Wind and Structures

  • 제25권2호
  • /
  • Pages.177-193
  • /
  • 2017
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Computational study of the wind load on a free-form complex thin shell structure

  • Rodrigues, A. Moret (CEris, ICIST, Department of Civil Engineering, Architecture and Georesources, Instituto Superior Tecnico, Universidade de Lisboa) ;
  • Tome, Ana (CEris, ICIST, Department of Civil Engineering, Architecture and Georesources, Instituto Superior Tecnico, Universidade de Lisboa) ;
  • Gomes, M. Gloria (CEris, ICIST, Department of Civil Engineering, Architecture and Georesources, Instituto Superior Tecnico, Universidade de Lisboa)
  • 투고 : 2017.04.20
  • 심사 : 2017.07.14
  • 발행 : 2017.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

The accelerated development of new materials, technologies and construction processes, in parallel with advances in computational algorithms and ever growing computational power, is leading to more daring and innovative architectural and structural designs. The search for non-regular building shapes and slender structures, as alternative to the traditional architectural forms that have been prevailing in the building sector, poses important engineering challenges in the assessment of the strength and mechanical stability of non-conventional structures and systems, namely against highly variable actions as wind and seismic forces. In case of complex structures, laboratory experiments are a widely used methodology for strength assessment and loading characterization. Nevertheless, powerful numerical tools providing reliable results are also available today and able to compete with the experimental approach. In this paper the wind action on a free-form complex thin shell is investigated through 3D-CFD simulation in terms of the pressure coefficients and global forces generated. All the modelling aspects and calibrating process are described. The results obtained showed that the CFD technique is effective in the study of the wind effects on complex-shaped structures.

