DOI QR코드

DOI QR Code

Korean Round-Robin Tests Result for New International Program to Assess the Reliability of Emerging Nondestructive Techniques

  • Received : 2016.06.08
  • Accepted : 2016.09.09
  • Published : 2017.06.25

Abstract

The Korea Institute of Nuclear Safety, as a representative organization of Korea, in February 2012 participated in an international Program to Assess the Reliability of Emerging Nondestructive Techniques initiated by the U.S. Nuclear Regulatory Commission. The goal of the Program to Assess the Reliability of Emerging Nondestructive Techniques is to investigate the performance of emerging and prospective novel nondestructive techniques to find flaws in nickel-alloy welds and base materials. In this article, Korean round-robin test results were evaluated with respect to the test blocks and various nondestructive examination techniques. The test blocks were prepared to simulate large-bore dissimilar metal welds, small-bore dissimilar metal welds, and bottom-mounted instrumentation penetration welds in nuclear power plants. Also, lessons learned from the Korean round-robin test were summarized and discussed.

Keywords

References

  1. B.G. Braatz, P.G. Heasler, R.M. Meyer, PARENT Quick Blind Round-Robin Test Report, Report No. PNNL-22677, 2014.
  2. S.E. Cumblidge, S.R. Doctor, P.G. Heasler, T.T. Taylor, Results of the Program for the Inspection of Nickel Alloy Components, Report No. NUREG/CR-7019, PNNL-18713, Rev. 1, 2010.
  3. I. Prokofiev, S.E. Cumblidge, A.A. Csontos, B.G. Braatz, S.R. Doctor, New international program to assess the reliability of emerging nondestructive techniques (PARENT), AIP Conf. Proc. 32 (2013) 1097.
  4. B. Lebrun, Y. Jayet, J-C Baboux, Pulsed eddy current signal analysis: application to the experimental detection and characterization of deep flaws in highly conductive materials, NDT&E Int 30 (1997) 163-170. https://doi.org/10.1016/S0963-8695(96)00072-2
  5. K.H. Lee, M.K. Baek, I.H. Park, Estimation of deep defect in ferromagnetic material by low frequency eddy current method, IEEE T. Magn 48 (2012) 3965-3968. https://doi.org/10.1109/TMAG.2012.2202643
  6. I.Z. Abidin, C. Mandache, G.Y. Tian, M. Morozov, Pulsed eddy current testing with variable duty cycle on rivet joints, NDT&E Int 42 (2009) 599-605. https://doi.org/10.1016/j.ndteint.2009.04.001
  7. A. Dillenz, D. Wu, K. Breitruck, G. Busse, Lock-in thermography for depth resolved defect characterization, in: 15th World Conference on Nondestructive Testing, 2000.
  8. X.P.V. Maldague, Theory and Practice of Infrared Technology for Nondestructive Testing, Wiley Series in Microwave and Optical Engineering, New York, 2001.
  9. J.L. Rose, Ultrasonic Waves in Solid Media, Cambridge University Press, UK, 1999.
  10. M. Fink, Time reversal of ultrasonic fields. I. Basic principles, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 39 (1992) 555-566. https://doi.org/10.1109/58.156174
  11. M. Fink, Time-reversed acoustics, Sci. Am (1999) 91-97.
  12. K.Y. Jhang, Applications of nonlinear ultrasonics to the NDE of material degradation, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 47 (2000) 540-548. https://doi.org/10.1109/58.842040
  13. J.B. Kim, K.Y. Jhang, Evaluation of ultrasonic nonlinear characteristics in heat-treated aluminum alloy, Adv. Mater. Sci. Eng 33 (2013) 193-197.