참고문헌
- C. Keller, M.M. Margulies, Z. Hadjem-Hamouche, I. Guillot, Influence of the temperature on the tensile behaviour of a modified 9Cr-1Mo T91 martensitic steel, Mater. Sci. Eng. A 527 (2010) 6758-6764. https://doi.org/10.1016/j.msea.2010.07.021
- N. Baluc, J.L. Boutard, S.L. Dudarev, M. Rieth, J. Brito Correia, B. Fournier, J. Henry, F. Legendre, T. Leguey, M. Lewandowska, R. Lindau, E. Marquis, A. Munoz, B. Radiguet, Z. Oksiuta, Review on the EFDA work programme on nano-structured ODS RAF steels, J. Nucl. Mater. 417 (2011) 149-153. https://doi.org/10.1016/j.jnucmat.2010.12.065
- Y.F. Li, H. Abe, T. Nagasaka, T. Muroga, M. Kondo, Corrosion behavior of 9Cr-ODS steel in stagnant liquid lithium and lead-lithium at 873 K, J. Nucl. Mater. 443 (2013) 200-206. https://doi.org/10.1016/j.jnucmat.2013.07.026
- H.J. Xu, Z. Lu, C.Y. Jia, H. Gao, C.M. Liu, Microstructure and mechanical property of 12Cr oxide dispersion strengthened steel, High Temp. Mater. Proc. 35 (2016) 321-325.
- H.Y. Fu, T. Nagasaka, T. Muroga, A. Kimura, J.M. Chen, Microstructural characterization of a diffusion-bonded joint for 9Cr-ODS and JLF-1 reduced activation ferritic/martensitic steels, Fusion Eng. Des. 89 (2014) 1658-1663. https://doi.org/10.1016/j.fusengdes.2014.02.055
- Y. Li, T. Nagasaka, T. Muroga, A. Kimura, S. Ukai, High-temperature mechanical properties and microstructure of 9Cr oxide dispersion strengthened steel compared with RAFMs, Fusion Eng. Des. 86 (2011) 2495-2499. https://doi.org/10.1016/j.fusengdes.2011.03.004
- E. Gaganidze, J. Aktaa, Assessment of neutron irradiation effects on RAFM steels, Fusion Eng. Des. 88 (2013) 118-128. https://doi.org/10.1016/j.fusengdes.2012.11.020
-
J.C.H. He, F. Wan, K. Sridharan, T.R. Allen, A. Certain, Y.Q. Wu, Response of 9Cr-ODS steel to proton irradiation at
$400^{\circ}C$ , J. Nucl. Mater. 452 (2014) 87-94. https://doi.org/10.1016/j.jnucmat.2014.05.004 - R. Kasada, N. Toda, K. Yutani, H.S. Cho, H. Kishimoto, A. Kimura, Pre- and post-deformation microstructures of oxide dispersion strengthened ferritic steels, J. Nucl. Mater. 367-370 (2007) 222-228. https://doi.org/10.1016/j.jnucmat.2007.03.141
- S. Ohtsuka, S. Ukai, M. Fujiwara, Nano-mesoscopic structural control in 9CrODS ferritic/martensitic steels, J. Nucl. Mater. 351 (2006) 241-246. https://doi.org/10.1016/j.jnucmat.2006.02.006
- H.J. Xu, Z. Lu, C.Y. Jia, D.Z. Feng, C.M. Liu, Influence of mechanical alloying time on morphology and properties of 15Cr-ODS steel powders, High Temp. Mater. Proc. 35 (2016) 473-477.
- D.T. Hoelzer, J. Bentley, M.A. Sokolov, M.K. Miller, G.R. Odette, M.J. Alinger, Influence of particle dispersions on the high-temperature strength of ferritic alloys, J. Nucl. Mater. 367-370 (2007) 166-172. https://doi.org/10.1016/j.jnucmat.2007.03.151
- H.J. Xu, Z. Lu, S. Ukai, N. Oono, C.M. Liu, Effects of annealing temperature on nanoscale particles in oxide dispersion strengthened Fe-15Cr alloy powders with Ti and Zr additions, J. Alloys. Compd. 693 (2017) 177-187. https://doi.org/10.1016/j.jallcom.2016.09.133
- K.A. Darling, R.N. Chan, P.Z. Wong, J.E. Semones, R.O. Scattergood, C.C. Koch, Grain-size stabilization in nanocrystalline FeZr alloys, Scr. Mater. 59 (2008) 530-533. https://doi.org/10.1016/j.scriptamat.2008.04.045
- P. Dou, A. Kimura, R. Kasada, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisaw, F. Abe, TEM and HRTEM study of oxide particles in an Al-alloyed high-Cr oxide dispersion strengthened steel with Zr addition, J. Nucl. Mater. 444 (2014) 441-453. https://doi.org/10.1016/j.jnucmat.2013.10.028
- J. Isselin, R. Kasada, A. Kimura, Corrosion behaviour of 16% Cr-4%Al and 16%Cr ODS ferritic steels under different metallurgical conditions in a supercritical water environment, Corros. Sci. 52 (2010) 3266-3270. https://doi.org/10.1016/j.corsci.2010.05.043
- A. Yabuuchi, M. Maekawa, A. Kawasuso, Influence of oversized elements (Hf, Zr, Ti and Nb) on the thermal stability of vacancies in type 316L stainless steels, J. Nucl. Mater. 430 (2012) 190-193. https://doi.org/10.1016/j.jnucmat.2012.07.005
- D. Murali, B.K. Panigrahi, M.C. Valsakumar, S. Chandra, C.S. Sundar, B. Raj, The role of minor alloying elements on the stability and dispersion of yttria nanoclusters in nanostructured ferritic alloys: an ab initio study, J. Nucl. Mater. 403 (2010) 113-116. https://doi.org/10.1016/j.jnucmat.2010.06.008
- J.H. Lee, R. Kasada, A. Kimura, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisawa, F. Abe, Influence of alloy composition and temperature on corrosion behavior of ODS ferritic steels, J. Nucl. Mater. 417 (2011) 1225-1228. https://doi.org/10.1016/j.jnucmat.2010.12.279
- D.B. Williams, C.B. Carter, Transmission Electron Microscopy-A Textbook for Materials Science, second edition, Springer, New York, 2009.
