclinometer, The Annual Conference of the Korean Society of Civil Engineers, 4878-4883 (in Korean).
- Lee, I. M., Kang, G. D., and Park, K. J., 1998, Prediction of ground-condition ahead of the tunnel face by using 3-dimensional absolute displacements, The Journal of the Korean Geotechnical Society, 14(4), 17-31 (in Korean with English abstract).
- Lee, I. M., Lee, S. J., Lee, J. G., and Lee, D. H., 2002, Convergence change in a tunnel face approaching fault zones, Tunnelling Technology, 4(3), 235-245 (in Korean with English abstract).
- Moon, S. W., Yun, H. S., Kim, W. S., Na, J. H., Kim, C. Y., and Seo, Y. S., 2014, Correlation analysis between weight ratio and shear strength of fault materials using multiple regression analysis, The Journal of Engineering Geology, 24(3), 397-409 (in Korean with English abstract). https://doi.org/10.9720/kseg.2014.3.397
- Panet, M., 1979, Time-dependent deformation in underground works, 4th ISRM Congress on Rock mechanics, International Society for Rock Mechanics, Montreux, 3, 279-289.
- Panet, M. and Guenot, A., 1982, Analysis of convergence behind the face of tunnel, Proceedings of the International Conference on Tunnelling, Brighton, The Institution of Mining and Metallurgy, 197-204.
- Park, Y. J., You, K. H., Song, H. S., Kim, K. S., and Lee, D. H., 2004, The prediction of ground condition ahead of the tunnel face using 3-dimensional numerical analysis, Tunnel and Underground Space, Journal of Korean Society for Rock Mechanics, 14(6), 440-449 (in Korean with English abstract).
- Schubert, P. and Vavrovsky, G. M., 1994, Interpretation of monitoring results, World Tunnelling, 351-356.
- Schubert, W. and Steindorfer, A., 1996, Selective displacement monitoring during tunnel excavation, Felsbau, 14(2), 93-98.
- Seo, Y. S. and Yun, H. S., 2014, The mechanical properties by rock type in Korea, Korean Radioactive Waste Society Spring 2014 workshop (in Korean).
- Shin, H. S., Lee, S. H., and Bae, G. J., 2007, Survey of tunnel collapses, The Annual Conference of the Korean Society of Civil Engineers, 2979-2982 (in Korean).
- Song, G. J., Yun, H. S., and Seo, Y. S., 2016, Prediction of fault zone ahead of tunnel face using longitudinal displacement measured on tunnel face, The Journal of Engineering Geology, 26(2), 187-196 (in Korean with English abstract). https://doi.org/10.9720/kseg.2016.2.187
- Vassilev, V. H. and Hrisstov, T. N., 1988, Influence of the heading face and a two-dimensional calculation model of tunnel linings, In Proceeding of the 6th international Conference on Numerical Methods in Geomech., Innsbruck, 3, 1551-1555.
- Yim, S. B., Yun, H. S., Seo, Y. S., and Park, S. H., 2007, Estimation of total displacements by RMR grades using 3-dimensional numerical analysis, The Journal of Engineering Geology, 17(2), 217-224 (in Korean with English abstract).
- Yun, H. S., Ban, J. D., Lee, C. K., and Seo, Y. S., 2015a, The uniaxial compressive strength according to contents of breccia in fault gouge, Proceedings of Korean Society of Engineering Geology 2015 Fall Conference, 175p (in Korean).
- Yun, H. S. and Seo, Y. S., 2016, Analysis of fault attitudes by using trajectories of the maximum longitudinal displacement on tunnel face, The Journal of Engineering Geology, 26(3), 393-401 (in Korean with English abstract). https://doi.org/10.9720/kseg.2016.3.393
- Yun, H. S., Moon, S. W., Song, G. J., and Seo, Y. S., 2015b, Case studies of geotechnical parameters applied on collapsed tunnels in fault zone of Korea, Korean Geotechnical Society Spring National Conference, 755-758 (in Korean).
- Yun, H. S., Song, G. J., Kim, Y. B., Kim, C. Y., and Seo, Y. S., 2015c, Developments of real-time monitoring system to measure displacements on face of tunnel in weak rock, Journal of Korean Tunnelling and Underground Space Association, 17(4), 441-455 (in Korean with English abstract). https://doi.org/10.9711/KTAJ.2015.17.4.441