키워드

참고문헌

  1. Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C. (2014), Shell Structures for Architecture: Form Finding and optimization, (1st Ed.), Routledge, London.
  2. Amin, J.A. and Ahuja, A.K. (2011), "Experimental study of wind-induced pressures on buildings of various geometries", Eng. Sci. Technol. Int. J., 3, 1-19. https://doi.org/10.7763/IJET.2011.V3.191
  3. ANSYS Fluent (2012), ANSYS Fluent Release 14.5, Theory Guide, ANSYS Inc., U.S.A.
  4. Baskaran, A. and Kashef, A. (1996), "Investigation of air flow around buildings using computational fluid dynamics techniques", J. Struct. Eng. - ASCE, 18 (11), 861-873. https://doi.org/10.1016/0141-0296(95)00154-9
  5. Behrouzi, F., Sidik, N.A.C., Nakisa, M. and Witri, A. (2013), "Numerical prediction of wind flow around the high-rise buildings by two equations turbulence models for urban street canyon", Proceedings of the 15th International Conference on Mathematical and Computational Methods in Science and Engineering (MACMESE '13), Kuala Lumpur, Malaysia, April.
  6. Bienkiewicz, B. and Sun, Y. (1992), "Local wind loading on the roof of a low-rise building", J. Wind. Eng. Ind. Aerod., 45, 11-24. https://doi.org/10.1016/0167-6105(92)90003-S
  7. Blocken, B., Stathopoulos, T., Carmeliet, J. and Hensen, J.L.M. (2011), "Application of computational fluid dynamics in building performance simulation for the outdoor environment: an overview", J. Build. Perform. Simul., 4(2), 157-184. https://doi.org/10.1080/19401493.2010.513740
  8. Blocken, B., Stathopoulos, T. and Carmeliet, J. (2007), "CFD simulation of the atmospheric boundary layer-wall function problems", Atmos. Environ., 41, 238-252. https://doi.org/10.1016/j.atmosenv.2006.08.019
  9. Eurocode (2007), Actions on Structures. Part 1-4: General actions-Wind actions, European Committee for Standardization, Brussels, Belgium.
  10. Evola, G. and Popov, V. (2006), "Computational analysis of wind driven natural ventilation in buildings", Energy Build., 38, 491-501. https://doi.org/10.1016/j.enbuild.2005.08.008
  11. Franke, J., Hellsten, A., Schlnzen, H. and Carissimo, B. (2007), "Best practice guideline for the CFD simulation of flows in the urban environment", COST Action 732: Quality assurance and improvement of microscale meteorological models, University of Hamburg Meteorological Institute, Hamburg.
  12. Gomes, M.G., Moret Rodrigues, A. and Mendes, P. (2005), "Experimental and numerical study of wind pressures on irregular-plan shapes", J. Wind Eng. Ind. Aerod., 93, 741-756. https://doi.org/10.1016/j.jweia.2005.08.008
  13. Gorle, C., van Beeck, J., Rambaud, P. and Van Tendeloo, G. (2009), "CFD modelling of small particle dispersion: The influence of the turbulence kinetic energy in the atmospheric boundary layer", Atmos. Environ., 43, 673-681. https://doi.org/10.1016/j.atmosenv.2008.09.060
  14. Irtaza, H., Beale, R.G., Godley, M.H.R. and Jameel, A. (2013), "Comparison of wind pressure measurements on Silsoe experimental building from full-scale observation, wind-tunnel experiments and various CFD techniques", Int. J. Eng. Sci. Technol., 5, 28-41.
  15. Lateb, M., Masson, C., Stathopoulos, T. and Bedard, C. (2010), "Influence of turbulence models on pollutant dispersion studies around a building complex", Proceedings of the 5th International Symposium on Computational Wind Engineering (CWE2010), Chapel Hill, North Carolina, USA, May.
  16. Liu, C., Leung, D.Y.C., Man, A.C.S. and Chan, P.W. (2010), "Computational fluid dynamics simulation of the wind flow over an airport terminal building", Appl. Phys. Eng., 11(6), 389-401.
  17. Liu, X., Niu, J. and Kwok, K.C.S. (2013), "Evaluation of RANS turbulence models for simulating wind-induced mean pressures and dispersions around a complex-shaped high-rise building", Build. Simul., 6, 151-164. https://doi.org/10.1007/s12273-012-0097-0
  18. Lopes, M.F.P., Paixao Conde, J.M., Gomes, M.G. and Ferreira, J.G. (2010), "Numerical calculation of the wind action on buildings using Eurocode 1 atmospheric boundary layer velocity profiles", Wind Struct., 13 (6), 487-498. https://doi.org/10.12989/was.2010.13.6.487
  19. McNeel R. and Associates (2003), Rhinoceros user guide: NURBS modeling for Windows: Version 3.0, Robert McNeel & Associates, Seattle, Washington, USA.
  20. Montazeri, H. and Blocken, B. (2013), "CFD simulation of wind-induced pressure coefficients on buildings with and without balconies: validation and sensitivity analysis", Build. Environ., 60, 137-149. https://doi.org/10.1016/j.buildenv.2012.11.012
  21. Murakami, S. and Mochida, A. (1988), "3-D numerical simulation of air flow around a cubic model by means of the k-$\varepsilon$ model", J. Wind Eng. Ind. Aerod., 31, 283-303. https://doi.org/10.1016/0167-6105(88)90009-8
  22. Peterka, J.A. (1983), "Selection of local peak pressure coefficients for wind tunnel studies of building", J. Wind Eng. Ind. Aerod., 13, 477-488. https://doi.org/10.1016/0167-6105(83)90166-6
  23. Richards, P.J. and Hoxey, R.P. (1993), "Appropriate boundary conditions for computational wind engineering models using the k-$\varepsilon$ turbulence model", J. Wind Eng. Ind. Aerod., 46-47, 145-153. https://doi.org/10.1016/0167-6105(93)90124-7
  24. Rogers, H. (2009), "Structural form in History and the construction of complex forms", Proceedings of 3rd International Congress on Construction History, Brandenburg, Germany, May.
  25. Tome, A., Vizotto, I. and Eduardo, J. (2014), "Guidelines for supporting the production of concrete shells scale models for wind tunnel aerodynamic studies", 5as Jornadas Portuguesas de Engenharia de Estruturas (JPEE), Lisbon, Portugal, November (in Portuguese).
  26. Vizotto, I. and Ferreira, A.M. (2015), "Wind force coefficients on hexagonal free form shell", Eng. Struct., 83, 17-29. https://doi.org/10.1016/j.engstruct.2014.10.038
  27. Yakhot, V., Orszag, S.A., Thangam, S., Gatski, T.B. and Speziale, C.G. (1992), "Development of turbulence models for shear flows by a double expansion technique", Phys. Fluids., 4, 1510-1520. https://doi.org/10.1063/1.858424
  28. Yazid, A.W.M., Sidik, N.A.C., Salim, S.M. and Yusoff, N.H.M. (2013), "Numerical prediction of air flow within street canyons based on different two-equation k-$\varepsilon$ models", Proceedings of the 2nd International Conference on Mechanical Engineering Research (ICMER2013), Pahang, Malaysia, July.
  29. Zisis, I. and Stathopoulos, T. (2009), "Wind tunnel experiments on a patio cover attached to a low-rise building", Proceedings of the 11th Americas Conference on Wind Engineering, San Juan, Puerto Rico, June.