- D.B. Williams, C.B. Carter, Transmission Electron Microscopy, second edition, Plenum Press, New York and London, 1996.
- Y.F. Li, H. Abe, F. Li, Y. Satoh, Y. Matsukawa, T. Matsunaga, T. Muroga, Grain structural characterization of 9Cr-ODS steel aged at 973 K up to 10,000 h by electron backscatter diffraction, J. Nucl. Mater. 455 (2014) 568-572. https://doi.org/10.1016/j.jnucmat.2014.08.047
- Z. Lu, R.G. Faulkner, N. Riddle, F.D. Martino, K. Yang, Effect of heat treatment on microstructure and hardness of Eurofer 97, Eurofer ODS and T92 steels, J. Nucl. Mater. 386-388 (2009) 445-448. https://doi.org/10.1016/j.jnucmat.2008.12.152
-
C.G. Panait, W. Bendick, A. Fuchsmann, A.-F. Gourgues-Lorenon, J. Besson, Study of the microstructure of the Grade 91 steel after more than 100,000 h of creep exposure at
$600^{\circ}C$ , ISIJ Int. 87 (2010) 326-335. - A. Aghajani, Ch. Somsen, G. Eggeler, On the effect of long-term creep on the microstructure of a 12% chromium tempered martensite ferritic steel, Acta Mater. 57 (2009) 5093-5106. https://doi.org/10.1016/j.actamat.2009.07.010
- Y. Uchida, S. Ohnuki, N. Hashimoto, T. Suda, T. Nagai, T. Shibayama, K. Hamada, N. Akasaka, S. Yamashita, S. Ohstuka, T. Yoshitake, Effect of minor alloying element on dispersing nano-particles in ODS steel, Mater. Res. Soc. Symp. Proc. 981 (2007) 107-112.
- K.A. Darling, B.K. VanLeeuwen, J.E. Semones, C.C. Koch, R.O. Scattergood, L.J. Kecskes, S.N. Mathaudhu, Stabilized nanocrystalline iron-based alloys: guiding efforts in alloy selection, Mater. Sci. Eng. A. 528 (2011) 4365-4371. https://doi.org/10.1016/j.msea.2011.02.080
- P.M. Kelly, Progress report on recent advances in physical metallurgy: (C) the quantitative relationship between microstructure and properties in two-phase alloys, Int. Metals Rev. 18 (1973) 31-36. https://doi.org/10.1179/imr.1973.18.1.31
-
C. Hin, B.D. Wirth, Formation of
$Y_2O_3$ nanoclusters in nanostructured ferritic alloys: modeling of precipitation kinetics and yield strength, J. Nucl. Mater. 402 (2010) 30-37. https://doi.org/10.1016/j.jnucmat.2010.04.020 - A. Steckmeyer, M. Praud, B. Fournier, J. Malaplate, J. Garnier, J.L. Bechade, I. Tournie, A. Tancray, A. Bougault, P. Bonnaillie, Tensile properties and deformation mechanisms of a 14Cr ODS ferritic steel, J. Nucl. Mater. 405 (2010) 95-100. https://doi.org/10.1016/j.jnucmat.2010.07.027
- S. Ukai, S. Ohtsuka, T. Kaito, H. Sakasegawa, N. Chikata, S. Hayashi, S. Ohnuki, High-temperature strength characterization of advanced 9Cr-ODS ferritic steels, J. Nucl. Mater. 510-511 (2009) 115-120.
- J.W. Martin, Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, New York, 1980.
- S. Ukai, T. Okuda, M. Fujiwara, T. Kobayshi, S. Mizuta, H. Nakashima, Characterization of high temperature creep properties in recrystallized 12Cr-ODS ferritic steel claddings, J. Nucl. Sci. Technol. 39 (2002) 872-879.
