Journal of the Microelectronics and Packaging Society (마이크로전자및패키징학회지)

The Korean Microelectronics and Packaging Society (한국마이크로전자및패키징학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Post-Annealing Condition on the Peel Strength of Screen-printed Ag Film and Polyimide Substrate

후속 열처리조건이 스크린 프린팅 Ag 박막과 폴리이미드 사이의 필강도에 미치는 영향

  • 배병현 ((주)비츠로테크) ;
  • 이현철 ((주)스태츠칩팩코리아) ;
  • 손기락 (안동대학교 신소재공학부 청정에너지소재기술연구센터) ;
  • 박영배 (안동대학교 신소재공학부 청정에너지소재기술연구센터)
  • Received : 2017.06.08
  • Accepted : 2017.06.26
  • Published : 2017.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Effect of post-annealing treatment times at $200^{\circ}C$ on the peel strength of screen-printed Ag film/polyimide substrate were systematically investigated by $180^{\circ}$ peel test for thermal reliability assessment of printed interconnect. Initial peel strength around 16.7 gf/mm increased up to 29.4 gf/mm after annealing for 24hours, and then sharply decreased to 22.3, 3.6, 0.6, and 0.1 gf/mm after 48, 100, 250, and 500 hours, respectively. Ag-O-C chemical bonding as well as binder organic bridges formations seemed to be responsible for interfacial adhesion improvement after the initial annealing treatment, while excessive Cu oxide formation at Cu/Ag interface seems to be closely related to sharp decrease in peel strength for longer annealing times.

인쇄전자소자 금속 배선의 고온 신뢰성 평가를 위해 스크린 프린팅 기법으로 도포된 Ag 박막과 폴리이미드 기판 사이의 계면접착력을 $200^{\circ}C$ 후속 열처리 시간에 따라 $180^{\circ}$ 필 테스트를 통해 평가하였고, 박리 계면 미세구조를 분석하였다. 후속 열처리 전 필 강도는 약 16.7 gf/mm 이었고, 열처리 24 시간 후 필 강도는 29.4 gf/mm까지 증가하였는데, 이는 초기 열처리에 의해 접합계면에서 Ag-O-C 화학 결합의 증가와 바인더의 organic bridges 효과가 주 원인인 것으로 판단된다. 한편, 열처리 시간이 48, 100, 250, 500 시간으로 더욱 증가함에 따라 필 강도는 각각 22.3, 3.6, 0.6, 0.1 gf/mm으로 급격히 감소하는 거동을 보였다. 이는 $200^{\circ}C$의 고온에서 장시간 노출되었을 때 Cu/Ag 계면 산화막 형성이 주 원인인 것으로 판단된다.

