참고문헌
- AIK (2016) Korean Building Code: Chapter 7. Steel Structures, Architectural Institute of Korea.
- Wardenier, J., Kurobane, Y., Packer, J.A., van der Vegte, G.J., and Zhao, X.-L. (2008) Construction with Hollow Steel Sections - No.1: Design guide for Circular Hollow Section(CHS) Joints Under Predominantly Static Loading, 2nd ed., CIDECT.
- AISC (2010) Specification for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL.
- CEN (2005) Eurocode 3: Design of Steel Structures - Part 1.8: Design of Joints, European Committee for Standardization, Brussels.
- Togo, T. (1967) Experimental Study on Mechanical Behavior of Tubular Joints, Ph.D. Dissertation, Osaka University, Osaka.
- van der Vegte, G.J. (1995) The Static Strength of Uniplanar and Multiplanar Tubular T- and X-Joints, Ph.D. Dissertation, Delft University of Technology, Delft.
- Qian, X.D. (2005) Static Strength of Thick-Walled CHS Joints and Global Frame Behavior, Ph.D. Dissertation, National University of Singapore, Singapore.
- Makino, Y., Kurobane, Y., and Tozaki, T. (1989) Ultimate Strength Analysis of Simple CHS Joints Using the Yield Line Theory, Proc. 3rd Int'l Symposium on Tubular Structures, Tubular Structures III, pp.147-153.
- Soh, C.K., Chan, T.K., and Yu, S.K. (2000) Limit Analysis of Ultimate Strength of Tubular X-Joints, Journal of Structural Engineering, ASCE, Vol.126, No.7, pp.790-797. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:7(790)
- Sammet, H. (1963) Die Festigkeit Knotenblechloser Rohrverbindungen im Stahlbau, Schweisstechnik, Vol.13, pp.481-485.
- Kanatani, H. (1966) Experimental Study on Welded Tubular Connections, Faculty of Engineering Report, Vol.12, pp.13-41.
- EPR (1971) Experimental Determination of the Ultimate Strength of Tubular Joints, Exxon Production Research Co., Houston, TX.
- JISC (1972) Study of Tubular Joints Used in Marine Structures, The Society of Steel Construction of Japan.
- Gibstein, M.B. (1973) Static Strength of Tubular Joints, Report No. 73-86-C, Det norske Veritas.
- Boone, T.J., Yura, J.A., and Hoadley, P.W. (1982) Chord Stress Effects on the Ultimate Strength of Tubular Joints, PMFSEL Report No. 82-1, University of Texas at Austin.
- Weinstein, R.M. and Yura, J.A. (1986) The Effect of Chord Stresses on the Static Strength of DT Tubular Connections, Proc. Offshore Technology Conf., OTC 5135, Houston, TX.
- Noordhoek, C. and Verheul, A. (1998) Static Strength of High Strength Steel Tubular Joints, CIDECT Report 5BD-9/98, Delft University of Technology, Delft.
- Kang, C.T., Moffat, D.G., and Mistry, J. (1998) Strength of DT Tubular Joints with Brace and Chord Compression, Journal of Structural Engineering, ASCE, Vol.124, No.7, pp.775-783. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(775)
- van der Vegte, G.J., Liu, D.K., Makino, Y., and Wardenier, J. (2003) New Chord Load Functions for Circular Hollow Section Joints, CIDECT Report 5BK-4/03, Delft University of Technology, Delft.
- van der Vegte, G.J., Makino, Y., and Wardenier, J. (2007) Effect of Chord Load on Ultimate Strength of CHS X-joints, Int'l J. of Offshore and Polar Eng., Vol.17, No.4, pp.301-308.
- IIW (2008) Static Design Procedure for Welded Hollow Section Joints - Recommendations. International Institute of Welding, IIW Doc. XV-1281, Subcommission XV-E, International Institute of Welding.
- Pecknold, D.A., Ha, C.C., and Mohr, W.C. (2000) Ultimate Strength of DT Tubular Joints with Chord Preloads, Proc. 19th Int'l Conference on Offshore Mechanics and Arctic Engineering.
- API (2007) Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design, API RP2A, American Petroleum Institute.
- Dier, A.F. and Lalani, M. (1998) New Code Formulations for Tubular Joint Static Strength, Proc. 8th Int'l Symposium on Tubular Structures, Tubular Structures VIII, pp.107-116.
- ISO (2004) Petroleum and Natural Gas Industries - Fixed Steel Offshore Structures, ISO DIS-19902, International Organization of Standardization.