- J.H. Schneibel, M. Heilmaier, W. Blum, G. Haseman, T. Shanmugasundaram, Temperature dependence of the strength of fine- and ultrafine-grained materials, Acta Mater. 59 (2011) 1300-1308. https://doi.org/10.1016/j.actamat.2010.10.062
- B. Mouawad, X. Boulnat, D. Fabregue, M. Perez, Y. de Carlan, Tailoring the microstructure and the mechanical properties of ultrafine grained high strength ferritic steels by powder metallurgy, J. Nucl. Mater. 465 (2015) 54-62. https://doi.org/10.1016/j.jnucmat.2015.05.053
- J. Friedel, Dislocations, Addison-Wesley, U.S.A., 1964.
- T. Muroga, T. Nagasaka, Y. Li, H. Abe, S. Ukai, A. Kimura, T. Okuda, Fabrication and characterization of reference 9Cr and 12Cr-ODS low activation ferritic/martensitic steels, Fusion Eng. Des. 89 (2014) 1717-1722. https://doi.org/10.1016/j.fusengdes.2014.01.010
- J.H. Schneibel, C.T. Liu, M.K. Miller, M.J. Mills, P. Sarosi, M. Heilmaier, D. Sturm, Ultrafine-grained nanocluster-strengthened alloys with unusually high creep strength, Scripta Mater. 61 (2009) 793-796. https://doi.org/10.1016/j.scriptamat.2009.06.034
- C.L. Fu, M. Krcmar, G.S. Painter, X.-Q. Chen, Vacancy mechanism of high oxygen solubility and nucleation of stable oxygen-enriched clusters in Fe, Phys. Rev. Lett. 99 (2007) 225502-1-225502-4. https://doi.org/10.1103/PhysRevLett.99.225502
- M.K. Miller, D.T. Hoelzer, E.A. Kenik, K.F. Russell, Stability of ferritic MA/ODS alloys at high temperatures, Intermetallics 13 (2005) 387-392. https://doi.org/10.1016/j.intermet.2004.07.036
-
C.R. Stanek, C. Jiang, B.P. Uberuaga, K.E. Sickafus, A.R. Cleave, R.W. Grimes, Predicted structure and stability of
$A_4\;B_3\;O_{12}\;{\delta}$ -phase compositions, Phys. Rev. B 80 (2009) 174101-1-174101-11. https://doi.org/10.1103/PhysRevB.80.174101
피인용 문헌
- Structure and composition of oxides in FeCrAl ODS alloy with Zr addition vol.33, pp.15, 2017, https://doi.org/10.1080/02670836.2017.1318245
- Implementation of GIXRD analysis and nanoindentation technique to study functional properties of materials – ODS case study vol.1166, pp.None, 2017, https://doi.org/10.1016/j.molstruc.2018.04.006
- Effect of Y/Zr Ratio on Inclusions and Mechanical Properties of 9Cr-RAFM Steel Fabricated by Vacuum Melting vol.28, pp.2, 2017, https://doi.org/10.1007/s11665-018-3838-0
- Effect of Zr on microstructure and high-temperature mechanical properties of austenitic heat resistant steel vol.6, pp.11, 2017, https://doi.org/10.1088/2053-1591/ab47da
- Development of a micro-scale Y-Zr-O oxide-dispersion-strengthened steel fabricated via vacuum induction melting and electro-slag remelting vol.51, pp.6, 2019, https://doi.org/10.1016/j.net.2019.05.001
- ODS EUROFER Steel Strengthened by Y-(Ce, Hf, La, Sc, and Zr) Complex Oxides vol.9, pp.11, 2017, https://doi.org/10.3390/met9111148
- Effects of yttrium and zirconium additions on inclusions and mechanical properties of a reduced activation ferritic/martensitic steel vol.27, pp.2, 2017, https://doi.org/10.1007/s42243-019-00332-9
- Evolution of Microstructures and Mechanical Properties of Zr-Containing Y-CLAM During Thermal Aging vol.33, pp.6, 2017, https://doi.org/10.1007/s40195-020-01011-5
- Microstructural and Mechanical Behavior of Al6061-Graphene Oxide Nanocomposites vol.26, pp.6, 2017, https://doi.org/10.1007/s12540-019-00361-9
- The probability-correlative oxide particle strengthening in solid-solution alloys vol.55, pp.27, 2020, https://doi.org/10.1007/s10853-020-04948-1
- Synthesis and microstructure evaluation of ODS steel 316L with zirconia dispersion vol.1912, pp.1, 2017, https://doi.org/10.1088/1742-6596/1912/1/012002
- Fabrication of Austenitic ODS 316L Stainless Steel with Arc Plasma Sintering Method vol.1912, pp.1, 2017, https://doi.org/10.1088/1742-6596/1912/1/012003
- Progress of zirconium alloying in iron-based alloys and steels vol.37, pp.9, 2017, https://doi.org/10.1080/02670836.2021.1958488
- The Effect of Zr Addition on Melting Temperature, Microstructure, Recrystallization and Mechanical Properties of a Cantor High Entropy Alloy vol.14, pp.20, 2017, https://doi.org/10.3390/ma14205994
- Oxidation behaviour and microstructure evolution of Zr-containing steel under continuous high-temperature exposure vol.275, pp.None, 2017, https://doi.org/10.1016/j.matchemphys.2021.125324