DOI QR코드

DOI QR Code

Mechanical properties of blended cements at elevated temperatures predicted using a fuzzy logic model

  • Beycioglu, Ahmet (Department of Civil Engineering, Technology Faculty, Duzce University) ;
  • Gultekin, Adil (Department of Civil Engineering, Technology Faculty, Duzce University) ;
  • Aruntas, Huseyin Yilmaz (Department of Civil Engineering, Technology Faculty, Gazi University) ;
  • Gencel, Osman (Department of Civil Engineering, Faculty of Engineering, Bartin University) ;
  • Dobiszewska, Magdalena (Department of Civil Engineering, Faculty of Civil and Environmental Engineering and Architecture, UTP University of Sciences and Technology) ;
  • Brostow, Witold (Laboratory of Advanced Polymers and Optimized Materials (LAPOM), Department of Materials Science and Eng. and Department of Physics, University of North Texas)
  • 투고 : 2016.09.07
  • 심사 : 2017.04.22
  • 발행 : 2017.08.25

초록

This study aimed to develop a Rule Based Mamdani Type Fuzzy Logic (RBMFL) model to predict the flexural strengths and compressive strengths of blended cements under elevated temperatures. Clinoptilolite was used as cement substitution material in the experimental stage. Substitution ratios in the cement mortar mix designs were selected as 0% (reference), 5%, 10%, 15% and 20%. The data used in the modeling process were obtained experimentally, after mortar specimens having reached the age of 90 days and exposed to $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$ temperatures for 3 hours. In the RBMFL model, temperature ($C^{\circ}$) and substitution ratio of clinoptilolite (%) were inputs while the compressive strengths and flexural strengths of mortars were outputs. Results were compared by using some statistical methods. Statistical comparison results showed that rule based Mamdani type fuzzy logic can be an alternative approach for the evaluation of the mechanical properties of concrete under elevated temperature.