- Qian, X.D., Choo, Y.S., van der Vegte, G.J., and Wardenier, J. (2008) Evaluation of the New IIW CHS Strength Formula for Thick-Walled Joints, Proc. 12th Int'l Symposium on Tubular Structures, Tubular Structures XII, pp.271-279.
- Fleischer, O., Herion, S., and Puthli, R. (2008) Numerical Investigation on the Static Behaviour of CHS X-Joints Made of High Strength Steels, Proc. 12th Int'l Symposium on Tubular Structures, Tubular Structures XII, pp.597-605.
- Puthli, R., Ummenhofer, T., Bucak, O., Herion, S., Fleischer, O., Fischl, A., and Josat, O. (2010) Adaption and Extension of the Valid Design Formulae for Joints Made of High Strength Steels up to S690 for Cold-Formed and Hot-Rolled Sections, Schlussbericht CIDECT Projekt 5BT, CIDECT.
- CEN (2007) Eurocode 3: Design of Steel Structures - Part 1.12: Additional Rules for the Extension of EN 1993 up to Steel Grades S700, European Committee for Standardization, Brussels.
- Lipp, A. and Ummenhofer, T. (2014) Influence of Tensile Chord Stresses on the Strength of Circular Hollow Section Joints, Steel Construction, Ernst & Sohn, Vol.7, No.2, pp.126-132. https://doi.org/10.1002/stco.201410017
- Lipp, A. and Ummenhofer, T. (2015) Influence of Tensile Chord Stresses on the Strength of CHS X-Joints -Experimental and Numerical Investigations, Proc. 15th Int'l Symposium on Tubular Structures, Tubular Structures XV, pp.379-386.
- 이경구, 신용섭, 손은지(2015) 원형강관 X-이음 트러스접합부의 압축 주강관소성화 평가, 한국강구조학회논문집, 한국강구조학회, 제27권, 제5호, pp.447-454. (Lee, K.K., Sin, Y.S., and Son, E. J. (2015) Evaluation of Compressive Chord Plastification of Circular Hollow Section X-joint Truss Connection, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.5, pp.447-454 (in Korean).)
- 오창국, 박장호, 배두병(2016) 항만 및 해양구조용 고강도내식성 원형강관의 축방향 허용압축응력 산정, 한국강구조학회논문집, 한국강구조학회, 제28권, 제4호, pp.263-270. (Oh, C.K., Park, J.H., and Bae, D.B. (2016) Allowable Axial Stress Estimation of Corrosion Resistance Steel Tubes for Port and Offshore Structures, Journal of Korean Society of Steel Construction, KSSC, Vol.28, No.4, pp.263-270 (in Korean).)
- 김경식, 김미진(2017) 10MW급 풍력발전용 원형강관 멀티기둥타워의 부재유용도 개념설계, 한국강구조학회논문집, 한국강구조학회, 제29권, 제3호, pp.205-215. (Kim, K.S. and Kim, M.J. (2017) Member Utilization Concept Design for Hollow Circular Section Multi-column Tower Subjected to 10MW Level Wind Turbines, Journal of Korean Society of Steel Construction, KSSC, Vol.29, No.3, pp.205-215 (in Korean).)
- Lee, C.H., Han, K.H., Uang, C.M., Kim, D.K., Park, C.H., and Kim, J.H. (2013) Flexural Strength and Rotation Capacity of I-Shaped Beams Fabricated From 800-MPa Steel, Journal of Structural Engineering, ASCE, Vol.139, No.6, pp.1043-1058. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000727
- Kim, D.K., Lee, C.H., Han, K.H., Kim, J.H., Lee, S.E., and Sim, H.B. (2014) Strength and Residual Stress Evaluation of Stub Columns Fabricated from 800MPa High Strength Steel, Journal of Constructional Steel Research, Elsevier, Vol.102, pp.111-120. https://doi.org/10.1016/j.jcsr.2014.07.007
- Lu, L.H., De Winkel, G.D., Yu, Y., and Wardenier, J. (1994) Deformation Limit for the Ultimate Strength of Hollow Section Joints, Proc. Sixth Int'l Symposium on Tubular Structures, Tubular Structures VI, pp.341-347.
피인용 문헌
- Structural behavior characteristics of jacket structure according to geometrical condition vol.30, pp.3, 2018, https://doi.org/10.7781/kjoss.2018.30.3.163
- Analytical Study of Compressive Strength of Equal-Width RHS X-Joint vol.31, pp.4, 2017, https://doi.org/10.7781/kjoss.2019.31.4.233