Keywords

References

  1. B. I. Noh, and S. B. Jung, "Effect of Ni-Cr Layer on Adhesion Strength of Flexible Copper Clad Laminate", J. Electron. Mater., 38(1), 46 (2009). https://doi.org/10.1007/s11664-008-0543-z
  2. J. Jang, and T. Earmme, "Interfacial study of polyimide/copper system using silane-modified polyvinylimidazoles as adhesion promoters", Polymer, 42(7), 2871 (2001). https://doi.org/10.1016/S0032-3861(00)00701-1
  3. K. W. Lee, and A. Viehbeck, "Wet-process surface modification of dielectric polymers: {Adhesion} enhancement and metallization", IBM J. Res. Dev., 38(4), 457 (1994). https://doi.org/10.1147/rd.384.0457
  4. S. C. Park, and Y. B. Park, "Effect of CF4 plasma treatment on the interfacial fracture energy between inkjet-printed Ag and flexible polyimide films", Surf. Coat. Tech., 205(2), 423 (2010). https://doi.org/10.1016/j.surfcoat.2010.07.005
  5. S. C. Park, K. J. Min, K. H. Lee, Y. S. Jeong, and Y. B. Park, "Effects of Temperature and Humidity Treatment Conditions on the Interfacial Adhesion Energy between the Electroless-Plated Ni and Polyimide", Jpn. J. Appl. Phys., 49(8S1), 08JK01 (2010).
  6. I. H. Lee, S. H. Kim, J. H. Yun, I. K. Park, and T. S. Kim, "Interfacial toughening of solution processed Ag nanoparticle thin films by organic residuals", Nanotechnology, 23(48), 485704 (2012). https://doi.org/10.1088/0957-4484/23/48/485704
  7. H. S. Han, S. W. Kwak, B. M Kim, T. M. Lee, S. H. Kim, and I. Y. Kim, "Effect of PVP(polyvinylpyrrolidone) on the Ag Nano Ink Property for Reverse Offset Printing", Kor. J. Mater. Res., 22(9), 476 (2012). https://doi.org/10.3740/MRSK.2012.22.9.476
  8. D. J. Kim, S. H. Jeong, H. J. Shin, Y. N. Xia, and J. H. Moon, "Heterogeneous Interfacial Properties of Ink-Jet-Printed Silver Nanoparticulate Electrode and Organic Semiconductor", Adv. Mater., 20(16), 3084 (2008). https://doi.org/10.1002/adma.200702750
  9. Y. B. Park, I. S. Park, and J. Yu, "Interfacial fracture energy measurements in the Cu/Cr/polyimide system", Mater. Sci. Eng: A., 266(1), 261 (1999). https://doi.org/10.1016/S0921-5093(98)01117-4
  10. Y. B. Park, and J. Yu, "Effects of Electroplated Cu Thickness and Polyimide Plasma Treatment Conditions on the Interfacial Fracture Mechanics Parameters in the Cu/Cr/Polyimide System", Met. Mater. Int., 7(2), 123 (2001). https://doi.org/10.1007/BF03026950
  11. J. Y. Song, and J. Yu, "Analysis of the T-peel strength in a Cu/Cr/Polyimide system", Acta Mater., 50(16), 3985 (2002). https://doi.org/10.1016/S1359-6454(02)00197-0
  12. M. H. Kim, and K. W. Lee, "The Effects of Ion Beam Treatment on the Interfacial Adhesion of Cu/polyimide System", Met. Mater. Int., 12(5), 425 (2006). https://doi.org/10.1007/BF03027710
  13. S. H. Kim, S. H. Na, N. E. Lee, Y. W. Nam, and Y. H. Kim, "Effect of surface roughness on the adhesion properties of Cu/Cr films on polyimide substrate treated by inductively coupled oxygen plasma", Surf. Coat. Tech., 200(7), 2072 (2005). https://doi.org/10.1016/j.surfcoat.2005.05.021
  14. I. S. Park, E. C. Ahn, J. Yu and H. Y. Lee, "Cohesive failure of the Cu/polyimide system", Mater. Sci. Eng: A., 282(1), 137 (2000). https://doi.org/10.1016/S0921-5093(99)00763-7
  15. S. C. Park, K. J. Min, K. H. Lee, Y. S. Jeong, and Y. B. Park, "Effect of Annealing on the Interfacial Adhesion Energy between Electroless-Plated Ni and Polyimide", Met. Mater. Int., 17(1), 111 (2011). https://doi.org/10.1007/s12540-011-0215-z
  16. S. C. Park, J. W. Kim, K. H. Kim, S. H. Park, Y. M. Lee, and Y. B. Park, "Interfacial Adhesion between Screen-Printed Ag and Epoxy Resin-Coated Polyimide", J. Microelectron. Packag. Soc., 17(1), 41 (2010).
  17. B. S. Min, K. H. Seo, W. S. Chung, I. S. Lee, and S. C. Park, "Application of Plasma Cleaning for Plating Pretreatment", J. Kor. Inst. Met. & Mater., 40(8), 886 (2002).
  18. K. J. Min, S. C. Park, K. H. Lee, Y. S. Jeong, and Y. B. Park, "Effect of Wet Chemical Pretreatment Conditions on the Interfacial Adhesion Energy between Electroless-Plated Ni and Polyimide Films", Jpn. J. Appl. Phys., 48(8S1), 08HL03 (2010).
  19. J. K. Kim, K. Son, and Y. B. Park, "Interfacial Adhesion and Reliability between Epoxy Resin and Polyimide for Flexible Printed Circuit Board", J. Microelectron. Packag. Soc., 21(1), 75. (2017).
  20. R. A. Zarate, F. Hevia, S. Fuentes, V. M. Fuenzalida, and A. Zuniga, "Novel route to synthesize CuO nanoplatelets", J. Solid. State. Chem., 180(4), 1464 (2007). https://doi.org/10.1016/j.jssc.2007.01.040
  21. M. A. Dar, Y. S. Kim, W. B. Kim, J. M. Sohn, and H. S. Shin, "Structural and magnetic properties of CuO nanoneedles synthesized by hydrothermal method", Appl. Surf. Sci., 254(22), 7477 (2008). https://doi.org/10.1016/j.apsusc.2008.06.004

Cited by

  1. O2 플라즈마 전처리 및 후속 열처리 조건이 Ti 박막과 WPR 절연층 사이의 계면 접착력에 미치는 영향 vol.27, pp.1, 2020, https://doi.org/10.6117/kmeps.2020.27.1.0037