키워드

참고문헌

  1. Akkurt, S., Tayfur, G. and Can, S. (2004), "Fuzzy logic model for the prediction of cement compressive strength", Cement Concrete Res., 34(8), 1429-1433. https://doi.org/10.1016/j.cemconres.2004.01.020
  2. Anik, D., Boonstra, C. and Mak, J. (1996), Handbook of Sustainable Building: An Environmental Preference Method for Selection of Materials for Use in Construction and Refurbishment, Earthscan Publications Ltd., London, U.K.
  3. Arslan, M.E. and Durmus, A. (2014), "Fuzzy logic approach for estimating bond behavior of lightweight concrete", Comput. Concrete, 14(3), 233-245. https://doi.org/10.12989/cac.2014.14.3.233
  4. Behera, M., Bhattacharyya, S.K., Minocha, A.K., Deoliya, R. and Maiti, S. (2014), "Recycled aggregate from C&D waste & its use in concrete-a breakthrough towards sustainability in construction sector: A review", Constr. Build. Mater., 68, 501-516. https://doi.org/10.1016/j.conbuildmat.2014.07.003
  5. Bilim, C. (2011), "Properties of cement mortars containing clinoptilolite as a supplementary cementitious material", Constr. Build. Mater., 25(8), 3175-3180. https://doi.org/10.1016/j.conbuildmat.2011.02.006
  6. Borosnyoi, A. (2016), "Long term durability performance and mechanical properties of high performance concretes with combined use of supplementary cementing materials", Constr. Build. Mater., 112, 307-324. https://doi.org/10.1016/j.conbuildmat.2016.02.224
  7. Brostow, W. and HaggLobland, H.E. (2016), Materials: Introduction and Applications, Wiley, New York, U.S.A.
  8. Garzon-Roca, J., CreuObrer, M. and Adam, J.M. (2013), "Compressive strength of masonry made of clay bricks and cement mortar: Estimation based on neural networks and fuzzy logic", Eng. Struct., 48(3), 21-27. https://doi.org/10.1016/j.engstruct.2012.09.029
  9. Gencel, O., Koksal, F. and Brostow, W. (2013), "Wear minimisation in concrete with haematite", Mater. Res. Innov., 17(2), 92-97. https://doi.org/10.1179/1433075X12Y.0000000034
  10. Gencel, O., Ozel, C., Koksal, F., Erdogmus, E., Martinez-Barrera, G. and Brostow, W. (2012), "Properties of concrete paving blocks made with waste marble", J. Clean. Prod., 21(1), 62-70. https://doi.org/10.1016/j.jclepro.2011.08.023
  11. Gencoglu, M., Uygunoglu, T., Demir, F. and Guler, K. (2012), "Prediction of elastic modulus of steel fiber reinforced concrete (SFRC) using fuzzy logic", Comput. Concrete, 9(5), 389-402. https://doi.org/10.12989/cac.2012.9.5.389
  12. Juenger, M.C.G. and Siddique, R. (2015), "Recent advances in understanding the role of supplementary cementitious materials in concrete", Cement Concrete Res., 78, 71-80. https://doi.org/10.1016/j.cemconres.2015.03.018
  13. Kaur, A. and Kaur, A. (2012), "Comparison of mamdani-type and sugeno-type fuzzy inference systems for air conditioning system", J. Soft Comput. Eng., 2(2), 2231-2307.
  14. Karra, R.C., Raghunandan, M.E. and Manjunath, B. (2016), "Partial replacement of fine aggregates with laterite in GGBSblended-concrete", Adv. Concrete Constr., 4(3), 221-230. https://doi.org/10.12989/acc.2016.4.3.221
  15. Kim, S.J., Yang, K.H., Lee, K.H. and Yi, S.T. (2016), "Mechanical properties and adiabatic temperature rise of low heat concrete using ternary blended cement", Comput. Concrete, 17(2), 271-280. https://doi.org/10.12989/cac.2016.17.2.271
  16. Kurdowski, W. (2014), Cement and Concrete Chemistry, Springer, New York, U.S.A.
  17. Liu, L., Zhang, Y., Zhang, W., Liu, Z. and Zhang, L. (2013), "Investigating the influence of basalt as mineral admixture on hydration and microstructure formation mechanism of cement", Constr. Build. Mater., 48, 434-440. https://doi.org/10.1016/j.conbuildmat.2013.07.021
  18. Lollini, F., Redaelli, E. and Bertolini, L. (2016), "A study on the applicability of the efficiency factor of supplementary cementitious materials to durability properties", Constr. Build. Mater., 120, 2284-2292.
  19. Malhotra, V.M. (2000), Role of Supplementary Cementing Materials in Reducing Greenhouse Gas Emissions, Concrete Technology for a Sustainable Development in the 21st Century, E&FN Spon, London, U.K.
  20. Mamdani, E.H. and Assilian, S. (1975), "An experiment in linguistic synthesis with a fuzzy logic controller", J. Man-Mach. Stud., 7(1), 1-13. https://doi.org/10.1016/S0020-7373(75)80002-2
  21. Martinez-Barrera, G., Vigueras-Santiago, E., Gencel, O. and HaggLobland, H.E. (2011), "Polymer concretes: A description and methods for modification and improvement", J. Mater. Ed. 33(1), 37.
  22. MATLAB Fuzzy Logic $Toolbox^{TM}$ User's Guide Release (2012b).
  23. Mishra, S. and Siddiqui, N.A. (2014), "A review on environmental and health impacts of cement manufacturing emissions", J. Geol. Agricult. Environ. Sci., 2(3), 26-31.
  24. Neeraj, J. (2012), "Effect of nonpozzolanic and pozzolanic mineral admixtures on the hydration behavior of ordinary Portland cement", Constr. Build. Mater., 27(1), 39-44. https://doi.org/10.1016/j.conbuildmat.2011.08.006
  25. Neville, A.M. (2011), Properties of Concrete, Pearson Education Ltd, New York, U.S.A.
  26. Omid, M. (2011), "Design of an expert system for sorting pistachio nuts through decision tree and fuzzy logic classifier", Exp. Syst. Appl., 38(4), 4339-4347. https://doi.org/10.1016/j.eswa.2010.09.103
  27. Pani, A.K. and Mohanta, H.K. (2014), "Soft sensing of particle size in a grinding process: Application of support vector regression, fuzzy inference and adaptive neuro fuzzy inference techniques for online monitoring of cement fineness", Powd. Technol., 264, 484-497. https://doi.org/10.1016/j.powtec.2014.05.051
  28. Paris, J.M., Roessler, J.G., Ferraro, C.C., DeFord, H.D. and Townsend, T.G. (2016), "A review of waste products utilized as supplements to portland cement in concrete", J. Clean. Prod., 121, 1-18. https://doi.org/10.1016/j.jclepro.2016.02.013
  29. Saraya, M.E.I. (2014), "Study physico-chemical properties of blended cements containing fixe amount of silica fume, blast furnace slag, basalt and limestone, a comparative study", Constr. Build. Mater., 72, 104-112. https://doi.org/10.1016/j.conbuildmat.2014.08.071
  30. Topcu, I.B., Karakurt, C. and Saridemir, M. (2008), "Predicting the strength development of cements produced with different pozzolans by neural network and fuzzy logic", Mater. Des., 29(10), 1986-1991. https://doi.org/10.1016/j.matdes.2008.04.005
  31. Uygunoglu, T., Topcu, I.B., Gencel, O. and Brostow, W. (2012), "The effect of fly ash content and types of aggregates on the properties of pre-fabricated concrete interlocking blocks (PCIBs)", Constr. Build. Mater., 29, 180.
  32. Van Oss, H.G. and Padovani, A.C. (2003), "Cement manufacture and the environment. Part II: Environmental challenges and opportunities", J. Industr. Ecol., 7(1), 93-126. https://doi.org/10.1162/108819803766729212

피인용 문헌

  1. Microstructural Differences in Response of Thermoresistant (Ceramic) and Standard (Granite) Concretes on Heating. Studies Using SEM and Nonstandard Approaches to Microtomography and Mercury Intrusion Porosimetry Data vol.11, pp.7, 2018, https://doi.org/10.3390/ma11071126